SUST Repository

Bachelor of Petroleum Engineering & Technology

Bachelor of Petroleum Engineering & Technology

 

Recent Submissions

  • Elhassan, Ashraf Elzeain Shareef; Abd Elaleem, Mohammed Awad Elgeed; Albakri, Mohieldeen Mortada; Ali, Yusra Magzoub; Supervisor, -Ayah Abdelhai (Sudan University of Science and Technology, 2017-10-03)
    The control of wells is a cornerstone of drilling process, Through this study the detailed procedures of bleed and lubricate has been discussed; Calculated volumes of fluid that must be bled from the well during lubricating ...
  • El-tom, AbazerAwad; Elsharif, Mohamed Hamed; Adam, Mohamed Ismail; Bashir, Osama Mohamed; Supervisor, -HushamAwadelssied Ali (Sudan University of Science and Technology, 2017-10-10)
    Chemical method considers as one of EOR method that is used to increase oil recovery and decreases water production through a life of reservoir, biochemical me-thod is one of this method which depended on enzyme. Hamra ...
  • Idress, Abdulaziz Mohammed Hajsaeed; Abdelgadir, BadrEldin Abdelgadir Ali; Taha, Osama Mohammed Ahmed; Mudawi, WalaEldin Hamdan Mohammed; Supervisor, -Eltayeb Adam Mohammed (Sudan University of Science and Technology, 2017-10-07)
    In this research, a comprehensive and integrated petrophysical analysis of a single and multi-oil wells has been interpreted using an available core data and wireline logging data with a view to characterizing the reservoir ...
  • Mohammed, Ahmed abdalazeem; Khalifah, Basil yousif; Alamin, Fatima omere; hasan, Mahmoud adam; Khalid, Masiya bdelmoniem; Supervisor, -Nihadomerhasssan (Sudan University of Science and Technology, 2017-10-04)
    Furnaces and fired heaters provide the energy associated with running hydrocarbon processes and chemical plants. In this project the suitable and best way to gain high efficiency of the furnace has been determined by ...
  • Mohamed, El-Mustafa Mohamed Hamad; Ahmad, Mohammed Ahmad Hassan Mohammed; Taha, Asia Osman Ali; Al-Hassan, Mohamed Mahdi Al-Abd; Supervisor, -Satti Merghani (Sudan University of Science and Technology, 2017-10-07)
    One of the most important problem in petroleum industry is to know the pressure distribution in the reservoir with realistic and applicable method, this study gives a pressure description with respect to time and distance. A ...
  • Al- Qaisi, Othman Abdullah Ahmed; Salih, Abdelmula Adam; Al – Roum, Adam Hassan Mahmoud; Al - Shekh, Mohammed Mahmoud Mohammed; Supervisor, -Alradi Abbas (Sudan University of Science and Technology, 2017-10-03)
    The study of the physical properties of reservoir rocks and knowledge related accounts of great importance , As it relates to understanding the behavior of the fluid now inside the circles with respect to porosity' and ...
  • Abdelgadir, Alaa Abdulanasir; Hassan, Eiman Kamal; Mohammed, Mohammed Abdallah; Omer, Omer Mohammed; Ahmed, Tarig Mamoun; Supervisor, -Mohanned Mahjoup Mohammed (Sudan University of Science and Technology, 2017-10-07)
    Piping systems are the most important transmission method in oil industry that help distribution of the natural resources over different regions. This thesis was prepared in order to give detailed characterization of ...
  • Nasereldeen, Ahmed; Ahmed, Ahmed Galaleldeen; Mohammed, Mohammed Osman; Ahmed, Abdelrahim Mahmoud; Supervisor, -Mohanned Mahjob Khairy (Sudan University of Science and Technology, 2017-10-04)
    Most of the Sudanese fields face the challenges of maintaining production rates, which are decreasing at a large rate annually. This project aims to find a solution that helps to improve the production rates in Fula Field ...
  • Salih, Ahmed Mohammad; Modather, Ali Essam; Bakhiet, Amna Daffallah; Eshag, Eathar Abbas; Supervisor, -Husham Awadelssed Ali (Sudan University of Science and Technology, 2017-10-04)
    Thermal methods are the most commonly used Enhanced Oil Recovery methods around the world, one of them is the cyclic steam stimulation process, which had been implemented in FNE field; the well HHH-61 and HHH-38. After the ...
  • Muhammed, El-Seddeg Nour El-Den; Mursi, Muhammed Hamdi; Elsadeq, Mohamed Zaroog; Abdullah, Wafaa Muhammed; Supervisor, -Elham Mohammed Mohammed Khair (Sudan University of Science and Technology, 2017-10-10)
    Sand production is a growing concern in petroleum industry due to its severe problems and the associated technical and operational challenges. In Sudan, due to the relatively high viscose fluids, and the poor consolidated ...
