Bachelor of Petroleum Engineering & Technology: Recent submissions

  • New correlation for prediction of bubble point pressure for Sudan crude oil 
    Mustafa, Hussam aldeen Mustafa Mohammed; Elgasim, Mohammed Abdelrahman Manofali; Idrees, Muhanad Abdu Khidir (Sudan University of Science & Technology, 2016-10-01)
    Knowledge of bubble point pressure is one of the important factors in the primary developments of an oilfield. Bubble point pressure is required for analysis of wells performance, reservoir simulation, and production ...
  • Hole Cleaning Modelling & Simulation In Horizontal Wells Case Study Heglig Field 
    Terab, Abdelnasir Ahmed Mohamed; Bashier, Mohemed Sedikh; Saleh, Mohmed Elgazaly; Bagadi, Mohmed Adam Omer (Sudan University of Science & Technology, 2016-11-01)
    Field experience shows that the accumulation of cutting in a wellbore causes several drilling problems. These include an increase in torque and drag, which may limit drilling from reaching to a desired target of Formation ...
  • DESIGN OF PRODUCED WATER SKIM TANK 
    Abubakar, Mohamed Alamin Ali; Sidahmed, Mohamed Sidahmed Ali; Elmahadi, Osman Moawia Osman (Sudan University of Science & Technology, 2016-10-01)
    Water produced during oil and gas extraction operations constitutes the industry’s most important waste stream on the basis of volume. Our project about design Produce water Skim tank which is treated Water from associated ...
  • SCAL data, computer program creation for sandstone reservoir relative permeability normalization 
    MOHMMED, ABDULRAHEEM ABDULBAGY ALI; ALSAWADI, AHMED MOHAMMED AHMED; ABDALLA, AHMED MUSTAFA MABROUK; ALAGHA, FERAS TAMEEM NIFE (Sudan University of Science & Technology, 2016-10-01)
    Special core analysis data (SCAL) is one of the important data which obtained by applying tests on samples which extracted from oil reservoirs to determine the reservoir formations properties such as (overburden pressure, ...
  • Improve Estimation for Fluid Contacts Using Excess Pressure 
    Jobara, Ahmed Altayeb Ahmed; Merghani, Almuntasir Bellah Khalid Alsheikh; Alhassan, Mohammed Merghani; Edrees, Moaz Emad Eldeen Mohammed; Ali, Shmo Alnoor Mahmoud (Sudan University of Science & Technology, 2016-11-01)
    Positions of initial fluid contacts and free water level (FWL) are critical for field reserve estimates and for field development. Typically, the position of fluid contacts are first determined within control wells and ...
  • Energy Losesses In Refineries case study elobied refinery 
    Allbab, Amira Ahmed; Yousif, Faris Mohammed; Osman, Mariam Mohammed Ibrahim; Mohammed, Mohammed AbdAlazeem Ali (Sudan University of Science & Technology, 2016-10-01)
    In this research data from Elobied refinery was used to calculate the energy losses for fixed roof tanks also this data was used to calculate losses for unisolated valves, flanges and pipes, In addition the efficiency for ...
  • Decline Curve Analysis for a Sudanese Oil Field 
    Barry, Mohammed Elfatih Osman; Omara, Mazin Ahmed Alawad; Hamoda, Emad Eldin Eltigani Ali (Sudan University of Science & Technology, 2016-11-01)
    The objective for the work described in this research a rose from a need to analyze production decline data where the flowing bottom hole pressure varies significantly. The variance of the bottom hole pressure with time ...
  • Mechanical stuck prevention caused by shale swelling using laboratory experiments 
    Gumaa, Abuhorira El Tahir; El-Hassan, Hassan Fath-Elrahman; El hassan, Rammah El asaad; El hadi, Mishaal Mairgani; Hamad, Hosam Alden Ahmed (Sudan University of Science & Technology, 2016-10-01)
    Pipe Sticking is one of the serious problems that the drillers experience during drilling process of oil and gas wells. Pipe sticking can be divided into two categories: the differential stuck and mechanical stuck (shale ...
  • MODELING AND DESIGN OF FLUIDIZED CATALYTIC CRACKING RISER 
    Abdalla, Alfadel Ali Saeed; Elnour, Hamza Mohammed; Sayed, Kamal El-din Fayez (Sudan University of Science & Technology, 2016-09-01)
    In the present research, Material and Energy balance, and modeling for the fluid catalytic cracking was developed to obtain conversion 92% by using Runge-kutta order implemented in MATLAB with suitable zeolite weight. And ...
  • Slim hole sidetrack from abandon well(Case Study a well in Hamra oil field, Block 2B) 
    Mahmoud, Abdelmonaim Babikir Abdelmonaim; Khairy, Dalia Mohamed Salih; Yagoub, Eman Yagoub Ali; Mokhtar, Faisal Mokhtar Saeed (Sudan University of Science & Technology, 2016-10-01)
    Recently, the most important challenge for Sudan oil industry, especially with the drop in oil prices, is how to reduce the drilling and completing costs. This project presents a solution to this problem by introducing the ...
