Bachelor of Engineering: Recent submissions

  • Structural Design and Analysis of a Light Aircraft Wing 
    Abdullah, Aliaa Salih Ali; ALbasheer, Hana Mohamed ALmagzob; ALsaid, Tagwa Ahmed; Mohammed, Yagein Abdalmoniem (Sudan University of Science and Technology, 2014-09-10)
    Wing structure consists of skin, ribs and spars sections. The spars carries flight load and the weight of the wings while on the ground. Other structural and forming members such as ribs are attached to the spars, with ...
  • Design of Solar Energy Voltage Regulator for Aviation Applications 
    Ahmed, Fatima Hassan Mohamed Alsheikh; Ali, Mohamed Taj Aldeen Osman; Osman, Shimaa El-zein Altaj (Sudan University of Science and Technology, 2014-09-10)
    A PV voltage regulator for solar application is proposed to boost and regulate the voltage to charge an aircraft 12V/0.43A battery. The proposed regulator is designed using a boost converter and PWM controlled by a PI ...
  • نظام إدارة الإنتاج باستخدام برنامج ميكروسوفت إكسل : دراسة تطبيقية في مصنع المذاق للمياه المعدنية 
    محمـــــد، أيمــن عاصــــم أحمــــــد; أبوستـة،زاهــد الفاتح مصطفى; محمـــد،محمــد بابكر ميرغني (جامعة السودان للعلوم والتكنولوجيا, 2014-08-10)
    يستهدف هذا البحث الإشكال الإداري في المشاريع الصناعية الصغرى في السودان . وبالأخص إشكال إدارة الإنتاج ومتعلقاته . يستهدفه بقصد حله على مستويين. المستوى الأول يتمثل في الهيكل الإداري من حيث علاقاته و تكاليفه و تطويره . ...
  • دراسة جدوى فنية واقتصادية لورشة متكاملة حديثة لصيانة السيارات بجامعة السودان 
    عوض الكريم، عبد الله محمد احمد; محمـد، مــازن الزاكــي الحسـيـــن; السني، محمـــد أحمــــد مصطفـى (جامعة السودان للعلوم والتكنولوجيا, 2014-08-10)
    تعتبر ورش صيانة السيارات الموجودة في السودان في المؤسسات الحكومية قليلة جداً تعتبر تقليدية نوعاً ما في هذا البحث تم تقديم دراسة متكاملة لورشة صيانة سيارات حديثة تخدم جامعة السودان للعلوم والتكنولوجيا ويمكن أن تصبح استثماراً ...
  • سياسة الصيانة المتبعة في شركة كولدير الهندسية 
    جبرائيل،أيوب جمــال موهــــــــوب; المـاحي،, صلاح الدين محمد أحمد; محــــــارب، ميــــنا نبــيل صـبـــحي (جامعة السودان للعلوم والتكنولوجيا, 2014-08-10)
    الصيانة هي الوظيفة التي تمكن من تهيئة المعدات لكي تعمل بفعالية وهي نشاط يصمم من أجل الحفاظ على المعدات وغيرها من الموجدات في حالة تشغيلية . تشكل الصيانة نسبة كبيرة من تكلفة الإنتاج حوالي 20% وبدراسة نظم السياسة المتبعة ...
  • EFFECT of COATING on RESIDUAL STRESSES in ELCTROSTATIC ACTUATOR MEMS DEVICE 
    Badry, Amro Saif aldeen Mohamed; Ahmed, Omer Mohamed Altayib; Ibrahim, Mohamed Hayder Hamed (Sudan University of Science and Technology, 2014-08-10)
    Constitute the pressures or stresses remaining one problems resulting from manufacturing may affect these stresses negatively on the performance of manufactured parts. These residual stress may be negative or positive, ...
  • Position Control of a Micro Electro Mechanical Actuator By Using MATLAB And ANSYS 
    Ali, Altayeb Abdalla Altayeb Alhaj; Hammad, Ezzaddein Adam Edreis; Osman, Saddam Mohamed Salih (Sudan University of Science and Technology, 2014-08-10)
    Electrostatic actuators have a large effect in many MEMS devices, e.g. sensors, actuators. The amount of applied voltage to an electrostatic actuator has a direct impact in the displacement of the cantilever between the ...
  • DESIGN OF A TYPICAL MULTI-ROLE VEHICLE USING QUAD-ROTOR THEORY 
    Koko, Mohamed Imad Aldieen Adlan (Sudan University of Science and Technology, 2014-08-10)
    This research presents a design of a typical multi-role vehicle that can be used in the air, above the water and the ground as a typical remote controlled “RC” model. The design of the vehicle was a challenge of combining ...
  • Planning and implementing of Industrial unit by using network analysis In (Reinforcement Steels Preparation Unit) 
    Alsir, Abdalraheem Almamoon; Ragab2., Abubakr Mohamed; Alhadi, Alhadi Alfatih (Sudan University of Science and Technology, 2014-08-10)
    The research scope was project management and planning using critical path method , it was applied on planning and implementing a reinforcement steel preparation unit , which is a unit that used to cut ,bend , and prepare ...
  • Study method of manufacturing water bottles 
    Hassan, Almohtde Abody Mahmmoud; Mahmmoud, Moayed Omer El-Tayeb; Mohammedden, Rami Salah Nasur (Sudan University of Science and Technology, 2014-08-10)
