College of Engineering: Recent submissions

  • STUDY THE EFFECT OF THE SPOTS DISTRIPUTION IN SPOT WELDING 
    Mastor, Abdalla Gebreel Abdalla; Supervisor, -Yaseen Mohamed Hamdan (Sudan University of Science and Technology, 2018-03-04)
    This research presented a study of tensile strength and toughness method of welding joints in spot welding of 0.5 mm thicknesses low carbon steel sheets (Grade 1.8969 S600MC). six specimens welding joints were subjected ...
  • Efficiency Evaluation of MODIS Data Products In Monitoring and Mapping The Wild land Fire 
    Hsbalkhalig, Dalia Omer Saeed; Supervisor, -Mohamed Elamin Ahmed Babiker (Sudan University of Science and Technology, 2019-04-28)
    El Dinder National Park (DNP) is one of the oldest parks in Africa. It was established in 1935. DNP is included in the UNSCO list of biosphere reserves since 1987. Fire in DNP starting in early as mid-September. During ...
  • Developing a Real Time Algorithm for Diagnosing Glaucoma 
    Ahmed, Arwa Ahmed Gasm Elseid; Supervisor, -Alnazier Ahmed Osman Hamza; Co-Supervisor, -Ahmed Fragoon (Sudan University of Science and Technology, 2018-08-13)
    A Glaucoma is a group of eye diseases causing optic nerve damage, as it has no symptoms and if not detected at an early stage it may cause permanent blindness. Glaucoma progression precedes some structural damage to the ...
  • A Safety System For Automatic Accident Detection And Injured Rescue 
    Dawood, Amna Ahmed Ibrahim; Supervisor, -Akram Ismail Mohamed Omara (Sudan University of Science and Technology, 2018-08-15)
    With the large increase for vehicles and cars of various kinds and the movement of large development that occur every day on the roads and streets it was natural and realistic to increase traffic accidents by multiple ...
  • Design of an Efficient Cyclic Redundancy Check-32 using Field Programmable Gate Array 
    Abdulanbi, Mohamed Salah Eldin; Supervisor, -Hisham Ahmed (Sudan University of Science and Technology, 2018-11-29)
    The streaming of data over the networks is increasing day by day. the current applications, video web sites, Internet of things and Machine to Machine made new era of the data over the internet.Accordingly, the networking ...
  • Implementation of Digital FM Receiver using FPGA 
    Makkawi, Mohammad Al-Husien Mohammad Ahmed; Supervisor, -Rashid A. Saeed (Sudan University of Science and Technology, 2018-06-28)
    The complexity of hardware in traditional FM radio lead to bigger radio size, noisy, difficulties in maintenance and higher production costs. In addition to limitation on protocols and frequency bands supported, which lead ...
  • Brain Tumor Detection And Classification From Mr Images Using Artificial Neural Net Works 
    GessmAllah, Kawther Mohammed Tom; Supervisor, -Alnazier Osman Hamza; Co-Supervisor, -Zeinab Adam Mustafa (Sudan University of Science and Technology, 2018-08-15)
    Brain tumor is the major cause of cancer deaths in human which is due to uncontrollable cells growth in brain portion. It is evident that the chances of survival can be increased if the tumor is detected and classified ...
  • A Study of Problems and Solutions of Traffic Congestion in Khartoum City Using Geographical Information Systems 
    Mohammed, Abubaker Osman Abdalla; Supervisor, - Khalafalla Mohammed Badi (Sudan University of Science and Technology, 2019-01-10)
    Traffic congestion is a challenge for developed and non-developed countries. Khartoum city is one of the world's cities facing traffic congestion problems. The citizens of this city suffer from the queues of cars that fill ...
  • Control Pick and Place Robotic Arm by using Voice Recognition 
    Hakim, Ahmed Hakim Mirghani; Supervisor, - Abd Alla Salih Ali Mahmoud (Sudan University of Science and Technology, 2018-11-10)
    Voice Controlled Robot (VCR) is a mobile robot. The robot’s action can be controlled by the user by giving a specific person’s voice commands. The robot will receive the voice commands from the person through the microphone ...
  • ECG Signal Analysis for Biometric Recognition 
    Elamin, Arwa Alaaldin Mursi; Supervisor, - Mohammed Yagoub Esmail (Sudan University of Science and Technology, 2016-09-10)
    This thesis studies the applicability of the electrocardiogram signal (ECG) as a biometric. The ECG, a record of electrical currents generated by the beating heart, is potentially a distinctive human characteristic, since ...
