Masters Dissertations : Engineering Technology Industries: Recent submissions

  • Enhancement of Vehicle Airbag Nylon 66 Fabric Properties Coated with PVA/Silica Nanoparticles Composite 
    Ali, Salma Zakaria Salman; Supervisor, -Hasabo Abdelbagi Mohamed Ahmed (Sudan University of Science & Technology, 2019-05-12)
    The vehicle airbags are safety systems used to cushion the driver or passenger during a collision and reduce bodily injuries. Airbags are typically made from woven fabric, which may be coated or uncoated fabric. In this ...
  • Hydrophobicity of Cotton Fabric Treated With Silica Nanoparticles 
    Hassan, Rahma Adam Aissa; Supervisor, -HasaboAbdelbagi Mohamed Ahmed (Sudan University of Science & Technology, 2021-11-22)
    To obtain the hydrophobicity cotton fabrics, cotton fabrics were treated with silica nanoparticles and/or accost effective Water Repellent agent (WR agent).Two different silica nanoparticles were synthesized via a sol–gel ...
  • A Sustainable Approach to Reduce Environmental Threats of Oxidative Degradation of Plastic Films 
    Ahmed, Samah Suliman Alhaj Mohammed; Supervisor, -Mohamed Deen Hussein Mohammed (Sudan University of Science & Technology, 2021-12-29)
    Plastic pollution of the environment is a serious since the plastics production worldwide now is about 400 million tons. Many items of plastics products cannot be collected in order to recycle. The recycled plastics is ...
  • Green Synthesis of Silver Nano-particles by Using Fenugreek Seeds Extract and Application as Antifungal Agent 
    Elsiddig, Eiman Seif Eldeen Hassan; Supervisor, -Hasabo Abdelbagi Mohamed Ahmed (Sudan University of Science & Technology, 2022-03-12)
    Recently, researchers turned to green and environmentally friendly ways to prepare nanoparticles, due to the safety of the environment and low cost. This research aims to synthesize silver Nano-particles to be used as an ...
  • Synthesis and Application of Zinc Oxide Nanoparticles as Antibacterial Agent 
    Shareef, Amro Abdullah Shiekhaldeen; Supervisor, -Hasabo. Abdelbagi Mohamed Ahmed (Sudan University of Science and Technology, 2020-12-20)
    In this work Zinc Oxide nanoparticles (NPs) are synthesisedusing wet chemistry hydrothermal method using equimolar quantities of Zinc Acetate dehydrate & Sodium Hydroxide, and the formed NPs are used to test their ...
  • Synthesis and Characterization of Zinc Oxide Nanoparticles using Tomato Extract 
    Abdelrhman, Maab Azhari Khalafalla; Supervisor, -Hasabo Abdelbagi Mohamed Ahmed (Sudan University of Science & Technology, 2020-10-20)
    Today's scientists and engineers are finding a wide variety of ways to deliberately make materials at the nanoscale to take advantage of their enhanced properties such as higher strength, lighter weight, increased control ...
  • Synthesis of Copper Nanoparticles by using solenostemma argel extract and Application as antibacterial Agent 
    Amin, Mai Shamseldin Omer; Supervisor, - Hasabo Abdelbagi Mohamed Ahmed (Sudan University of Science and Technology, 2020-01-10)
    Metallic nanoparticles of copper were synthesized by green methods using an aqueous solution of Solenostemma argel extract (The extract was mixed well with cupric Nitrate Trihydrat). The plant extract acts as both, the ...
  • Enhancement of the properties of Flexible PVC 
    Mohammad, Badr Hassan Omer; Supervisor, - Mohameddeen Mohamed (Sudan University of Science and Technology, 2019-10-10)
    The compounding of PVC resin and PVC recycle with some additives was studied to improve the properties of PVC. Different additive involve, plasticizer and were mixed with base polymer. These formulations are used in ...
  • Effect of Loop Lengths on Negative Poisson’s Ratio of Weft knitted Fabric Reinforced Epoxy Composite 
    farh, Nada Osman Mohamed; Supervisor, Ramadan Mohammed Ahmed (Sudan University of Science and Technology, 2019-05-10)
    Conventional fabrics usually exhibit a positive poisons ratio (PR), i.e. they laterally shrink when stretched and laterally expand when compressed. On the contrary, auxetic fabrics exhibit a negative PR, i.e., they laterally ...
  • Mechanical Properties of Banana Fibers Reinforced Polyester Composite 
    Mudawi, Omniyat Zain Elabdeen Elbadawi; Supervisor, Ahmed Ibrahim Seedahmed (Sudan University of Science and Technology, 2019-05-10)
    Natural fibers has been used extensively in various engineering fields, the mechanical properties of banana fibers play a broad role in determining their applicability in various industrial and engineering fields such ...