  • Mahmoud, Ahmed Mohamed; Ahmed, Hossam Hassan; Hamad, Mohaned JamalEldin Mohamed; Supervisor, -Yousif Eltahir Bagadi (Sudan University of Science and Technology, 2017-10-04)
    Thread connections are widely used in oil and gas industry. Determination of under which this thread may leak is very crucial for drilling operation continuity. In this thesis finite element software (ABAQUS) has ...
  • ABD ALRAHMAN, ABD ALRAHMAN HASSAN; TAYFOR, AHMED HASHIM; ABD ALRAHMAN, AMRO ABU ALGASIM; MOHAMMED, HUSSAM ALI IBRAHIM; ALI, MOHAMMED AL GASIM MOHAMMED; Supervisor, - AHMED EL NOOR (Sudan University of Science and Technology, 2017-10-08)
    Formation evaluation can be performed in several stages such as during drilling, after logging as detailed log interpretation, and core analysis in the laboratory, etc. This study shows the formation evaluation using ...
  • Mohamed, AlaminAltayeb; Mohamed, AdbelrahimSuliman; Elhiraika, Elhiraika Khatim; Adam, EsmaeilElshafie; Supervisor, -HushamAwadelssied Ali (Sudan University of Science and Technology, 2017-10-08)
    This study for Moga oil field which Located in the eastern part of block 6, in Muglad basin located in south west of Sudan. According to the field under study Moga Sudanese oil field which characterizedwith low recovery ...
  • Mohammed, Ahmed Mohammed Osman; Awadalla, Abdulhafeez Ahmed Abdulhafeez; Sharef, Mazin Salah Abdallateef; Abdalla, Abobaker Mohammed Musa; Alshreef, Omer AbdulazizDafallah; Supervisor, -Mohammed Edris Osman (Sudan University of Science and Technology, 2017-10-04)
    This project study the implantation of alkylation unit in order to increase amount of gasoline produced in Khartoum refinery using LPG produced from RFCC as a feed. In this thesis simulation of unit has been done using ...
  • Ibrahim, Mohammed Ahmed; Farah, Mohammed Jamal Mohammed; Elkhatim, Mohammed Mahjoub Sir; Abdallah, Omer Suliman Mohammed; Alfatih, Tawfig Mohammed Khalid; Supervisor, -Amel Abdelatti Ahmed Nimir (Sudan University of Science and Technology, 2017-10-20)
    Hydrotreating processes play a vital role in petroleum refineries to meet the increasing demand of transportation fuels, which is the one method of the recent trends in processing of heavier crudes with higher sulfur ...
  • Mohamed, Ahmad Ibrahim; Ibrahim, Ibrahim Mohamed; A.Jalil, Moawia Mohamed; Elhaj, Omer Mohamed; Supervisor, - Elradi Abass (Sudan University of Science and Technology, 2017-10-12)
    Oil and gas is the key word for industrial revolutionary occur worldwide, as in past and present the necessity of close monitoring for the oil and gas supply production. Decline curve analysis (DCA) is a graphical ...
  • Abd-Elrahman, Abu Sofyan Ali; Elbuseiry, Ashraf Eldigair; Elhussain, Ramy Abd El-Haleem; Mohamed, Yagoub Yousif Yagoub; Supervisor, -Elradi Abass Mohamed Nour (Sudan University of Science & Technology, 2017-10)
    When the oil recovery comes to its lower level at which the production of oil is insufficient economically. The need for tertiary methods will be necessary. These techniques are referred to the ones that used after the ...
  • Hammad, Hassan HammadIdris; Mursal, IbtihalAbdallah Hassan; Ali, Mohamed Omer Mohamed; Ibrahim, Mostafa Adam Idris; Albashir, ZeinabAbdulaziz Mohammed; Supervisor, -Abdelgadir Bashir Bannaga; Co-Supervisor, -Omer EisaBabiker (Sudan University of Science & Technology, 2017-10-10)
    The increase of carbon dioxide (CO2) emissions to our atmosphere is the major contributor to global climate change. A number of methods for reducing greenhouse gases have been proposed including carbon capture and sequestration ...
  • Hassan, Ahmed Hassan Ismael; Ramadan, Hamid Ahmed Ibrahim; Turja, Hamid Suleiman Hamid; Alamin, Mohammed Ali Mohammed; Supervisor, - Mohamed Mirghni (Sudan University of Science & Technology, 2017-10-12)
    The progressive cavity pump (PCP) is one of the best method of artificial lift which achieves the economic goals which achieve the country and company policies. Its component and function and the factor affecting it have ...
  • Mohamed, Abd alrahman Mohamed Almubark; Alhussain, Ahmed Gamer aldin Mohamed; Mohamed, Mohamed abd alrahman timan; abd algadir, Mohamed Ali magzoub; elnoor, Mubarak siddig Mubarak siraj; Supervisor, -Nuha Elzein Mohamed (Sudan University of Science and Technology, 2017-10-08)
    Integrated structural interpretation process of the reflective seismic data with wells data was conducted in Sufyan sub-basin, northwest Rakuba sub-basin in NW Muglad basin in West Kordofan State. Seismic data represented ...

View more