College of Engineering: Recent submissions

  • Effect of Using Gasoline-Jatropha Blend on Performance of Two-Stroke Combustion Engines 
    Osman, Abubker Yousif Elteyab; Supervisor, - Tag Elssir Hassan Hussan (Sudan University of Science and Technology, 2018-03-10)
    In this work, laboratory experiments were carried out at the Military University of Kerrari for a two-stroke single-cylinder engine, Specification of engine (Engine Model is Bajaj auto, Maximum Power and Maximum Torque ...
  • Interference management for Device to Device communication Underlying Cellular Networks Using DRC And FFR 
    Saeed, Haifa AbuObaida Abu AL Hassan; Supervisor, - Rashid A. Saeed (Sudan University of Science and Technology, 2017-08-10)
    D2D communication aims to improve the spectral efficiency and increases the overall system capacity. In the proposed scheme, sharing the uplink channel of a cellular system is analyzed in single cell and multi cell. In ...
  • COMPUTATION OF OIL WELLS ELEVATION POINTS USING DIGITAL ELEVATION MODELS 
    Omer, Mohamed Ajeeb Suliman; Supervisor, - MohamedElamein Ahmed (Sudan University of Science and Technology, 2017-12-10)
    The elevations of points considered as one of the most important element of the site of oil wells. The importance of knowing the elevations of points appear in determination of depth during drilling of wells to ensure the ...
  • Evaluation of Noise and Vibration in Boilers at High Loads 
    Elimam, Balla Mohamed Ahmed; Supervisor, - Hassan A/Latif Osman (Sudan University of Science and Technology, 2018-03-10)
    Various components inside the boiler are required to promote efficient combustion and heat transfer. Their design depends on factors such as the type of fuel and the method selected to transfer thermal energy. The maximum ...
  • Analysis, Performance and Optimization of Perforated and Non-Perforated Fins under Forced Convection 
    Al Taha, Wadhah Hussein Abdul Razzaq; Supervisor, - Hassan Abdellatif Osman; Co-Supervisor, - Majid Hameed Majeed (Sudan University of Science and Technology, 2018-03-10)
    This work investigates a technique to improve extended surface heat transfer through the use of perforation geometric patterns. When perforation geometries are considered, significant gains in the available surface area ...
  • THE EFFECTS AND CAUSES OF BOILER TUBES FAILURES ON EFFICIENCY OF POWER PLANT 
    Badr, Abualgasem Adam Zrgan; Supervisor, - A.A.A.Abuelnuor (Sudan University of Science and Technology, 2018-02-10)
    In this study the failure of the boiler tubes of the (KNPS, 6x380MW) investigated, also analysis the effects of boiler tube failure on efficiency of (KNPS). The experimental methods used to test and analysis of boiler ...
  • Design of Anti Drift System for Belt Conveyer in Industrial Field 
    Jafer, Muhy eldeen Mohammad Ataelfdeel; Supervisor, - Mustafa Osman Ali (Sudan University of Science and Technology, 2017-07-10)
    An industrial material transportation takes high priority and any disturbance can affect the process, the belt conveyer system considers as the main element in the transportation system. Unfortunately, sometimes even the ...
  • العوامل المؤثرة علي عطاءات مشروعات التشييد في السودان 
    علي, سلمي محمد حسب الله; مشرف, - صلاح الدين عبدالعزيز عجبان (جامعة السودان للعلوم والتكنولوجيا, 2018-01-10)
    نبعت فكرة البحث من خلال ممارسة عملية العطاءات والعوامل المؤثرة عليها في صناعة التشييد .حيث تناول هذا البحث تعريف العطاءات وانواعها والمستندات التي تحتوي عليها وكيفية تسعير العطاء وفرزه واسناده الي المقاول المناسب ...
  • The Impact of Organizational Culture on Managerial Creativity in Construction Companies in Sudan 
    Mustafa, Alaa Abdulla; Supervisor, - AwadSaadHassan (Sudan University of Science and Technology, 2018-01-10)
    The organizational culture has become a key driver for the development of organizations and their performance. Their effective role in promoting the capabilities and abilities of the staff of these organizations depends ...
  • Energy and Exergy Analysis for Garri(4) Thermal Power Plant 
    ELFAKI, MAWIA OMER MOHAMMED; Supervisor, - A. A. A. Abuelnour (Sudan University of Science and Technology, 2017-02-10)
    In recent years the entire world is awarring about energy resources limitation, specifically sudan country confronts critical crises in fossil fuel resources and yet more of electricity energy producing from fired thermal ...
