College of Engineering: Recent submissions

  • Using ant colony optimization algorithm for direct current motor speed controller 
    Awad, Suha Salah Eldin; Supervisor, -Alaa Eldeen Awooda (Sudan University of Science and Technology, 2018-11-22)
    The development of high performance motor drives is very important in all industrial fields and shows the importance of development in high-precision industries that respond to the rapid response to the organization of ...
  • Evaluation of Relay Technology in LTE-Advanced 
    Hamdon, Mosab Ali Mustafa; Supervisor, -Ebrahim Elkhedier (Sudan University of Science and Technology, 2019-03-26)
    The Third Generation Partnership Program’s Long-Term Evolution Advanced (3GPP LTE-Advanced) group is developing a new standard for mobile broadband access that will meet the throughput and coverage requirements of a ...
  • DC Motor Speed Control Using Fuzzy Logic and Proportional-Integral-Derivative Controller 
    Babiker, Alfatih Yassin Awad; Supervisor, -Mohammed Alnour Abdalla (Sudan University of Science and Technology, 2019-05-25)
    DC Motors are widely used in industries for various purposes. Many situations demand changes in the speed of the DC Motor, and this makes necessity to develop a method to effectively control the speed of DC motor. There ...
  • Development and Design of Safety Management Form in Construction Projects in Khartoum State 
    Al-Seed, Mariam Mustafa MukhtarFadl; Supervisor, -Osama Mohammed Ahmed (Sudan University of Science and Technology, 2019-05-04)
    Construction sites are generally complex and sometimes unsafe. They are complexbecause of extensive use of sophisticated plants, equipment, modern methods ofconstruction, multidisciplinary and multitasked aspects of its ...
  • Designing An Automatic Irrigation System Of Plants 
    M.nour, Awad Osman; Supervisor, -Mohammed Elnour Abdullah (Sudan University of Science and Technology, 2019-02-20)
    Irrigations of plants is usually time-consuming activity to be done in a reasonable of time, it require a large amount of human resources therefore loss of time and high cost. Herein we introduce automatic plant watering ...
  • Evaluation of the Impact Rains and Floods on Drainage System of Asphalt Pavement of Roads Case Study of Upper Atbara and Setit Dam Complex Project 
    Hashim, Nazar Awad El Kareem; Supervisor, - Osama Mohamed Ahamed Adam (Sudan University of Science and Technology, 2018-08-10)
    The objective of this study was to investigate the Evaluation the impact of rain and storm to asphalt pavement drainage system on the asphalt pavement of road segment in Upper Atbara and Setit Dam Complex Township. In ...
  • Mammogram images enhancement using adaptive morphological bilateral filter 
    Ahmed, Roa Ibrahim Suliman; Supervisor, -Zeinab Adam Mustafa (Sudan University of Science and Technology, 2017-12-12)
    The noise, poor image contrast, in homogeneity, weak boundaries and special mark existing in the mammogram images makes diagnosis procedure extremely difficult, so there are needs for a way to denoise the mammogram images ...
  • Building Information Modeling: Developing the 4D model in AEC industry in Sudan 
    Ahmed, Mustafa Abd Almahmoud Mustasfa; Supervisor, -Salma Yahyia Mohamed (Sudan University of Science and Technology, 2018-08-07)
    The fourth dimension model is a good tool that allows better visibility of the construction work during the planning stage, better communication among project team and more efficient planning. Additionally, 4D modeling ...
  • Structural and Hydraulic Design of Water Harvesting Structures In Agadi Water Station - Blue Nile state 
    Khater, Sara Mohammed Abker; Supervisor, -Osama Mohamed Ahmed (Sudan University of Science and Technology, 2018-09-18)
    Water harvesting is ideal for access to water when other water sources are not available, especially in dry areas where there is no permanent water available this study deals with the construction and design of a water ...
  • Performance Evaluation of Interference Management in Long Term Evolution-Advanced Networks using Almost Blank Subframes 
    Nasir, Hamdi Alaeldien Mirgany; Supervisor, -Fath Elrahman Ismael Khalifa (Sudan University of Science and Technology, 2018-11-22)
    tract Long-Term Evolution (LTE) allows operators to use new and wider spectrum and complements 3G networks with higher data rates, lower latency and a flat, IP based architecture to deal with sudden increase in demand for ...