  • Performance Evaluation of Optical Fiber Current Transformer 
    Ahmed, Sulieman Eldoud Bashir; Supervisor, - Yousif Hassan Abdelrahim (Sudan University of Science and Technology, 2019-02-10)
    The requirement for reliability and security in power system is increasing every day with the increase in complexity of the power system networks. In order to ensure highest level of reliability and protection, relays have ...
  • Control System Design for Utilizing Natural Gas in Diesel Engines Using Microcontroller 
    Taha, Emad Ahmed Abdulrahim; Supervisor, - Ala-Eldin Abd allah Awouda (Sudan University of Science and Technology, 2018-11-01)
    With the increasing concern regarding diesel engine emissions, including Nitrogen Oxides (NOX) and Particulate Matter (PM), and the rising of energy demand as well, the utilization of alternative fuels in diesel engine ...
  • Design of Digital Fault Recorder Using Microcontroller for Electrical Distribution Company Network 
    Alameen, Khogali Abdulkareem Khogali; Supervisor, - Mudathir Abdallah Osman Fagiri (Sudan University of Science and Technology, 2018-12-01)
    It is obvious that our modern life has become very dependent on the constant availability of electricity. Therefore, the efficiency of electrical energy is of the utmost importance in our lives and this increase in the ...
  • Modeling and Evaluation of LoRa and Sigfox Low Power Wide Area Networks for Internet of Things 
    Elamin, Esra Bashir Abbas; Supervisor, - Niemah Izzeldin Mohamed Osman (Sudan University of Science and Technology, 2019-11-10)
    During this decade, there is a huge expansion in the number of low-power Internet connected devices. The Low Power Wide Area Network (LPWAN); because of its low-cost communication ability and long-range, is considered as ...
  • Partial research for a master's degree in mechanical engineering Effect of Injector Nozzle Holes on Diesel Engine Four Stroke Performance 
    Abdelgaliel, Abubaker Faisal Musa; Supervisor, -Abubker Yousif Eltayeb (Sudan University of Science and Technology, 2019-03-21)
    Diesel engine model simulation designed for four-stroke direct-injection diesel engine requires the use of advanced analysis to carry out of the direct-injection diesel engine model performance effect focuses on fuel ...
  • Design of a hybrid artificial hip joint using finite element analysis 
    Mohemed, Ryan Kamal SaiedAhemed; Supervisor, -Elias Sidieg Mohammed Hassan (Sudan University of Science and Technology, 2019-03-31)
    Rehabilitation is an important branch of biomedical engineering specializations that is exceedingly related to the healthcare delivery and its improvement, one of the most important topics of rehabilitation is prosthesis that ...
  • Design and Implementation of Building Management System using Internet of Things 
    Ahmed, Rehab Jaffer Nimmer; Supervisor, - Fath Elrahman Ismael Khalifa (Sudan University of Science and Technology, 2019-01-07)
    This research presents a building management system (BMS), which is the key module in order to perform the controlling and automation. The main area of this BMS focuses on switching and controlling of the power input/output, ...
  • Developing an Algorithm to GenerateLinear Movement in CNC Machines 
    Mohammed, Ayman Omer Adam; Supervisor, -Hassan Osman (Sudan University of Science and Technology, 2018-12-13)
    This study was carried out to find technique to minimize the accumulated error during linear and inclined movement (G00, G01) and in circular movement or motion in curve (G02, G03) on X, Y axes in CNC machines. The error ...
  • Improve 3axis CNC Router by Adding New Axis 
    Hamid, Zoelnoon Nasraldeen; Supervisor, -Hassan Osman (Sudan University of Science and Technology, 2018-08-14)
    Increase in the rapid growth of Technology significantly increased the usage and utilization of CNC systems in industries but at considerable expensive. The idea on Improve 3axis CNC router by add new axis came forward ...
  • Implementation of Denoising MEMS Accelerometer Using Wavelet Transformation 
    Yousif, Mohammed Abd Elmonim Mohammed; Supervisor, - Omer Abdel Razag Sharif Abubaker (Sudan University of Science and Technology, 2019-03-10)
    The MEMS accelerometer is an important sensor to measure the object’s motion state (acceleration), and it is a key device in inertial systems such as, vibration measurement and navigation systems. MEMS accelerometer has ...

Share

Search SUST


Browse

My Account