- SUST Home
- →
- Graduation Projects
- →
- Bachelor
- →
- Bachelor of Petroleum Engineering & Technology
- →
- Browsing Bachelor of Petroleum Engineering & Technology by Title
JavaScript is disabled for your browser. Some features of this site may not work without it.
Browsing Bachelor of Petroleum Engineering & Technology by Title
Now showing items 1-20 of 185
-
(Sudan University of Science & Technology, 2022-02-01)LPG is one of the top products in refineries contains impurities like H2S, are very harmful due to its corrosive and toxic characteristics, use to Tertiary amines (MDEA) to removes these impurities, called LPG sweetening ...
-
(sudan university of science & technology, 2018-10-01)In this research Rock prosperities and reservoir properties collected from Sudanese fformation and analyze carried out for these data by ranging method to select the suitable formation for water flooding method, and the ...
-
(Sudan University of Science & Technology, 2016-11-01)One of the most critical limitations during horizontal drilling is torque and drag generated by the contacts between the drill string and the borehole or casing. Therefore, torque and drag analysis and calculations are ...
-
(Sudan University of Science & Technology, 2016-10-01)The study area lies in Middle Sudan and is situated in the Jazeera State. It is bounded by latitudes (14° _ 15.5 ° N) and longitudes (32° _ 33.5° E). Almost the whole area covering the Study area can be accessed through ...
-
(Sudan University of Science & Technology, 2016-10-01)This project uses pinch analysis techniques to analyze the heat transfer characteristics and efficiency of a typical heat exchanger network, used in Elobied. The heat exchanger network, consist of eight heat exchanger with ...
-
(Sudan University of Science & Technology, 2022-02-01)This project show a new opinion applied in Obeid Refinery which is addition of distillation unit contain distillation column, two heat exchanger and crude oil storage tank. this unit is added mainly to satisfy the demand ...
-
(sudan university of science & technology, 2018-10-01)The objective of this study is to define the optimum ratio of Rawat to Nile Blend feed stream to Elobied refinery.Rawat crude hasrecently been discovered in Sudan, but has a high pour point and wax content, that’s why we ...
-
(Sudan University of Science and Technology, 2017-10-08)Bottom hole assembly (BHA) is a component of a drill string that used to drill oil and gas wells. A BHA resides in the drill string above the drill bit and below the drill pipe. The primary component of the BHA is the drill ...
-
(Sudan University of Science and Technology, 2015-10-04)This research presents an analytical study of all variables that affect hydraulic fracture width calculation. The equations that govern hydraulic fracturing width were formulated. Then a program using MatLab was developed, ...
-
(sudan university of science & technology, 2018-10-01)Natural influx of water in oil reservoir surrounded by water aquifers play a very important role in increasing oil recovery. Such reservoir caused by production of hydrocarbon promotes the influx of water from surrounding ...
-
(Sudan University of Science and Technology, 2015-10)Thanking to Allh before and after..... First and foremost; the greatest thanking to our supervisor Eng. Fatima Ahmed Altiganifor her continuous support.... and for her great efforts, she was the best guide and ad ...
-
(Sudan University of Science and Technology, 2015-10)Thanking to Allh before and after..... First and foremost; the greatest thanking to our supervisor Eng. Fatima Ahmed Altiganifor her continuous support.... and for her great efforts, she was the best guide and ad ...
-
(Sudan University of Science & Technology, 2022-02-01)The study area (Jake oilfield) is located on the Western Escarpment of the Fula Subbasin of the Muglad Basin, which is bounded by the latitudes 11°20’ and 11°36′ N and longitudes 28° 30′ and 29° 36′ E. This oilfield has ...
-
(Sudan University of Science and Technology, 2015-10-05)In this project the gas lift system was applied on well (x) Block 6- Sudan by using the volumetric balanced method and by using pipe simulator, The optimum injection point was has been calculated and it was (3600ft) by ...
-
(Sudan University of Science & Technology, 2014-09-01)The most direct way of determining the rock mechanical data is from laboratory tests on plugs; wire-Line can also be used as an indicator, In order to avoid the disadvantage of the two methods calibration are required. In ...
-
(Sudan University of Science and Technology, 2015-10)Using the computer software PVTi a fluid definition was established from the PVT data obtained from the laboratory experiments, the laboratory data prepared to be a suitable input data so it can be used in PVTi. Using the ...
-
(Sudan University of Science & Technology, 2020-11-01)Chemical Enhanced Oil Recovery (cEOR) can increase the recovery factor for many oilfields. in Heglig oilfield EOR method has been investigated on several levels in order to select the best application. The screening criteria ...
-
(Sudan University of Science and Technology, 2014-09-01)EOR methods are used extensively nowadays for increasing ultimate oil recovery and the effectiveness of each method depends on the characteristics of the reservoir. The target of this study is to determine the optimum ...
-
(Sudan University of Science & Technology, 2014-09-01)In this study, since the estimation of the pressure drop in vertical wells is quite important for several practical applications, a comparative study of pressure drop models and correlations has been done by using a ...
-
(Sudan University of Science & Technology, 2022-02-01)In this study wire line logging data of exploration well Laloba AG-1 in Muglad basin were analyzed in order to discriminates between the petro-physical properties in Aradeiba & Bentiu formations and accordingly to identify ...
Now showing items 1-20 of 185
Share