  • A Model to Assess and control the Impact of Variation Orders on Time and Cost in Building Projects in Khartoum State 
    Elshaikh, Eltahir Abu Elgassim Mohamed; Supervisor, - Awad Saad Hassan Co Supervisor - Salma Yahia Mohamed (Sudan University of Science and Technology, 2018-03-10)
    Variation orders (VOs) are one of the main challenges that face all building projects stakeholders. From some preliminary investigation conducted with some construction managers in Sudan, VOs were viewed as the main ...
  • WIRELESS MONITORING AND CONTROL OF TRANSFORMER USING MICROCONTROLLER 
    ATEEM, WEGDAN HAMID ZAKARIA; ISMAIL, AWADALLA TAIFOUR ALI (Sudan University of Science and Technology, 2018-02-10)
    Transformers are basic design of electrical device which provide power transmission by transforming induced current from one circuit to another. The induced current can be converted step up or step down of current or ...
  • AUTOMATIC TUNING OF PARAMETERS CONTROLLER USING ARTIFICIAL NEURAL NETWORKS 
    Almubark, Hajer Khadir Ahmed; Supervisor, - Awadalla Taifour Ali Ismail (Sudan University of Science and Technology, 2018-02-10)
    proportional, integral and derivative (PID) controllers have become the most popular control strategy in industrial processes due to the versatility and tunning capabilities. The incorporation of auto-tunning tools have ...
  • GAS TURBINE SPEED CONTROL USING FUZZY LOGIC 
    Ahmed, Fatima Hassan Abdelrahman; Supervisor, - Awadalla Taifour Ali Ismail (Sudan University of Science and Technology, 2018-02-10)
    Power generation by means of gas turbine power plants is playing a major role worldwide. Wide spread application of a gas turbine in electricity generation and the dynamic nature of this system has doubled the necessity ...
  • RISK MANAGEMENT IN THE PRE-IMPLEMENTATION STAGE IN THE CONSTRUCTION INDUSTRY IN SUDAN 
    NOUR, ALAA OMER MOHAMED MOHAMED; Supervisor, - SALAH ELDIN ABDELAZIZ AJBAN (Sudan University of Science and Technology, 2018-01-10)
    The risk in construction industry is a global phenomenon and construction industry in Sudan is not an exception. Generally, many factors affect construction industry and it is very important to manage these factors to ...
  • Producing Of 60mm Rocket by Using the Ductile Cast Iron Instead Of Gray Cast Iron 
    Gobara, Omer Abdelgadir Omer; Supervisor, - Yassin Mohammed Hamdan (Sudan University of Science and Technology, 2018-01-10)
    The purpose of this research was to implement a change in the material of a 60 mm mortar rocket from grey cast iron to ductile cast iron. Grey cast iron was the typical material used in the manufacturing of the 60 mm mortar ...
  • Detection of Irregularities in Residential Areas using Remote Sensing and Geographical Information Systems 
    Ahmed, Eihab Salah Abdallah; Supervisor, - Abdel Rahim El Hag Abdel Aziz (Sudan University of Science and Technology, 2018-02-10)
    Urban development is the future vision for urban and transportation development to face economic, demographic and environmental challenges that needed. The control of urban planning is one of the main tasks under taken ...
  • Economic Load Dispatch Using the Conventional and Intelligent Methods 
    Hamedow, Ghabsha Adam Ali; Supervisor, - Alfadil Zakaria yahia (Sudan University of Science and Technology, 2017-11-10)
    This thesis introduces the importance of economic dispatch in a power system. Economic dispatch was the method use in allocate the output power of each generator in order to achieve the optimal dispatch to reduce fuel cost ...
  • Detection of Changes In Nubian Lake Using GIS and Remote Sensing 
    Abdelrahman, Lina Mohammed; Supervisor, - Abdel Rahim El Hag Abdel Aziz (Sudan University of Science and Technology, 2018-02-10)
    The Nubian lake is one of the largest industrial lakes resulting from the establishment of High Dam in Egypt and is located in the Sudanese-Egyptian border. This research deals with the study of changes in Nubian Lake using ...
  • Classification system for heart sounds based on Random Forests 
    Mohammed, DoaaHayder Ahmed; Supervisor, - Mohammed Yagoub (Sudan University of Science and Technology, 2018-02-10)
    In the last century, cardiovascular illnesses are the first death cause in developed countries. For this reason, many efforts have been made in order to develop sophisticated techniques for the early diagnoses of cardiac ...

Search SUST


Browse

My Account