SUST Repository

Masters Dissertations : Engineering Technology Industries

Masters Dissertations : Engineering Technology Industries

 

Recent Submissions

  • Eltom, Tasneem Elfatih Haj; Supervisor, Malik Eltahir Elhadi (Sudan University of Science and Technology, 2017-12-10)
    A lot of plastic parts that have a high demand in the Sudanese market are imported from other countries like China and India while it could be designed and manufactured locally. These parts could be designed from the initial ...
  • Hussein, RihamAdil Mohamed Alnor; Supervisor, - ArmanMohmmed (Sudan University of Science and Technology, 2018-01-10)
    A sample of high density polyethylene and graphite powder was made to study the effect of graphite power content on the electrical properties of high density polyethylene, graphite offers the benefit of low density and ...
  • Idrees, AbdElrahman Basheer Mohamed; Supervisor, - Arman Mohammed Abdallah (Sudan University of Science and Technology, 2017-11-10)
    This project aims to design the upper arm of suspension system of the car from carbon fiber composite using simulation of solidworks software, that to predict the maximum load suitable to the design and if it possible to ...
  • Alanaaf, Ahmed Braies Kazma; Supervisor, - Mohamed Deen Hussien (Sudan University of Science and Technology, 2017-09-10)
    The hydrostatic pressure test was used for the high density polyethylene HDPE-100 Pipes to determine the pressure and time for failure and the relation between the two parameters. The study concluded the failure take ...
  • Marhom, Mustafa Yousif Bakhet; Supervisor, - Mohamed Deen Hussien (Sudan University of Science and Technology, 2017-09-10)
    Plastic filed has become most usable in all industries plastic products vary depending on the machine used in production process. In film industry there are different type of material can be use , like HDPE, LDPE.LLDPE ...
  • Ahmed, Osama Hakim Mirghani Hakim; Supervisor, - Mohamed Deen Hussein Mohamed (Sudan University of Science and Technology, 2017-09-10)
    This research study process of combined process of injection of preform and immediately then blowing of these preform on the same machine. Such a process has its advantages compared with the traditional sequence of preform ...
  • Ali, Musab Khalafalla Elfadil; Supervisor, - Ahmed Ibrahim Seedahmed (Sudan University of Science and Technology, 2017-09-10)
    The field of quality undergoes significant changes as reflected by changes in its definition, approaches, techniques, and scope of application. Changes in customer expectation. This also calls for special attention to the ...
  • Mohammed, zeinab Mustafa Suliman (Sudan University of Science and Technology, 2017-05-10)
    The aim of this study was to evaluate the performance of high strength Concrete (HSC) containing supplementary cementations materials (Silica Fume) and to find optimum range of silica fume content in the mix. In these ...
  • ABdalla, Eltoma Sedeeg Eltahir; Supervisor,- Isam Abbeker Ishag (Sudan University of Science and Technology, 2016-08-10)
    Fiber Reinforced Polymer (FRP) composites widely use in different fields such as, aerospace industries; automotive, water tank; marines; and building, etc. The current studies give a brief account of analysis of static ...
  • HAMED, MUZAKER SULEMAN; Supervisor,- Arman Mohammed Abdalla (Sudan University of Science and Technology, 2016-02-10)
    While transporting liquid in pipes, energy loss due to friction between pipe wall and liquid molecules all through the pipe and also with the sudden change in flow direction which happen because different fluid tools such ...
  • Adam, Eltayeb Abdurrahman Hamid; Supervisor - Mohamed Deen Hussein Mohamed (Sudan University of Science and Technology, 2014-04-11)
    The purpose of this research is to use Differential Scanning Calorimetry to find numerous thermal properties of a number of polymer samples. The credibility of the Differential Scanning Calorimetry device to be used was ...
  • EL-Radi, Alaa Ibrahim Mohammed; Supervisor - Mohammed Deen Hussein Mohammed (Sudan University of Science and Technology, 2014-05-11)
    The degradation of HDPE was studied by exposing HDPE to weathering. The HDPE were prepared at Adeb Plastic Factory in Omdurman. Four types of HDPE were use in this study:  Virgin HDPE.  50/50 mixture of recycle and ...
  • Salim, Wala Salah; Supervisor - IsamAbbakarIshag (Sudan University of Science and Technology, 2014-03-11)
    Composites can be defined as materials that consist of two or more chemically and physically different phases separated by a distinct interface. The different systems are combined judiciously to achieve a system with more ...
  • Agaballh, Salma Agaballh Ali; Supervisor - Mohamed Deen Hussien (Sudan University of Science and Technology, 2014-05-10)
    Due to its durability, plastics pipes are normally used for water transport. It replaced the metal pipes .the long term hydrostatic pressure test according to ASTMD2837-02 and EN921 -1994 requires very long periods for ...
  • Mohamed, Maysaa Elrasheed Rahamtalla; Supervisor - Mohamed Deen Hussein Mohamed (Sudan University of Science and Technology, 2014-04-10)
    In plastics manufacturing, the melt flow index (MFI) is used as a routine indicator of rheological behavior when more expensive and laborious determinations of well-defined material functions are impractical. The MFI is the ...
  • Ahmed, Gehan Elsayed Yousif; Supervisor - Abdalfatah Belal Abd AlsLam (Sudan University of Science and Technology, 2014-06-10)
    The expandable polystyrene is a light weight material which has been widely used in constructions, packaging and Marines devices. The manufacturing of the expanded polystyrene products is a multi-step process that depends ...

View more