College of Engineering: Recent submissions

  • DESIGN OF A SEQUENTIAL CONTROL SYSTEM FOR INDUSTRIAL AUTOMATION 
    AHMED, MORTADA EL AMIN ABDELLA; Supervisor - ABD AL RASOOL JABAR ALZEBIDY (Sudan University of Science and Technology, 2006-06-01)
    Sequential systems are commonly found in industrial automation. This type of systems can be represented by discrete state space where changes in state are caused by occurrences of events. Sequential system can be categorized ...
  • Proportions of an axial Wind Turbine to be used in North of Sudan 
    ALfaki, Badri Mohamed; Supervisor - William Ibrahim Asaad (Sudan University of Science and Technology, 2006-01-01)
    This study has been carried out to exploit the wind energy to lift water from deep well for domestic use in the north of Sudan where the wind is available. The result of this study gave the estimation of proportions of ...
  • Modification and implementation of Data Encryption Standard 
    Ahmed, Galal Abdelhaleim; Supervisor - Osman Mohammed Daffalla (Sudan University of Science and Technology, 2006-01-01)
    This thesis describes some aspects of cryptography i.e. encryption and decryption of a plaintext to a ciphertext using some key that must be kept secret by some means of protection , the thesis is intended to study the ...
  • Furnace Fuel as an Alternative Fuel for Boiler 
    Eltati, Mohamed Elzuber Ahmed (Sudan University of Science and Technology, 2006-11-01)
    One of power plant requirement is the availability and cost of fuel to be used. Sudanese heavy fuel oil (furnace) satisfies these requirements. There are problems in handling and using furnace fuel oil directly in combustion. ...
  • Introcution Motor Speed Control by Using Metal Oxide Semiconductor Feiled Effect Transitor 
    IBRAHIM, KALTHOM ADAM HASSAN; Supervisor - A.ABD ALLA SALIH ALI (Sudan University of Science and Technology, 2007-01-01)
    The electrical motors are very important machine in our live, and they are widely used in the different fields . The alternating current (a.c.) motors and the direct current (d.c.) motors are represent the two main type ...
  • Developing a GIS-based Hydrological Model : With special reference to Darfur region 
    Abdel-Magid, Hisham Isam Mohammed; Supervisor - Abdalla Mohammed Abdle Magid (Sudan University of Science and Technology, 2007-04-01)
    This research work concentrated on using Geographic Information Systems (GIS) techniques to produce digital-hydrological maps and to formulate a useful tool for rainfall-runoff estimation. Produced maps were based on ...
  • Three Dimension (3D) Image Reconstruction for Computerized Tomography 
    Warraq, Shima Suliman; Supervisor - Alnazier Osman Moh. Hamza (Sudan University of Science and Technology, 2012-10-01)
    Most of CT machines do not produce 3D images that can be viewed and rotated by medical doctors. Medical students also face difficulties in getting X-ray images from hospitals due to ethical issues and privacy policy of ...
  • Computer-Aided Color matching 
    ISMIL, LANA OMER ELFAROUG; Supervisor - Ahmed ibrahim (Sudan University of Science and Technology, 2009-02-01)
    The purpose of this research to study the available theories and applied technique for the color matching, to design and propose system (software) that enable to carry simple color matching function, MATLAB the language ...
  • Destructive and Non- Destructive Testing for Concrete in Sudan -A Comparative Study 
    Elbashier, Adil Mohamed; Supervisor - SALIH ELHADI MOHAMED AHMED (Sudan University of Science and Technology, 2013-03-01)
    To make comparison between destructive and non-destructive tests Two grades of concrete were considered, grade 25 and grade 30 N/mm² . For each grade 24 cubes and three beams were casted and tested. Two destructive tests ...
  • Home monitoring based on GSM modems 
    Saadabi, Dalia Mirghani Mahmoud; Supervisor - Abdelrasol Jbbar Alzubaidi (Sudan University of Science and Technology, 2013-06-01)
    Control system and home monitoring remotely has become one of the most intelligent systems that are competing companies to provide all that is new in this area in terms of connecting and linking devices needed by the modern ...
  • Model Reference Linear Adaptive Control of DC Motor Using Fuzzy Controller 
