Masters Dissertations : Engineering: Recent submissions

  • WCDMA Planning 
    Mustafa, Ahmed Mouawia Habib; Supervisor ,- Khalid Hamid Bilal (Sudan University of Science & Technology, 2012-06)
    The object of this project is to study, analyze and Design software program for WCDMA planning. Calculating the coverage radius and number of sites and cells using Okumara-Hata model. The planning was implemented using ...
  • A STUDY OF BID EVALVATION PROCEDURE IN SUDAN 
    Adam, Ibrahim Dowelbeit; Supervisor ,- Ibrahim Dowelbeit Adam (Sudan University of Science & Technology, 2012-07)
    The Selection of the suitable contractor is a complicated decision making for construction clients; it requires long methods depending on measurement and evaluation techniques. These methods are related to each other in ...
  • Transient Stability of Multi-Machine Wind Turbine Generators System Connected to the Grid 
    Elhassan, Ayat Younis Elshreef; Supervisor ,- Abdelelaziz Yousif Mohamed (Sudan University of Science & Technology, 2012-11)
    Today, all the world direct towards renewable sources, because it is considered a safe energy. As a result, now the studies concentrate about the reliability and continuity of the renewable energy. Though, this thesis ...
  • Improving The Performance Of Soba Brick Plant- Of The Building And Road Institute- University Of Khartoum 
    ABOSINAINA, ABDEL RAHIM MOBARAK; Supervisor ,- SABIR MOHAMED SALIH (Sudan University of Science & Technology, 2012-03)
    This research–work aims upgrading and improving the Existing upper- Draught Kiln Temperature Distribution, Reducing the Drying Cycle period by utilizing of the Kiln Hot Gases, and Improving both the kiln and dryers ...
  • Electrical Energy Demand Forecasting in Nyala city 2012-2025 
    Adam, Mohammed Eissa Abdalla; Supervisor ,- Khamis Arbeesh Saadeldin (Sudan University of Science & Technology, 2012-09)
    Demand forecasting is vitally important for the electric industry in the deregulated economy. It has many applications including energy purchasing, generation, load switching, contract evaluation, and infrastructure ...
  • Evaluation of Electrical Safety Implementation in Healthcare Facilities. 
    M. Al-shami, Mohammed Ahmad; Supervisor ,- Alnazier Osman Mohammed Hamzah (Sudan University of Science & Technology, 2012-09-10)
    The Importance of this study is presented in discussing the availability of electrical safety requirements at the healthcare facilities according to the directions and recommended standards by organizations and associations ...
  • Using UltrasonicTestingin Determiningthe Degree of Symmetry of a Steel Slab 
    Ibrahim, Ismail Adam; Supervisor ,- Awad Wida'a Musa (Sudan University for Science & Technology, 2012-07-05)
    Thiswork aimsandexplaining scientifically that Non- destructive testing plays an important role in the quality control ofa product. It is used during all the stages of manufacturing of theproducts. It decreases the cost ...
  • PROBLEMS AND SOLUTIONS OF VOLTAGE RISE IN RABAK ELOBIED TRANSMISSION LINE 
    Ahmed, Yousif Elsheakh Yousif; Supervisor ,- Khamis Arbeesh Saad Eldin (Sudan University for Science & Technology, 2012-01-10)
    A new transmission line which connects Elobied with the National Grid has been commissioned, but unfortunately there appeared a problem of voltage rise in the line. The aim of this thesis is to keep the voltage within ...
  • Effect of the Interior Gateway Routing Protocols in the Multiprotocol Label Switching Networks 
    ahmed, Suhail Badawi Abdelkarim; Supervisor ,- Sara Mustafa Eljack (Sudan University for Science & Technology, 2012-10-01)
    Traditional IP based networks, Frame Relay and ATM networks have many disadvantages in the management operation of large networks like cost, security, scalability and flexibility. To solve this, an MPLS-based VPN networking ...
  • Application of Value engineering in construction Industry in Sudan 
    Elmansour, Omerelfaroug Abdalla; Supervisor ,- Awad Saad Hassan (Sudan University for Science & Technology, 2012-10-01)
    Motivation for this research stems from the desire to define the role of value engineering in the construction industry and the belief that it can enhance the role of the engineer significantly; also research seeks to ...
