• Upgrading of Heavy Crudes and Residue for Liquid fuels production 

  Ali, Yasir Abdalla Dafaalla; Supervisor, -Gurashi Abdalla Gasmelseed; Co-Supervisor, -Tomadir Awad Ibraheem Hamed (Sudan University of Science & Technology, 2021-10-21)

  Trends have predicted that peak oil production, will be reached around 2020-2030, where the production of oil starts to decline after that, there will be less and less oil to refine, the depletion of light oil and the ...
• Enhancement of Vehicle Airbag Nylon 66 Fabric Properties Coated with PVA/Silica Nanoparticles Composite 

  Ali, Salma Zakaria Salman; Supervisor, -Hasabo Abdelbagi Mohamed Ahmed (Sudan University of Science & Technology, 2019-05-12)

  The vehicle airbags are safety systems used to cushion the driver or passenger during a collision and reduce bodily injuries. Airbags are typically made from woven fabric, which may be coated or uncoated fabric. In this ...
• Hydrophobicity of Cotton Fabric Treated With Silica Nanoparticles 

  Hassan, Rahma Adam Aissa; Supervisor, -HasaboAbdelbagi Mohamed Ahmed (Sudan University of Science & Technology, 2021-11-22)

  To obtain the hydrophobicity cotton fabrics, cotton fabrics were treated with silica nanoparticles and/or accost effective Water Repellent agent (WR agent).Two different silica nanoparticles were synthesized via a sol–gel ...
• A Sustainable Approach to Reduce Environmental Threats of Oxidative Degradation of Plastic Films 

  Ahmed, Samah Suliman Alhaj Mohammed; Supervisor, -Mohamed Deen Hussein Mohammed (Sudan University of Science & Technology, 2021-12-29)

  Plastic pollution of the environment is a serious since the plastics production worldwide now is about 400 million tons. Many items of plastics products cannot be collected in order to recycle. The recycled plastics is ...
• The Use of Glass Fiber Reinforced Epoxy Composite in Automotive Bumper Applications 

  Fadelelseed, Abdeldaim Abdelgader Ali; Supervisor, -Ahmed Ibrahim Ahmed; Co-Supervisor, -Ramadan Mohamed Ahmed (Sudan University of Science & Technology, 2022-02-12)

  The application of composite materials to structures nowadays presented the need for engineering analysis and modeling to understand failure mechanisms. Modern automotive industry reveals that plastics can be reinforced ...
• Green Synthesis of Silver Nano-particles by Using Fenugreek Seeds Extract and Application as Antifungal Agent 

  Elsiddig, Eiman Seif Eldeen Hassan; Supervisor, -Hasabo Abdelbagi Mohamed Ahmed (Sudan University of Science & Technology, 2022-03-12)

  Recently, researchers turned to green and environmentally friendly ways to prepare nanoparticles, due to the safety of the environment and low cost. This research aims to synthesize silver Nano-particles to be used as an ...
• Applying industrial management for improving productivity In Dubai steel factory in Sudan 

  Mohamd, Ashraf Eltayib Dafallah; Supervisor, -Essam Abbakar Eshaq; Co-Supervisor, -Alfateh Abbas Alqourashi (Sudan University of Science and Technology, 2021-07-22)

  The iron and steel industry is an important basic industry of Sudan national economy and plays a vital role in the process of industrialization and urbanization. Prosperity in steel sector reflects positively in national ...
• Modeling and Analysis of Polypropylene Fiber Extrusion Process 

  Adam, Abdelbagi Yusuf Abdelbagi; Supervisor, -Ahmed Ibrahim Ahmed; Co-Supervisor, -MuhabSalahaldenShalby (Sudan University of Science and Technology, 2021-07-12)

  Extrusion processes are widely used in plastic industries aiming to produce advanced solutions for increasingly sophisticated demands for plastics.Processes are not designed based on professional engineering design, but ...
• Synthesis and Application of Zinc Oxide Nanoparticles as Antibacterial Agent 

  Shareef, Amro Abdullah Shiekhaldeen; Supervisor, -Hasabo. Abdelbagi Mohamed Ahmed (Sudan University of Science and Technology, 2020-12-20)

  In this work Zinc Oxide nanoparticles (NPs) are synthesisedusing wet chemistry hydrothermal method using equimolar quantities of Zinc Acetate dehydrate & Sodium Hydroxide, and the formed NPs are used to test their ...
• Synthesis and Characterization of Zinc Oxide Nanoparticles using Tomato Extract 

