Masters Dissertations : Engineering: Recent submissions

  • Effects of Injector Parameters on Diesel Engine Performance and Exhaust Emissions by Using Simulation Software 
    Fadl Alseed, Khaled Abdalwhab Omer; Supervisor, -Abubaker Yousif Eltayeb Osman (Sudan University of Science and Technology, 2020-07-25)
    The phenomenon of global warming is one of the most important problems facing us at the present time, which has not been treated so far, and that the root cause of this phenomenon is the greenhouse gases surrounding the ...
  • أثر جودة مواد التشيد الخرسانية فى تحقيق اهداف المشروع الهندسى 
    سيد أحمد, سعاد كرم الله عوض; مشرف, -منـــــى أدم جمعــة رابــح (جامعـــــــــة السودان للعلوم والتكنولوجيا, 2018-02-11)
    تعتبر صناعة التشييد من أقدم الصناعات التي عرفها الإنسان، إن عملية ضبط الجودة من أهم العوامل التي تؤثر على كفاءة المنشآت عموما ولا تختصر عملية ضبط الجودة على عملية الإنشاء فقط ولكنها تبدأ قبل ذلك بمراحل كثيرة بداية من ...
  • اســـتراتيجية إعداد العقود الهندسية 
    مدثــر, نــدى تيســـير; مشرف, -منـــــى أدم جمعــة رابــح (جامعـــــــــة السودان للعلوم والتكنولوجيا, 2019-09-29)
    تناولت الدراسة استراتيجية إعداد العقود الهندسية بالتطبيق على عدد من المالكين والمقاولين والاستشاريين من شركات مختلفة. وهدفت الدراسة للتعرف على أنواع العقود الهندسية، والتعرف على كيفية إعداد عقود التشييد حسب نوع وطبيعة ...
  • أهمية الإدارة في المشاريع الإنشائية تحت تأثير بيئة ضاغطة 
    أحمد, مايسه يوسف الهميم محمد; مشرف, -صلاح الدين عبد العزيز عجبان (جامعـــــــــة السودان للعلوم والتكنولوجيا, 2018-08-22)
    تعد أهميه الإدارة في المشاريع الإنشائية التي تعمل في بيئة ضاغطة من أكثر الأدوار ديناميكية في أي مشروع ناجح حيث أن جميع المشاريع بحاجة إلي مديرين وقادة مسئولين عن التوجيه وإدارة الأنشطة اليومية من اجل ضمان نجاح المشروع ...
  • Power Electronics Converters for Wind Turbine - An Analytical study 
    Alhassan, Sara Mohammed Osman Abdalrhman; Supervisor, -Othman Hassan Abdalla (Sudan University of Science and Technology, 2019-12-07)
    The steady growth of installed wind has pushed the research and development of power converters towards full scale power conversion, lowered cost per kW, and increased power density and the need for higher reliability. Converters ...
  • تشييد الطرق بنظام عقود البناء والتشغيل وتحويل الملكية 
    أحمد, كاميليا عبد الله حسن; مشرف, -إبراهيم محمد أحمد إبراهيم (جامعـــــــــة السودان للعلوم والتكنولوجيا, 2017-08-31)
    تمثل مشروعات البنية التاحتية دعامة اساسية لدفع عمليات التنمية فى اى دولة وبخاصة الدول النامية منها ، غير ان ضخامة التمويل الذى تطلبة كثيرا مايشكل عبئا مالياكبيرا على ميزانيات الدول ، لذا وجب البحث عن مصادر وطرق بديلة لتمويل ...
  • Comparative Study of Seismic Behavior of Multi-Storey Framed Composite Steel and Reinforced Concrete Buildings 
    Hassan, IbtihalEldaw Osman; Supervisor, - Alia Osman Mohamed (Sudan University of Science and Technology, 2019-11-10)
    In this study a comparative analysis of seismic behavior of Multi-storey Composite and Conventional RCC Frame Structures at various heights has been carried out. Two models of ten storey high rise framed building structures ...
  • Application of Exergy Analysis on the Dairy Industry 
    Abdelsalam, Hager Mohamed Eltohami; Supervisor, - Abdallah Mokhtar Mohammed Abdallah (Sudan University of Science and Technology, 2019-12-10)
    The dairy industry ranks fifth among the most energy-intensive industries after oil, chemical, pulp and paper mill, and iron and steel making industries. The majority of energy demand in the dairy processing sector is still ...
  • Choice of the Best Path of High Tension Power Line Using Geographic Information Systems 
    Ahmed, Omnaeim Eltayeb Karamalla; Supervisor, - Abderahim Elhag Abdelaziz (Sudan University of Science and Technology, 2020-01-10)
    Electricity is a name that includes a variety of phenomena resulting from the existence of an electrical charge and its flow. Electricity transmission or electricity distribution network intended for the transfer of ...
  • Assessment of medical engineering workshops in Khartoum state’s hospitals 
    shareef, Safaa Ad daw Nassr Ad deen Ash; Supervisor, - Fragoon Mohamed Ahmed (Sudan University of Science and Technology, 2019-05-10)
    To get the most out of medical equipment we need to actively manage them, ensuring that they are used efficiently and optimally, and this will lead to improvements in the quality and quantity of healthcare delivered, without ...
