Bachelor: Recent submissions

  • محمد, امتنان; سعيد, ترتيل عباس; محمد, سارة المهدي; عبد الله, ناهد محمد الحسن (جامعة السودان للعلوم و التكنولوجيا, 2018-01-03)
    الهدف من هذه الدراسه تحليل بذور الحلبه وذلك بغرض الحصول على زيت الحلبه والتعرف على نسبة الزيت الموجوده وبعض الخواص الفيزيائيه والكيميائيه له ............
  • حسن, ابوبكر عوض عباس; أمين, احمد يحي زكريا; يوسف, محمد عبد القادر محمد; صالح, محمد عوض اله بابكر; على, محمد يوسف احمد; مشرف, -محمد يوسف خليل محمد (جامعة السودان للعلوم والتكنولوجيا, 2017-10-04)
    جريت هذه الدراسه لمعرفه أثر اضافة مستويات مختلفة من الجمض الامينى الميثونين على اداء الفراخ اللاحم وقد تمت هذه التجربه فى جامعه السودان للعلوم والتكنولوجيا بكليه الانتاج الحيوانى فى الفتره من 19 ديسمبر الى 24 يانير 2017 ...
  • عبد النور, أحمدالعبيد طلحة محمد; محمد, عبد الرحمن محمد عبد الرحمن; حامد, ميسرة محمود محمد; مشرف-, مازن شمس الدين الطاهر (جامعة السودان للعلوم والتكنولوجيا, 2017-10-01)
    نسبة للمشاكل التي تحدث لوصلات اللحام والتي تؤدي الي انهيار وتلف الوصلات وجدت الحوجه لهذا البحث حيث انة هناك الكثير من الحقائق التي يجب اخذها في الاعتبار عند الشروع في عملية اللحام وبهذا تناول انواع اللحام وعيوبها وطرق ...
  • الامين, النيل شفيق; طه, خنساء بابكر; سعيد, فاتن عمر; ضوء البيت, معن ابراهيم; مبارك, ايثار احمد; مشرف, -طارق عكير (جامعة السودان للعلوم والتكنولوجيا, 2017-10-05)
    اجريت هذه الدراسة بمزرعة كلية علوم و تكنولوجيا الَّنتاج الحيواني -جامعة السودان للعلوم والتكنولوجيا 1132 م ( في حظائر تربية الدواجن النظام شبه مغلق حيث -3- 1132 م الى 11 -31- في الفترة ) 31 تم استخدام ) 311 كتكوت( من ...
  • عبد المجيد, خالد موسي محمد; مشرف, -مناهل التجاني (جامعة السودان للعلوم والتكنولوجيا, 2017-10-03)
    أجريت الدراسة لمسح مرض الكلازار علي إنتاج الأبقار في ولاية جنوب دارفور محلية نيالا (نيالا – عد الفرسان – برام – تلس – السلام – بليل – أم ضاح ) . للتعرف علي الأبقار التي أصيبت بمرض الكلازار ومدي تأثيره علي الإنتاج ، تم ...
  • محمد, عبدالله محمد علي عبدالله; السباعي, عبدالرحمن عباس محمد; البشير, الامين يوسف احمد; مشرف-, يس محمد حمدان (جامعة السودان للعلوم والتكنولوجيا, 2017-10-01)
    هذا البحث يقدم لحل لمشكلة الماده الخام الهدرة اثناء عملية التعبئة بسبب سوء عملية التعبئة واختلاف مستوي السائل من كوب الي اخر وذلك عن طريق تنظيم العملية والتحكم فيها بواسطه نظام التحكم الالي الاردوينو.
  • مصطفى, شادي مجدي الزين; محمد, شرف الدين الفاتح دياب; محمد, محمد أحمد يوسف; مشرف-, وداعة الله الأمين (جامعة السودان للعلوم والتكنولوجيا, 2017-10-01)
    تناول البحث تطبیق الهندسة القیمیة للصناعة السودانیة وتمت الدراسة في شركة كولدیر الهندسیة . حیث هدفت الدراسة لبحث اسباب معاناة السوق السودانیة من التكالیف الباهظة والجودة المنخفضة مقارنة مع السوق العالمیة . و ذلك لعدم ...
  • Baraka, Ibrahim Osman Adam; Hassan, Ahmed Mohammed Elamin; Osman, AbdelrahimAbdelaziz; Supervisor-, AlsawiYahia (Sudan University of Science and Technology, 2017-10-01)
    Most pipeline companies have complex maintenance and repair system .good maintenance allows companies to catch small problem before they becomes large and cost. it also means that equipment runs more efficiency .operators ...
  • Abdallah, Ahmed AlsadigOamara; Ali, Abeer Saad Ahmed; Alnoor, Mehad Eissa Ebrahim; Wijam, Yousria Adam Alaga; Supervisor, -Rania Hassan Zayed (Sudan University of Science and Technology, 2017-10-04)
    This study was conducted at the College of Animal Production Science and Technology at Sudan University during the period from 19 to 25 march 2017 in investigate the the physiochemical properties of camel milk in Khartoum ...
  • Mohammed, Abdala Azrak; Altigany, Alaa Ahmed; Basher, Esraa Alnagi; hammad, Tyseer; Supervisor, -Daoud Alziber Ahammed (Sudan University of Science and Technology, 2017-10-10)
    The study was conducted at College of Animal Production Science and Technology, Sudan University of Science and Technology.The objective of this research was to design and construct a simple digester for production of ...
  • Ahmed, Abdullah Ahmed Jibreel; Mustafa, Abduallah Hashim MohaemdElahassan; Abdallah, Jafar Mohamed Jafar; Supervisor-, WidaatallahAlamin (Sudan University of Science and Technology, 2017-10-01)
