Masters Dissertations : Engineering: Recent submissions

Now showing items 721-740 of 1754

Impact of UPFC on Sudanese National Grid

Hassan, Mohammed Mirghani; Supervisor,- Mohamed Osman Hassan (Sudan University of Science and Technology, 2016-02-10)

The problem of improving the voltage profile and reducing power losses in electrical networks is a task that must be solved in an optimal manner. Therefore, placement of FACTS devices in suitable location to control ...
STUDY OF VARIABLE SPEED RANGE OF INDUCTION MOTOR

ELSHAZALI, ELSHAZALI ELHUSIEN; Supervisor,- MUSSAB MOHAMMED AHMED (Sudan University of Science and Technology, 2016-01-10)

Induction motors (IM) are the most widely used electrical motors due to their reliability, low cost and robustness. The need for variable speed of an induction motor arises in certain industrial applications and this is ...
Performance Evaluation of Cross layer Design in Multi-hop Relay WiMAX Networks

Alzubair, Thimar Alzubair Ibrahim; Supervisor,- Fath Elrahman Ismael Khalifa (Sudan University of Science and Technology, 2015-04-10)

Many cross-layer design schemes have been proposed to overcome the limitations of protocol architectures in following strict layering principles. The core idea is to maintain the functionalities associated to the original ...
Investigation of Ultimate Resisting Moments of R.C. Slabs systems using Yield Line Theory, BS8110 and Computer Software Programs

Ahmed, Izeldein Jadalla Izeldein; Supervisor,- Fathelrahaman Mohammed Adam (Sudan University of Science and Technology, 2015-12-10)

In this study, different types of reinforced concrete slabs system of different support conditions have been analyzed using yield line theory to determine the maximum resisting moment, the result of resisting moments ...
IMPLEMENTATION OF SMART HOME SYSTEM USING WIRELESS TECHNOLOGY

Abusail, EsraAltigani Ahmed; Supervisor,- Awadalla Taifour Ali (Sudan University of Science and Technology, 2015-11-10)

In recent years, home automation systems have seen rapid changes due to introduction of various wireless technologies. The explosion in the field of wireless technologies has seen the emergence of many standards, especially ...
Automated Energy Meter Reading by Using Radio Frequency Technology

ALi, Mohammed Hussein Ahmed; Supervisor,- Ibrahim Khider (Sudan University of Science and Technology, 2015-05-10)

Radio Frequency based wireless remote control system can be used to control the output load from remote place. In this thesis a circuit of RF module ( Tx/Rx) for wireless remote control has been used for automatic collecting ...
Battery Charging Control for Wind Energy Generation System

Hamada, AbualgasimAbdelwhab Ahmed; Supervisor,- NagmeldeenAbdo Mustafa (Sudan University of Science and Technology, 2016-03-10)

Most variable speed wind turbines have pitch angle control mechanisms and one of their objectives is to extract maximum power from available wind speed, by adjusting pitch angles of wind turbine. In this research, the use ...
واقع تطبيق نظام إدارة الجودة الشاملة في صناعة التشييد في السودان

حسين, محمد جعفر محمد; مشرف,- صلاح الدين عبدالعزيز عجباني (جامعة السودان للعلوم والتكنولوجيا, 2015-12-10)

نظام ادارة الجودة الشاملة هو نظام متكامل يهدف إلى تحقيق الجودة العالية للمنتج وحيث أنه يساعد في اختيار المكونات ومتابعة المنتج ومراقبة جميع العمليات التي ينطوي عليها تصنيع هذا المنتج لأنه يعمل على اختيار الأفضل و أسهل طريقة ...
Detection of Irregularities of Planning Laws in Residential Areas by using Remote Sensing and Geographical Information Systems

Salih, Hiba Mohammed Alhassan; Supervisor,- Abdel Rahim El Hag Abdel Aziz (Sudan University of Science and Technology, 2015-12-10)

Urban development is the future vision for urban and transportation development to face economic, demographic and environmental challenges that needed, for sustainable development. Urban development incision mainly from ...
IMPLEMENTATION AND POTENTIAL BENEFITS OF BUILDING INFORMATION MODELING (BIM) IN SUDAN CONSTRUCTION INDUSTRY

OSMAN, MOHAMMED KHIDIR; Supervisor,- SALAH AJABAN (Sudan University of Science and Technology, 2016-02-10)