  • AUTOMATION OF GRAIN DRYER SYSTEM BY USING PLC 
    Eisa, Walaa Abdalla Alfadil; Supervisor, - Awadalla Taifour Ali Ismaeel (Sudan University of Science and Technology, 2019-11-10)
    In this thesis, researcher highlighted the grain dryer control systems using Programmable Logic Controllers (PLCs), which increased their efficiency and easy of handling. It also raised safety and security standards. Which ...
  • Behavior of Reinforced Concrete Deep Beam with High Strength Reinforcement using SAP2000 Software 
    Ebaid, Sarah Hashim; Supervisor, - Abusamra Awad Attaelmanan (Sudan University of Science and Technology, 2019-12-10)
    The use of Finite Element Methods in the analysis of deep beams has become a very useful tool in modern times due to the emergence of powerful computers. The use of Finite Element Analysis is extremely fast and economical ...
  • Retrofitting Conventional Lathe to CNC Machine 
    SRALKHTM, HUSSAM AHMED ABDULLAH; Supervisor, - GAFER ABD ALHAMID MOHAMMAD (Sudan University of Science and Technology, 2020-01-20)
    The development of modern technologies in computer software and hardware as well as the integration of these technologies into industrial lines has proven that more accurate; speed and efficient products can be formed. ...
  • Design of Referral University Hospital 
    Abdallah, Ahmed Omer Ahmed; Supervisor, - Elias Sidieg Mohammed Hassan (Sudan University of Science and Technology, 2018-01-10)
    Sudan University of Science and Technology is established a medical campus which contains medicine, dentistry and pharmacy colleges. Internationally like this medical campus always attached with university hospital which ...
  • Designing an Air Pollution Monitoring System in Cement Plants 
    SulimanIssa, Noha Abdullah; Supervisor, - Abdullah Salih Ali (Sudan University of Science and Technology, 2018-03-10)
    Air pollution is one of the major cause of cancer diseases, Crisis diseases and Pneumonia. One of the main reason of the pollution is the cement industry which is widespread according to the increased requirement in the ...
  • An Arduino Based Short Range RADAR System 
    Abd Elrahman, Mohammed Elmustafa Ahmed Abd Elkarim; Supervisor, - Ebtihal H. G. Yousif (Sudan University of Science and Technology, 2019-11-10)
    The applications of the radio detection and ranging (RADAR) systems in military installations as well as scientific and commercial facilities is powered by the ability of the RADAR systems to use electromagnetic waves ...
  • Numerical Analysis and Design of Bored Concrete Pile Foundations 
    ELamin, Hunyda Khaled Mustafa; Supervisor, - Allia Mohammed Osman (Sudan University of Science and Technology, 2020-01-10)
    Bored concrete piles are mostly used in Sudan Khartoum area for tall building, bridges and other heavily structures where the soil under which is very weak. The purpose of this study is to analyze and design bored piles ...
  • Comparative Study of Vapor-Photovoltaic and Vapor-Collector Hybrid Solar Driven Air-Conditioning System 
    Mohammed, MuhyElden Hamid Soliman; Supervisor, - Abdlla Mukhutar Mohammed (Sudan University of Science and Technology, 2018-02-10)
    Research on using renewable energy in cooling purpose is one of the most important issues all over the world especially solar energy. Recent years the usage of air conditioning and refrigeration systems based on vapor ...
  • Impact of Project Scope Change on the Success of Building Projects in Khartoum State 
    Alsunni, Faiz Mohtadi Amin; Supervisor, - Salma Yahia Mohamed Mahmoud (Sudan University of Science and Technology, 2019-12-10)
    Projects need to be performed and delivered under certain constraints. Traditionally, these constraints are scope, time and cost. The Scope Control process influences at the factors that lead to project scope changes and ...
  • Evaluation of Cost and Time Control using Earned Value in Building Projects in Khartoum State 
    Farah, Asmaa Mohammed Ahmed; Supervisor, - Eltahir Abu Elgassim Mohammed (Sudan University of Science and Technology, 2020-01-10)
    In the period between 2016-2019 and the problem of searching for roads lies in the cost and time of projects in the construction experience in Sudan from exceeding the time specified in the contract between the owner and ...

Share

Search SUST


Browse

My Account