    This research aims to design a template to produce water bottles with volume of (500 ml) and the type of plastic used in the manufacturing pet . size was selected according to standard template all the parts and dimensions ...
  • Compensating Frequency Change using DC Static Voltage On Electrostatic Actuator 
    Sharief, Abdelsamad Mahmoud Hussien; Ali, Mohammed Elsiddig; Ali, ObadaAbdElraouf (Sudan University of Science and Technology, 2014-08-10)
    Electrostatic actuators have major role in many MEMS devices, e.g. sensors, actuators. The amount of applied voltage to an electrostatic actuator has a direct impact on frequency throughout the actuator. This research aims ...
  • Modeling and Simulation of a MEMS gyroscope using Analysis 
    Majzoob,Sabir Sabir Mohammed; Salih,Rami Hussein; Mustafa,Amjed Abdel Hameed Zaki (Sudan University of Science and Technology, 2014-08-10)
    Micro electro mechanical systems refer to devices or systems integrated with electrical and mechanical components that are in Micro scale. With its small size, low cost and efficiency the technology has been widely used ...
  • الحماية المثلى من اشعة الليزر 
    الفكي،صالح بابكر صالح; النبريص،محمود زيدان جابر; عمر،محمود محمد صالح (Sudan University of Science and Technology, 2014-08-10)
    في هذا المشروع تم البحث عن انظمة ومعدات الحماية والوقاية لأجهزة الليزر المستخدمة في المجال الطبي داخل السودان والاسس والقواعد المفروضة من قبل الدولة ومدى تطبيقها داخل المؤسسات الصحية ومقارنتها مع انظمة الحماية الموضوعة من ...
  • System of Preventive Maintenance In Microbilogy Department Equipment of National Laborotary for Bublic Health (STACK) 
    Mahgoub, Rimaz Emad Aldeen; Mohammed, Sara Seed Ahmed; Hassan, Tagreed Albadawi (Sudan University of Science and Technology, 2014-09-10)
    The most critical problem facing the medical device is the downtime. One of the most common causes of medical devices' downtime is poor maintenance. For that problem daily check up for medical devices must be done ...
  • NON INVASIVE BLOOD GLUCOSE MEASUREMENT 
    HASSAN, HASSAN ALI; MOHAMED, MOHAMED OSMAN; ALSEED, ABD ALSALAM AWAD (Sudan University of Science and Technology, 2014-08-10)
    Determination of blood glucose level is a frequently occurring procedure in diabetes care. As the most common method involves collecting blood drops for chemical analysis, it is invasive and liable to afflict a degree of ...
  • Electrical Safety in Clinical Engineering (The Lack of Earthing) 
    Ahmed, Ahmed Alsir; Abd Almagid, Ammar Osman; Alamin, Moaz Sidieg (Sudan University of Science and Technology, 2014-08-10)
    The importance of this study stems from the significant role of earthing in electrical safety. The purpose of this study is to provide an evaluation of earthing implementation in Khartoum hospitals. Results indicated ...
  • Basic Aspect for Specify the Medical Device 
    Osman, Abdalmoumen Hashim; Mahmoud, Abdalrafii Mohamed; Abdalgadir, Abdalgadir Gebreel (Sudan University of Science and Technology, 2014-08-10)
    Medical devices cover a variety of products designed to diagnose and treat patients. These devices range from a simple medical glove to a complicated Magnetic Resonance Imaging machine (MRI). However different ...
  • DIGITAL T-SHIRT 
    Elsakhy, Sara Elsir; Saeed, Mawada Abdalbasit; Ibrahim, Mayada Abdelmonem (Sudan University of Science and Technology, 2014-08-10)
    changing in heart rate and body temperature are primary indicators of abnormality functions and health conditions for human. This project introduced design and implement integrated circuit to measure and monitor ...
  • wireless wearable pulse oximeter sensor 
    Husain, Reem sameer mohammed; Gaweesh, Amani A. Alrahman Salih; Abd Alraheem, Rania Tarig Ibrahim (Sudan University of Science and Technology, 2014-08-10)
    This project aim is designing a wireless wearable plus oximeter .there is two unit , the first one to measure ,calculate and transmit the heart rate and the oxygenation (sensor unit). The second unit contains from the ...
  • Design of Electronic Thermo-stethoscope 
    Abdullah, Alaa Abdelrahman; Osman, Esraa Mohamed; Dahab, Samah Mohamed (Sudan University of Science and Technology, 2014-08-10)
    The stethoscope is an acoustic medical device for listening to internal sounds in human body. One problem with acoustic stethoscopes is that the sound level is extremely low. The thermometer is medical device used to ...

Search SUST


Browse

My Account