  • Grid connected photovoltaic (pv) system to meet additional demand in electricity during the day 
    Elshikh, Nadia Eltayeb; Supervisor ,- Hassan Wardi (Sudan University of Science &Technology, 2012-10-01)
    In this research the importance of solar energy has been touched in Sudan so that it may by considered . The research produced sizing of a Grid connected photovoltaic system (1 MWp ) using multi Grid tie inverter ...
  • Intelligent Security System Report 
    Taha, Razaz Hamid; Supervisor ,- Abdelrasol Jbbar Alzubaidi (Sudan University for Science & Technology, 2012-06-01)
    Security systems are needed for occupants' convenience and safety. This search, present advances a new design of intelligent security system design and implementation of a low cost, low power consumption, and GSM ...
  • Improved Cooling System for X-ray Tube 
    Mohammed, Azza A/Rahman; Supervisor ,- Alnazier Osman Mohammed (Sudan University for Science & Technology, 2012-11-01)
    X-ray tube is the heart of the x-ray machine in all its types. It is the generator of the x-ray so that it can be defined as (An x-ray tube is a vacuum tube that produces x-rays. It used in x-ray machines. X-rays are part ...
  • SCADA systems technical evaluation in national load dispatch center (NLDC) 
    Siddig, Mustafa Hag Musa; Supervisor,- Awadalla Taifour Ali (Sudan University of Science &Technology, 2012-10-18)
    This study concerns with SCADA systems technical evaluation in national load dispatch center (NLDC) of Sudanese Electricity Transmission Co., Ltd. (SETCO). It shows a technical comparison study between SINAUT SPECTRUM ...
  • Possibility of Using Crude Oil as Fuel For Kosti Thermal Power Station 
    Elamin, Elhassan Elamin; Supervisor ,- Sabir Mohammed Salih (Sudan University of Science &Technology, 2012-07-16)
    This research investigates the problems caused by high viscosity of a crude oil when it is used as a fuel to run steam power plants which is proposed to be used in Kosti thermal power plant. Firstly various theories which ...
  • Intelligent Controller for Motor's Management using Protection Relay 
    Alsheikh, Mohamed Abd Alla; Supervisor ,- Eisa Bashier Mohamed (Sudan University for Science & Technology, 2012-12-01)
    The intelligent controller for motor management system offers protection, control, and monitoring capabilities for single-phase and 3-phase AC induction motors. The system is flexible and modular and can be configured to ...
  • Efficiency Evaluation of Induction Motor Using Synthetic Loading Technique 
    Zain Elabdien, Hassab Elrasoul; Supervisor ,- Abdelaziz Yousif Mohamed (Sudan University for Science & Technology, 2012-09-01)
    This thesis investigates the application of the synthetic loading technique for efficiency evaluation of induction machines. The standard tests require specialist test facilities, additional machines, and for large machines, ...
  • The Effect of Critical Factors on Construction Projects Performance in Sudan 
    Mohammed, Waled Gaber; Supervisor ,- Mohamed Ibrahim Yousif (Sudan University for Science & Technology, 2012-11-05)
    The Sudanese construction sector is characterized by many small and large projects and it is accounted for 3.2% of the Sudanese country’s GDP. The basic problems facing the Sudanese construction projects are the factors ...
  • MICROCONTROLLER BASED DAM CONTROL SYSTEM 
    Ishag, Mubarak Adam; Supervisor ,- Ala Eldin Awouda (Sudan University of Science &Technology, 2012-07-16)
    The main objective of this research is to develop a mechatronics based system, which will depend on many type of sensors such as water level, pressure and touch to make full automatic control in a real-time basis. This ...
  • Design of Supersonic Nozzle Using CFD 
    Ibrahim, Omer Musa; Supervisor ,- Eimad Eldin Elhadi (Sudan University for Science & Technology, 2012-12-01)
    The goal of this research is to design a minimum length supersonic nozzle (MLN) and develops a computer code which uses the Method of Characteristics to design supersonic nozzle contours for isentropic, inviscid, irrotational ...

Search SUST


Browse

My Account