  • INVESTIGATION OF SOFTWARE DEFINED NETWORK FOR VIRTUAL PRIVATE NETWORKS 
    Awad Alkareem, Asmaa Mubarak Altayeb; Supervisor, - Ibrahim khider (Sudan University of Science and Technology, 2019-01-10)
    The traditional networks face so many problems including: time-consuming, Multi-vendor environments require a high level of expertise and complicate network segmentation, inconvenience and difficulty of learning to manage ...
  • Design and Simulation of CubeSat Transceiver 
    Abdulmajed, Mussab Abdulrahim Hassan; Supervisor, - Moutaman Mirghani Daffalla (Sudan University of Science and Technology, 2019-02-10)
    This thesis conducting to have a discussion about communication subsystem of Cube Satellites, considering ISRASAT1 prototype as a focal of point with detailed description of CubeSat subsystems, transceiver components ...
  • Analysis of Magnetic Torsional Vibration Damper for Reciprocating Internal Combustion Engines 
    Abushousha, Sabir Abushousha Ahmed; Supervisor, - TagElsir Hussan Hussan (Sudan University of Science and Technology, 2019-04-10)
    Torsional vibration in Internal Combustion Engines is an important phenomenon occurs due to excitation loads, cycle-to-cycle variations results from the force the burnt gases and to change in inerita forces generated by ...
  • PERFORMANCE ANALYSIS OF CROSS LAYER DESIGN ROUTING APPROACH BASED ON IEEE 802.11p IN VEHICULAR AD-HOC NETWORKS (VANETS), KHARTOUM SCENARIO 
    Ahmed, Mayada Abdelgadir Mohamed; Supervisor, - Rashid Abdelhaleem Saeed (Sudan University of Science and Technology, 2019-03-10)
    In recent years, Vehicular Ad-hoc Networks (VANETs) have become an important part of Intelligent Transport Systems (ITS). The presence of such these networks opens the way for a wide range of applications such as safety ...
  • Design and Manufacturing of a Hydro Ejector 
    Mahmoud, Abbas Abdalguom; Supervisor, - Tawfig Ahmed Gamal-Eldin (Sudan University of Science and Technology, 2019-03-10)
    This Thesis offer a solution by using a hydro ejector to draw leakage water from the turbine head cover (sump tank), which in case of dewatering/ leakage water pumps failure -due to any malfunction- the leak water increasing ...
  • Interference management in optical attocells networks by using fractional frequency reuse 
    Mohammed, Mohammed Jamal Musa; Supervisor, - Ibrahim Khider Eltahir (Sudan University of Science and Technology, 2019-03-10)
    Light fidelity (Li-Fi) is new technology using lights (LEDs) as transceiver to send and receive data. However, when Light fidelity access points (attocells) placing near to each other in the network, they interfere each ...
  • PID Controller tuning optimization for Computer Numerical Control using particle Swarm Optimization algorithm 
    Doka, Tagwa Mukhtar Mohammed; Supervisor, - Alaaeldin Awoda (Sudan University of Science and Technology, 2018-12-10)
    In this thesis, an artificial intelligence method Particle Swarm Optimization (PSO) algorithm is presented for determining the optimal proportional-integral-derivative (PID) controller parameters of a servo motion system ...
  • Design of Prosthetic Foot Using Computer Aided Design 
    Ibrahim, Yousra Yagoub Elmadni; Supervisor, -Megdi Elnour Abdelrahman (Sudan University of Science and Technology, 2018-12-20)
    Transtibial prosthetics in Sudan need to have attention, according to the National Authority for Prosthetics and Orthotics (NAPO) statistics transtibial amputees represents the biggest number between the other levels of ...
  • Effect of Delay Period on Performance of Compression Engine Running on Jatropha Fuel 
    Dawood, Sulaiman Muhammed; Supervisor, -Tag-Elssir Hassan Hussan Ali (Sudan University of Science and Technology, 2019-03-10)
    Jatropha Biodiesel was tested in a single cylinder direct-injection, water cooled diesel engine to investigate the operational parameters of a small capacity diesel engine under five engine loads, constant speed test. ...
  • Balance between hard and soft managerial skills in construction projects management in Sudan 
    Ahmed, Hameeda Tag Alsser Abdein; Supervisor, -Awad Saad Hassan (Sudan University of Science and Technology, 2019-04-17)
    Despite the importance of management skills hard and soft, but not all of the members of engineering community aware of their importance, role and impact on the performance of projects and job satisfaction . Hard skills ...

Share

Search SUST


Browse

My Account