    The main goal of the project is the Implementation of lean Six sigma which is a methodology aim to improve the productivity by systematically removing of waste, reduce defects and variation. The methodology is divided ...
  • Adam, Ammar Jibril; Osman, Faroog Gassim Abd Alazim; Mohammed, Mojahed Mohammed Hussien; Supervisor-, El SawI (Sudan University of Science and Technology, 2017-10-01)
    This study aimed to predict and optimize the surface roughness for work piece type (St 42crmo4) in straight turning process, the study will focus on three cutting parameters that effect on the surface roughness which ...
  • Abdo Al Salam, Fatma Mohammed; Ali, Maaza salih Yhya; Supervisor, -Ali Saad Mohammed (Sudan University of Science and Technology, 2017-10-03)
    A surveillance was carried out in Kukuzoo by examining faeucal specimens of dorcas gazelle for detection of parasitic eg. The method used direct smear. The prepared slide of the faecal specimen was mounted under microscope ...
  • Ahmed, Montaser Ali Khalifa Seed; Al-Basheer, Mohammed Alhendi Khaled; El-Haj, Mohammed Omer Ali; Supervisor-, Jaffer Abdel-Hameed (Sudan University of Science and Technology, 2017-10-01)
    This thesis focuses on design, implementation and control of six degrees of (DOF) robotic arm using servo motors to simplify the application of robotic science in CNC (computer numerical control) lap for the students of ...
  • Abuzid, Mohanad Mohammed Hassan; Hamad, Mohanad Saud Awadallah; Abdallah, Yahia Mohammed Yahia; Supervisor-, Mazin Shamseldin Altahir (Sudan University of Science and Technology, 2017-10-01)
    This study summarized in the identification of aluminum alloys in general and aluminum-copper alloys specific. And study effect of adding a pure copper to aluminum alloys. The melting process has done by using electrical ...
  • Haj Eisa, Abobaker Mohamed Ali; Abdalla, Ahmed Ibed Alla; Hussein, Mohamed Nasr Aldeen; Supervisor-, Jaffer Abdulhameed (Sudan University of Science and Technology, 2017-10-01)
    The research lowered the corrosion of a crank made of medium carbon steel by increasing surface hardness. Two samples were taken from the crank and the hardness value was 227.26 BHN. The samples was inter in the heat ...
  • Ahmed, Mohamed Sirelkhatim Awad Mohamed; Abdulrahim, Mohamed Abdulrahman Hussain; Hassan, Ayman Salah Abdulgadir; Supervisor-, Widatalla Alamin Abdalla (Sudan University of Science and Technology, 2017-10-01)
    The purpose of this project is to find the optimum practices for managing inventory, and determining the practices being followed in the Sudanese industry. In order to collect the required data to determine the inventory ...
  • Hamid, Albokhary Mohammed Taher Bashir; Ali, Almoatassem Bellah Khalaf Allah Ahmed; Ali, Masaad Shawgy Masaad; Supervisor-, Widatalla Alamin Abdalla (Sudan University of Science and Technology, 2017-10-01)
    this research explains how to implement the Preventive Maintenance Optimization (PMO( methodology as a new concept of engineering management and puts a practical picture and modern application to develop maintenance ...
  • ادم, ايمان عبدالله ابراهيم; حسين, رميثاء عثمان احمد; دنقس, سعدية زكريا بشير; علي, علا عماد عوض; ابراهيم, فاطمة عبدالكريم عبدالله; مشرف, -اسامة الشيخ يس; مشرف .م, -ابراهيم اسماعيل حامد (جامعة السودان للعلوم والتكنولوجيا, 2017-10-05)
    اجريت هذه التجربة بغرض المقارنة بين الثوم ومخلوط الثوم مع الزنجبيل والاحماض العضوية كاضافات علفية من حيث اثرها على الاداء الانتاجي والمناعة للدجاج اللاحم. استخدمت في التجربة كتاكيت لاحم عمر يوم من سلالة روص 308 وامتدت ...
  • البشير, إيناس الضو محمد; حممد, زكية أمين بلة; أحمد, منال عثمان موسى; موسي, نوران عبد الرؤوف احمد; مشرف, -إبتسام علي حسن (جامعة السودان للعلوم والتكنولوجيا, 2017-10-04)
    أجريتهذه الدراسة بغرض إجراء العد البكتيري وقيمة التزرنخ والاختبارات الحسية للسجوك البقري لثلاث عينات مختلفة النسب من حمض ألستريك احدي العينات لم يتم لها إضافة حمض ألستريك (A) وعينة ثانية تم إضافة1% من حمض ألستريك لها (B) ...

Search SUST


Browse

My Account