Bachelor of Petroleum Engineering & Technology: Recent submissions

  • Bottom Hole Assembly Analysis Using Finite Element Analysis Software 
    Ali, Adel Mohamed Bashir; Idris, Khalid Ali; shuk, Eissa Mohammed Adam; Abdo, Mukhlis Mohammed; Supervisor, -Yousif Bagadi (Sudan University of Science and Technology, 2017-10-08)
    Bottom hole assembly (BHA) is a component of a drill string that used to drill oil and gas wells. A BHA resides in the drill string above the drill bit and below the drill pipe. The primary component of the BHA is the drill ...
  • Computer program for heater Treater parameters optimization 
    Hassan, Abuzar Alsiddig; Balla, Ismaeel Alawad Mohammed; Mohammed, Razan Hassan; Alhassan, Omer Musa Ahmed; Supervisor, -Sami Mohamed Alamin Farah (Sudan University of Science and Technology, 2017-10-03)
    Emulsion refers to mixture of two or more immiscible liquids. For an emulsion to form the component should be immiscible with each other. Various equipment's are available in oil and gas industry. Heater treaters are ...
  • Production of Dimethylether (DME) from Methanol Dehydration to be used as alternative Fuel 
    Osman, Babiker Adel Babiker; Abdul-Aziz, Mohammed Ahmed Hassan; Alshiekh, Mohammed Banaga Musa; Ahmed, Nafisa Hammad Mohammed; Supervisor, -Nihad Omer Hassan (Sudan University of Science and Technology, 2017-10-04)
    Nowadays, and globally our people severe from environmental pollution, and care about energy supply stability. As we all know that petroleum base fuels have harmful nonfriend emissions like Nox, and Sox so we look after ...
  • The Influence of Steam Injection Volume on Sand and Oil Production in Cyclic Steam Stimulation (CSS) Wells 
    Ageeb, Alhadi Adam; Al-siddig, Mohammed Hussain; Nor-aldeen, Mohammed Rafie; Soliman, Mohammed Sameer; Ibrahim, Israa Hamid; Supervisor, - Yahya Sharfi (Sudan University of Science and Technology, 2017-10-10)
    Sand production is one of the major challenges that petroleum industry faces in an oil field. It is one of the oldest problems plaguing the oil and gas industry, because of its adverse effects on well productivity and ...
  • Developing aSudaneseoilfield Reservoirand Production Engineering Aspects 
    Ahmed, Abuzar AbdEllatif Ahmed Musa; Osman, Abdeen Abdelrahman Dafallah; Osman, bdElgalil Awad; Altaher, Mohammed Salman Alqurashi; Supervisor, - MohandMahjoubKhairy (Sudan University of Science and Technology, 2017-06-07)
    Field development planning comprises a great amount of investments and involves a high number of parameters related to the geological and structural characteristics of the reservoir, to the operational scheduling and the ...
  • Effect of Fly Ash on Water Based Drilling Fluids Properties Garri4 power plant sample 
    Mohamed, Abdalla Ahmed gomaa; Mulah, Mohammed AbdoBasheir; Fadolalla, MohanadShaaeldien Ibrahim; Ahmed, Zahra saifAldien Mohamed (Sudan University of Science and Technology, 2017-06-10)
    The objective of a drilling operation is to drill, evaluate and complete a well that will produce oil and/or gas efficiently, drilling fluids perform numerous functions that help make this possible so it is very important ...
  • Study the Sand Production Problem for Sudanese Oil Field (FNE Case Study) 
    Elbasheer, Mohammed Abdalla; Elzubeir, Ahmed Osman; Ahmed, Hitham Omer Mohamd; Abdelwahab, Rashid Mahdi (Sudan University of Science & Technology, 2016-10-01)
    The production of formation sand is a problem associated with most oil deposits in the world. Major Sand production effects affect safety, well or field economics and continuous production. This has prompted the continued ...
  • Prediction of Liquid Loading in Gas Well (A1), and Solve It by Using Velocity String 
    Yaqoup, Mahmoud Hassan; At-tijani, Mustafa Okasha; Abdalla, Mortada Ahmed; Omer, Mohammed Hassan (Sudan University of Science & Technology, 2016-11-01)
    Human development is closely linked to energy consumption, natural gas is environmental friend energy source compared with other sources, so it demand increases by a day, and represent almost one third of the global primary ...
  • Reservoir rocks characterization in Bentiu formation, block (6), Muglad rift basin through wire line logs and laboratoty analyses 
    Dahab, Amir Mohamed Jamal; Osman, Omar Salah Hassan; Ibrahem, Moayad Mohamed Bahageel; Hamad, Mohamed Al Daw Hemida; Mohey Aldin, Mohamed Almudather (Sudan University of Science & Technology, 2016-10-01)
    The present study could provide valuable informations will be helpful in oil production from Bentiu formation in the future. The study objective is to characterize the reservoir rocks of Bentiu formation in the Muglad rift ...
  • Application of Gravity Method in El-Maseed Area 
    Abdallah, Abdallah Emad ElDein; Bakheit, Abubaker Awad Elkareem; Mustafa, Abubaker Ahmed; FathElRahman, Mamoun Hassan (Sudan University of Science & Technology, 2016-10-01)
    The study area lies in Middle Sudan and is situated in the Jazeera State. It is bounded by latitudes (14° _ 15.5 ° N) and longitudes (32° _ 33.5° E). Almost the whole area covering the Study area can be accessed through ...