  Abdelrhman, Maab Azhari Khalafalla; Supervisor, -Hasabo Abdelbagi Mohamed Ahmed (Sudan University of Science & Technology, 2020-10-20)

  Today's scientists and engineers are finding a wide variety of ways to deliberately make materials at the nanoscale to take advantage of their enhanced properties such as higher strength, lighter weight, increased control ...
• Synthesis of Copper Nanoparticles by using solenostemma argel extract and Application as antibacterial Agent 

  Amin, Mai Shamseldin Omer; Supervisor, - Hasabo Abdelbagi Mohamed Ahmed (Sudan University of Science and Technology, 2020-01-10)

  Metallic nanoparticles of copper were synthesized by green methods using an aqueous solution of Solenostemma argel extract (The extract was mixed well with cupric Nitrate Trihydrat). The plant extract acts as both, the ...
• Development of New Vapor Pressure Correlation for Organic Compounds 

  Ali, Nassereldein Musa Abakar; Supervisor, - Ali A. Rabah (Sudan University of Science and Technology, 2020-11-10)

  The vapor pressures of organic compounds are the most important thermodynamics property needed by engineers in different industries for instant petrochemical and chemical processes as it is a useful thermodynamic property ...
• Tanneries Liquid Waste Management 

  Tayfor, Rehab Ahmed Selman; Supervisor, - Gurashi Abdalla Gasmelseed (Sudan University of Science and Technology, 2020-01-10)

  Tanneries use much of chemicals such as sodium sulphide, calcium hydroxide, ammonium sulphate, acids, basic chromium sulphate bactericide and fungicide. All these substances contribute to the environment pollution, and ...
• Enhancement of the properties of Flexible PVC 

  Mohammad, Badr Hassan Omer; Supervisor, - Mohameddeen Mohamed (Sudan University of Science and Technology, 2019-10-10)

  The compounding of PVC resin and PVC recycle with some additives was studied to improve the properties of PVC. Different additive involve, plasticizer and were mixed with base polymer. These formulations are used in ...
• Effect of Loop Lengths on Negative Poisson’s Ratio of Weft knitted Fabric Reinforced Epoxy Composite 

  farh, Nada Osman Mohamed; Supervisor, Ramadan Mohammed Ahmed (Sudan University of Science and Technology, 2019-05-10)

  Conventional fabrics usually exhibit a positive poisons ratio (PR), i.e. they laterally shrink when stretched and laterally expand when compressed. On the contrary, auxetic fabrics exhibit a negative PR, i.e., they laterally ...
• Mechanical Properties of Banana Fibers Reinforced Polyester Composite 

  Mudawi, Omniyat Zain Elabdeen Elbadawi; Supervisor, Ahmed Ibrahim Seedahmed (Sudan University of Science and Technology, 2019-05-10)

  Natural fibers has been used extensively in various engineering fields, the mechanical properties of banana fibers play a broad role in determining their applicability in various industrial and engineering fields such ...
• Preparation and Characterization of Chitosan/Silver Nano-composite and its Application on Nile Water as Antibacterial Materials 

  Elfaig, Heba Awadallah Mastwr; Supervisor, Hasabo Abdelbagi Mohamed Ahmed (Sudan University of Science and Technology, 2019-10-15)

  The prepared chitosan nanocomoposite in this study may demonstrate the potential in optimizing the minimum amount required to achieve complete inactivation of various bacteria in Nile water. The objective of this research ...
• The Use of Steel Slag in Manufacturing of Portland cement 

  Abd AlRahman, Doha Yahia Alsadig; Supervisor, - Kamil M.A Wagialla (Sudan University of Sciences and Technology, 2019-01-10)

  The main objective of this research is to determine the effectiveness of local Electric Arc Furnace Slag (EAFS) as a replacement material in cement mortar and to determine the degree of its pozzolanicity. The ...
• Modeling and Analysis of Film Blowing process 

  Alamin, Nehad Fadulallah Alsadig; Supervisor, - Mohamed din Hussein (Sudan University of Sciences and Technology, 2018-11-10)

  The manufacture of plastic bags (HDPE, LDPE, LLDPE) is one of the leading industries in the world and has a strong consumer demand for packaging and packaging. The research examined the design of the film machine by analyzing ...
• Garment Assembly Line Balancing Using Modeling and Simulation 

  Mohammed, Hanan Osman Ali; Supervisor, -Ahmed Ibrahim Seedahmed (Sudan University of Science and Technology, 2019-05-10)

View more