  • Preparation and Characterization of Chitosan/Silver Nano-composite and its Application on Nile Water as Antibacterial Materials 
    Elfaig, Heba Awadallah Mastwr; Supervisor, Hasabo Abdelbagi Mohamed Ahmed (Sudan University of Science and Technology, 2019-10-15)
    The prepared chitosan nanocomoposite in this study may demonstrate the potential in optimizing the minimum amount required to achieve complete inactivation of various bacteria in Nile water. The objective of this research ...
  • The Use of Steel Slag in Manufacturing of Portland cement 
    Abd AlRahman, Doha Yahia Alsadig; Supervisor, - Kamil M.A Wagialla (Sudan University of Sciences and Technology, 2019-01-10)
    The main objective of this research is to determine the effectiveness of local Electric Arc Furnace Slag (EAFS) as a replacement material in cement mortar and to determine the degree of its pozzolanicity. The ...
  • Modeling and Analysis of Film Blowing process 
    Alamin, Nehad Fadulallah Alsadig; Supervisor, - Mohamed din Hussein (Sudan University of Sciences and Technology, 2018-11-10)
    The manufacture of plastic bags (HDPE, LDPE, LLDPE) is one of the leading industries in the world and has a strong consumer demand for packaging and packaging. The research examined the design of the film machine by analyzing ...
  • Preparation of an Antimicrobial Cotton Fabric Using Synthesized Zinc Oxide Nanoparticles Stabilized by Alovera Gel 
    Gasm Allah, Omsalma Gasm Allah Babiker; Supervisor, - Magdi Elamin Gibril (Sudan University of Science and Technology, 2018-11-10)
    Nano-finishing is one of the most promising candidate, which is increasing significantly now a day in textile fields, which are ranging from the protective finishing such as; smart textiles, Hygiene textiles, antiballistic, ...
  • Glass Fibers/ Epoxy PVC Sandwich Composite for Train Body Structure 
    Saad, Saad Mustafa Ibrahim; Supervisor, - Ramadan Mohmmed Ahmed (Sudan University of Science and Technology, 2019-04-10)
    Sandwich composites materials are of interest in industrial applications due to their high strength-to-weight ratio and tolerable mechanical properties. This study to describes the use of composite sandwich materials in ...
  • APPLICATION OF TOTAL QUALITY MANAGEMENT ON GARMENTS MANUFACTURING IN SUDAN 
    WEDAAALA, MUY ALSHAZLY HABOB; Supervisor, - MOHAMMED AHMED EBRAHIM ALI ELGALIB (Sudan University of Science and Technology, 2019-02-10)
    This study aimed to use and attempted to apply total quality management TQM in the Sudanese garment manufacturing factories to improve productivity and profitability and product quality and solving the factory's problems ...
  • DESIGN AND SIMULATION OF INJECTION MOLD FOR PRODUCING PLASTIC WALL PLUGS 
    Eltom, Tasneem Elfatih Haj; Supervisor, Malik Eltahir Elhadi (Sudan University of Science and Technology, 2017-12-10)
    A lot of plastic parts that have a high demand in the Sudanese market are imported from other countries like China and India while it could be designed and manufactured locally. These parts could be designed from the initial ...
  • Study of the effect of graphite on electrical properties of High Density Polyethylene 
    Hussein, RihamAdil Mohamed Alnor; Supervisor, - ArmanMohmmed (Sudan University of Science and Technology, 2018-01-10)
    A sample of high density polyethylene and graphite powder was made to study the effect of graphite power content on the electrical properties of high density polyethylene, graphite offers the benefit of low density and ...
  • Simulation of Upper Arm of cars Using Carbon Fiber Composite and Steel Alloy 
    Idrees, AbdElrahman Basheer Mohamed; Supervisor, - Arman Mohammed Abdallah (Sudan University of Science and Technology, 2017-11-10)
    This project aims to design the upper arm of suspension system of the car from carbon fiber composite using simulation of solidworks software, that to predict the maximum load suitable to the design and if it possible to ...
  • The effect Of Thickness an Temperature on The burst Pressure of HDPE Pipes 
    Alanaaf, Ahmed Braies Kazma; Supervisor, - Mohamed Deen Hussien (Sudan University of Science and Technology, 2017-09-10)
    The hydrostatic pressure test was used for the high density polyethylene HDPE-100 Pipes to determine the pressure and time for failure and the relation between the two parameters. The study concluded the failure take ...

Share

Search SUST


Browse

My Account