  • New Computer Program to Calculate Pressure Drop in Pipes 
    Elnour, Kamal Elnour Kamal; Elhassan, Mohamed Abd Elhamid Mohamed; Ahmed, Mohamed Mamoun (Sudan University of Science & Technology, 2016-10-01)
    The pressure drop calculations in any producing system is depends mainly on the multi-phase correlations which is a function of fluid properties and pipe conditions. Many correlations were available for the calculations ...
  • The effect of Fracture Length and Conductivity on Well Production - Case Study Gas Field- Sudan 
    Ali, Abbas Haider Abbas Mohammed; Mohammed, Abd alrhman Ahmed Dafallah; Mustafa, Anas Daffalla Malik; Hamid, Mojeeb Alrahman Abdelmuneim Bashier (Sudan University of Science & Technology, 2016-10-01)
    Hydraulic fracture is a well stimulation technique in which a pressure-induced fracture to form a conductive path for trapped fluids in low permeable zone; it is also applied to unconsolidated high permeable zone to control ...
  • EVALUATION OF SURFACTANT FLOODING FOR ENHANCED OIL RECOVERY AS A POSSIBILITY IN (Bamboo-FIELD) BASED ON APPLIED RESERVOIR SIMULATION (CMG) 
    Ali, Khaled Sayed Mohammed; Hamad, Maher Ahmed Awadalkreem; Ahmed, Mohammed Alfadel Bushra; Almubarak, Mohammed Mubarak Altayeb (Sudan University of Science & Technology, 2016-10-01)
    EOR methods are used extensively nowadays for increasing ultimate oil recovery and the effectiveness of each method depends on the characteristics of the reservoir. The target of this study is to determine the optimum ...
  • Gas Production Forecasting for a Sudanese field 
    Mohamed, Ahmed Mohamed Ali; Awadallah, Awadallah Mohamed; Omer, Mohamed Ahmed Mohamed; Abdullah, Sofian Mohamed Ahmed (Sudan University of Science & Technology, 2016-10-01)
    FN4 هو قطاع من حقل نفط FN هو السودان، الحقل يحتوي أساسا 3 طبقات رئيسية من النفط الخفيف, الثقيل والغاز في طبقة ابوجابرة. وتستخدم العديد من الطرق للتنبؤ الهيدروكربونية الأصلي (H.C) في المكان. تم استخدام مجموعة النمذجة ...
  • Feasibility of Using Solar Thermal Enhance Oil Recovery in Sudanese Oilfield Fula North East (case study) 
    Ibrahim, Abubker Omer Mohammed; Ahmed, Aseel Rashad Mohamed; Mohamed, Braa Hassan Abd-Allah; Zaroug, Osman Khogali Ibrahim (Sudan University of Science & Technology, 2016-10-01)
    Using solar thermal steam generation in Thermal Enhance Oil Recovery has garnered interest since Solar Thermal Enhance Oil Recovery (Solar T-EOR) proved to be economically competitive, environmental friendly and moreover ...
  • Hydrocarbon Potentiality in NW Muglad Basin Using Integrated 2D Seismic and logging Data 
    Hussein, Abubaker Mohamed Shoaib; Abdullah, Alla Abdullah Hassan; Salih, Nooreddaiem Abdullahi Almahdy; Adam, Yahya Adam Mohammed (Sudan University of Science & Technology, 2016-10-01)
    Integrated structural interpretation process of the reflective seismic data with wells data was conducted in AbuGabra area, northwest Muglad basin in West Kordofan state. Seismic data represented by three two dimensional ...
  • Evaluation of Local Bentonite for Utilization as Oil Well Drilling Mud (Ed-Damazin Sample) 
    Manoufali, Omer Alfadil Ahmed; Ali, Mutasim Hamed Abdalla; Ahmed, Mutasim Ahmed Kamel; Marghani, Mohammed Fareed (Sudan University of Science & Technology, 2016-10-01)
    This research focuses on the possibility of the utilization of local bentonitic clays as a basic material for drilling fluids application in order to increase the national income by adding natural resources and to decrease ...
  • Computer Program For Drilling Optimization And Drilling Cost Analysis 
    Ahmed, Ahmed Eltayeb Hassan; Musa, Hadeel Mustafa Yousuf; Ali, Ibrahim Hussein Ibrahim; Shantair, Suha abdallah Mohammed (Sudan University of Science & Technology, 2016-10-01)
    Rock drilling is the process employed to retrieve both the conventional and the unconventional resources, such as oil and gas buried under the ground. This project attempts to improve understanding of the parameters that ...
  • Designing of Steam Flooding Pilot Test for a Sudanese Oil Field (FNE Oil Field-Case Study) 
    Omar, Muntasir Mohammed; Elzain, Mohammed TahaDafalla; Albasheer, ImanAbdElraheemAlzubair; Dafallah, Abdelbagi Dafallah Abdelgabar (Sudan University of Science & Technology, 2016-10-01)
    Thermal methods are the most commonly used and most advanced enhanced oil recovery methods around the world. They are best suited for heavy oils (10º-20º) API, and tar sands (≤10 API). One of the thermal EOR method is the ...
  • Laboratory Evaluation of suspension of Local Lost Circulation Materials (LCM) in a Drilling fluid 
    Adam, Ahmed Abdulaziz Abdelgader; Ebied, Mohammed Hassan Hashim; Mohammdain, Osman Abdullah Mustafa; Ahmed, Zahir Elneel Mohammed (Sudan University of Science & Technology, 2016-10-01)
    Loss of drilling fluids into formations (i.e., lost circulation [LC] through natural/induced fractures) is a recurring and costly issue within the industry. Numerous solutions/practices are applied to ...

Share

Search SUST


Browse

My Account