    Yahya, Magdoleen Mustafa Almubark; Supervisor,- Awadalla Taifour Ali (Sudan University of Science and Technology, 2013-07-01)
    This thesis presents comparison of conventional model reference adaptive control (MRAC) using PID with model reference adaptive control scheme using fuzzy linear adaptation(MRFAC). Model Reference Adaptive control (MRAC) ...
  • Wireless Model for Monitoring and Controlling Water Networks and Stations using GSM 
    Mohammed, Mohammed Abdalla Hassan; Supervisor - Ibrahim Khider Eltahir (Sudan University of Science and Technology, 2013-09-01)
    In recent years, there has been an increasing interest in the adoption sensing technologies for instrumentation within a variety of systems. This project is intended to serve as application of the use for wireless sensors ...
  • ies Linear and Nonlinear Finite Element Analysis of Large Deformation of Thin Shell Structures 
    Adam, FathElrahman Mohamed; Supervisor, elteyeb eirayali (Sudan University of Science & Technology, 2008-02-10)
    This thesis presents the linear and nonlinear analysis of thin shell structures. The linear formulation is based on three finite elements namely the: four nodes degenerated shell element (DE4), the four nodes flat shell ...
  • DESIGN OF POWER BUDGET AND RISE TIME CALCULATOR FOR OPTICAL FIBER LINK 
    Shiekhedrees, Ibrahim Mohamed toum; Supervisor - Fakher Eldin Mohamed Suliman (Sudan University of Science and Technology, 2008-10-10)
    The power and rise time budgets are two important approaches in designing fiber optic links. The power budget approach must take into the consideration the power levels across the link. In the rise time approach, the system ...
  • Design of a Digital Encoding Circuit 
    Mohammed, Kamal Fouad Abbas; Supervisor - Abd ALrasol Jabar ALzubaidy (Sudan University of Science &Technology, 2009-01-01)
    Recently, digital data transmission has witnessed considerable importance. This is a result of huge increase in applications where data, voice, video, and multimedia are digitally processed in baseband modulation, however, ...
  • دراسة خصائص حركة المرور والنقل في وسط مدينة الخرطوم وأثرها في الازدحام المروري 
    الياس, أسامة مصطفي; مشرف - سامي عبد الله عثمان (جامعة السودان للعلوم والتكنولوجيا, 2008-04-01)
    الغوص بين طيات النفوس فإننا نبحث عن الأفضل عن الأعمق فكراً والأكثر حرية .. والأرقي أفكارا فلنترك الفروع ونقصد الأصل بحور تتلاطم وأحزان تزدحم وفراق بعضه فوق بعض فلنبحث عن الأصيل فوق هذه الأكوام أسامة ،،، ...
  • Determination of Combustion Temperature and Thermodynamic Properties of Combustion Products for Internal Combustion Engines 
    Hassan, Ahmed Osman Beshir; Supervisor - AbdulHussain (Sudan University of Science and Technology, 2005-10-10)
    In combustion of molar balance data and energy balance data it is possible to determine the temperature of combustion products under any specified conditions, data from “The Chemkin Thermodynamic Data Base” were used to ...
  • PLC Based Automation for Industrial Operation 
    Berssi, Rania Mohammed Aid; Supervisor - Abdalrasol Jabar Kizar Alzubaaidi (Sudan University of Science &Technology, 2008-09-01)
    Automation or numerical control is the use of control system such as computers to control industrial machinery and processes, replacing human operators. In the scope of industrialization, it is a step beyond mechanization. ...
  • Effect of Maintenance Cost on Truck Performance & Reliability (CASE STUDY IN PETRO COST COMPANY) 
    Mohamed, Elmahdi Ahmed; Supervisor - Elkhawad Ali Elfaki (Sudan University of Science &Technology, 2008-05-01)
    This research was conducted in “Petorcost Company for Engineering” to show the effect of maintenance cost on truck performance and reliability. The study was carried out using information and data gathered from ...
  • Performance Evaluation and Comparative of Cooperative Relaying Protocols 
    Ahmed, Samah Taha; Supervisor - Ibrahim Khider Altahir (Sudan University of Science &Technology, 2013-01-01)
    With the rapid growth of multimedia services, future generations of cellular communications require higher data rates and more reliable transmission link with keeping satisfactory quality of service. Cooperative ...

Search SUST


Browse

My Account