The Sudan construction industry has long been criticized for being inefficient, unproductive, and resource consuming. This thesis proposes the implementation of Building Information Modeling (BIM) in Sudan construction ...
Influence of Planning Process in the Execution of Construction Project in Sudan

Elamin, Ala Ahmed Eltigani Mohammed; Supervisor,- SalahEldin Abdalaziz Ajbani (Sudan University of Science and Technology, 2016-01-10)

This study intends to explore the use of planning and planning techniques in construction projects in Sudan. These projects are considered to have a strong effect on the Gross Domestic Product of the country, which is ...
INVESTIGATION AND IMPLEMENTATION IN ORTHOGONAL DIVISION MULTIPLE ACCES AND SINGLE CARRIER FREQUENCY DIVISION MULTIPLE ACCESS

Osman, Osman Mahmoud; Supervisor,- Ibrahim Khider (Sudan University of Science and Technology, 2015-12-10)

It is very challenging to design an efficient wireless communication system. It is becauseof many factors, affecting the performance of a typical wireless communication system. Orthogonal Division Multiple Access (OFDMA) ...
Short term hydrothermal scheduling for partial Sudanese national grid using particle swarm optimization

Eltaib, Galal Abd Elfatah Mohammed; Supervisor,- Mohammed Osman Hassan (Sudan University of Science and Technology, 2016-02-10)

Operation of a system having both hydro and thermal plants is more complicated than hydro plants which have negligible operating cost, but are required to operate under constraints of water available for hydro generation ...
Performance Evaluation Of Orthogonal Frequency Division Multiplexing System

Ali, Mohamed ElemamAbdAllah; Supervisor,- Ibrahim Khider (Sudan University of Science and Technology, 2015-12-10)

Orthogonal frequency division multiplexing (OFDM) is a special form of multi carrier transmission which has found its application in a number of wireless and wireline systems. In an OFDM scheme, a large number oforthogonal, ...
Feasibility of Using Air Lift Pump for Lifting Raw water from Turbine shaft Seal in Rosaries hydro-power Plant

Bashir, Ali Bashir Elzaki; Supervisor,- Ali Mohamed Hamdan Adam (Sudan University of Science and Technology, 2015-12-10)

The pressure effect on performance of airlift pump (ALP) was examined experimentally, to use in turbine pit of Rosaries power station. An airlift pump is a device that pumps a liquid or slurry using only gas injection. In ...
Comparison between Experimental and Numerical Structural Behaviour Results of Concrete Cube Models

Abdelrhman, Amir Tageldeen; Supervisor,- Abusamra Awad Attaelmanan (Sudan University of Science and Technology, 2015-11-10)

This research is aimed to compare between experimental and numerical values of axial deformation and compressive strength of 12 concrete cubes. The numerical concrete models were analyzed using computer software (UDEC) and ...
Automating Aircraft Painting Hanger By using PLC Conceptual Design

Alhassan, Khalid Omer Mohammed; Supervisor,- Elkhawad Ali Alfaki (Sudan University of Science and Technology, 2015-12-10)
Analysis of Digital Elevation Model for Monitoring Surface Water Drainage Streams Using Remote Sensing and Geographic Information System

OMER, ABDALLA ABDELGADIR SID AHMED; Supervisor,- ABDELRAHIM ELHAG ABDELAZIZ (Sudan University of Science and Technology, 2016-03-10)

In this research the hydrological analysis had been conducted using GIS (ArcGis) for monitoring surface water drainage networks. A part of Eltahadi express road Khartoum – Shandi sector had been chosen as an example. Digital ...
Flood Mapping and Risk Assessments by Using Geographic Information System and Remote Sensing

Saed, AmmarBrairMohammed; Supervisor,- AbdelRahimElhagAbdelaziz (Sudan University of Science and Technology, 2016-03-10)

Flood is one of the most destruction natural hazards which lead to the loss of lives, properties and resources. It has therefore become important to create easily read, rapidly accessible flood hazard map, which will ...
Application of Activity Based Costing (ABC) in Manufacturing Industry: A Case Study Manufacturing Furniture Factory

HASSAN, ABUELGASIM ALI; Supervisor,- Ahmed Elamin Haroun (Sudan University of Science and Technology, 2016-01-10)

The aim of this research is to find a way to develop a cost estimating method tailored to provide total production cost in small scale factory. The concepts and techniques presented in this research sustain this objective. ...

Recently added

Masters Dissertations : Engineering: Recent submissions

Search SUST

Browse

All of DSpace

This Collection

My Account