  • Production Optimization Using Surface Network Modeling (Hamra Field Case Study) 
    Ali, Ahmed Mohamed; Mustafa, Abdelrahman; Abdalla, Hassan modaser; Mohammed, Mohammed Alsir (Sudan University of Science & Technology, 2016-10-01)
    This work aimed to accurately identify and solve production issues in Sudanese field using pipeline network modeling. Pipeline network plays important role in delivering the production from wellhead to Field Processing ...
  • Experimental Investigation Of Seismic Stimulation Recovery As Case Study In Heglig Area 
    Musaad, Abubaker Eltayeb; Alddo, Hesham Mohamed Saeed; Alamin, Khalid Abd Albagi; Babiker, Mohamed Mohamed Almutasim (Sudan University of Science & Technology, 2016-10-01)
    Previous theoretical and experimental works described the acoustic stimulation as a potential method for enhancement of oil recovery. Several mechanisms have been suggested to govern the process of additional oil recovery ...
  • Simulation of Delayed Coking Unit in KRC 
    Alfeel, Asmaa Mohamed Mahgoub; Mohamed, Algeily Altaj Ali; Lo-Lujo, Emmanuel Onesimo Yabang; Mahmoud, Lowi Azhari Mohamed (Sudan University of Science & Technology, 2016-10-01)
    Abstract: Crude oils around the world tends to be more dense in recent years and needs to be treated in a suitable way, one way is the use of thermal cracking processes. One of these processes is the delay cocking which ...
  • Integrated Interpretation of Remote Sensing and Satellite Gravity Data - Red Sea Sudan 
    Abdallah, Esam Eldeen; Abd Alrazig, Almeghdad; Elsayed, Ahmed Elzubeir; Elfatih, Ahmed Mohamed; Adil, Ahmed (Sudan University of Science & Technology, 2016-10-01)
    The study area lies in NE Sudan and is situated in the Red Sea State It is bounded by latitudes (20° 19' 35.1'' _ 21° 34' 20.5'' N) and longitudes (36° 53' 37.92'' _ 37° 12' 47'' E). It cover approximately 3539 sq. km, ...
  • Experimental Studyto Recognize the Effects of Salts (potassium and sodium chloride)Contamination on Rheological Properties of Water Base Mud Under Different Temperatures 
    Suliman, Soufian Abdul Motaal Mohammed; Ahmed, Hamid Alhadi Alnazir; Almahi, Almahi Mohammed; Babiker, Mohammed (Sudan University of Science & Technology, 2016-10-01)
    The drilling engineer must have a good estimate of how the stability of drilling fluid changes due to salt contamination encountered during drilling operation. a mud sample with different concentrations of sodium and ...
  • Water Flooding Analysis (Simber West Field Case Study) 
    Elmajoup, Mahir Abdallah; Elhassan, Musaab Ibrahim; Ahmed, Ahmed Fayad; Mohammed, Mulham Abdalla (Sudan University of Science & Technology, 2016-11-07)
    Simber west field was shut in due to low reservoir pressure in Q3 2009 represented rapid decline reservoir pressure and low water cut so suggested that minimum aquifer support to Ard-D reservoir To restore the oil production ...
  • Analytical application on Wellplan software studying torque and drag 
    Ahmed, Abubaker Alamen; Elsheikh, Ahmed Faisal; Omer, Emad Ibrahim; Ibrahim, Mustafa Ahmed (Sudan University of Science & Technology, 2016-11-01)
    One of the most critical limitations during horizontal drilling is torque and drag generated by the contacts between the drill string and the borehole or casing. Therefore, torque and drag analysis and calculations are ...
  • RECOVERY OF NATURAL GAS LIQUIDS AND PRODUCE LIQUIFIED PETROLEUM GAS FROM ASSOSIATED NATRAL GAS 
    mohammed, Ahmed Abdelrahman; mohammed, Mohamed Albager; Ahmed, Musab Mukhtar (Sudan University of Science & Technology, 2016-10-01)
    The major source of producing LPG in Sudan is from oil refining. The objective of this work is to Recover natural gas liquids and produce LPG from associated gas produced . The unit will consist of two parts: refrigeration ...
  • Applying Pinch Technology in the Heat Exchanger Network for an Existing Refinery 
    Abdulrahman, Abdulrahman Ahmed; Abdulrahman, Jafar Abdalmonem; Elamin, Hisham Abdin (Sudan University of Science & Technology, 2016-10-01)
    This project uses pinch analysis techniques to analyze the heat transfer characteristics and efficiency of a typical heat exchanger network, used in Elobied. The heat exchanger network, consist of eight heat exchanger with ...
  • Design Of Petroleum Products Pipeline From Haya Station To Algadaref Storage Facilities 
    Ahmed, Awad Hassan; Khalafalla, Mohammed Ibrahim; Mohammed, Omer Mahdi; Supervisor - SumiaAbdoalmoneim; Supervisor - SumiaAbdoalmoneim (Sudan University of Science and Technology, 2015-10-10)
    Three pipelines with different diameters were studied in this thesis to transport gasoline and gasoil products from Haya station –which lies on Al-bahar Al-ahmer state – to meet needs for Gadaref and Kassala states in ...

Share

Search SUST


Browse

My Account