College of Engineering: Recent submissions

  • A Study of Optical and Thermal Effectsof Gold Nanoparticles 
    Mohamed, Alsaida Fatima Abd Alati; Supervisor, - Fragoon Mohammed Ahmed (Sudan University of Science and Technology, 2018-01-10)
    The interaction between nanoparticles and radiation holds great interest in Nano medicine. Hyperthermia by laser has been considered as safe cancer treatments methods with lower harmful effects on normal tissues. Using ...
  • Safety and Effectiveness of Laser in Cancer Treatment 
    Balila, Omaisa Omran; Supervisor, - Fragoon Ahmed (Sudan University of Science and Technology, 2017-06-10)
    The research is a comparative study of therapeutic properties of light (Laser) in cancer treatment, it was only in the last century that photodynamic therapy (PDT) was developed. At present, PDT is being tested in the ...
  • Dual Axis Sun Tracking System Using a Microcontroller and a Stepper Motor 
    Ahmed, Hossam Algamar Mohamed; Supervisor, - Elfadil Zakaria Yahia Abdalla (Sudan University of Science and Technology, 2018-01-10)
    This study pursuit develop solar energy systems in the light of technological advances to develop these systems, especially those moving (solar Tracking) to take advantage of sunlight for a longer period. The Objective ...
  • Energy and Exergy Analysis of Boiler in Khartoum North Thermal Power Plant 
    Sliman, Musab Mudethir Hassn; Supervisor, - A. A. A.Abuelnuor (Sudan University of Science and Technology, 2018-02-10)
    Energy is an important part of most aspects of daily life. Electrical power generation is an important factor for development of people. The generation of electricity in Sudan depends on the thermal generation plants and ...
  • THE STRUCTURAL PERFORMANCE OF R.C BOX CULVERTS ACCORDING TO AASHTO SPECIFICATIONS USING COMPUTER PROGRAM SAP 2000 
    YOUSIF, IBRAHIM MOHAMED IBRAHIM; Supervisor, - ABUSAMRA AWAD ATTAELMANAN (Sudan University of Science and Technology, 2017-12-10)
    In this research, three configurations of box culverts were considered to study the structural performance of each one by using structural analysis program SAP 2000. The discharge was calculated from a hydrological study ...
  • Modeling of Linear Induction Motor and Dynamic Response Analysis and Improvement Using PI controller 
    Altahir, Mubarak Mohamed Mohamed-Alhasan; Supervisor, - Giddani Osman Adlan (Sudan University of Science and Technology, 2017-11-10)
    Linear induction motor is a special purpose motor with enhanced versatility of operation compared to rotary induction motor. In This thesis a simulation model for the linear induction machine as an electromechanical system ...
  • Predicting Compressive Strength of High Strength Concrete Using Artificial Neural Networks 
    Gaily, Ahmed Mohammed; Supervisor, - Mahmoud Ahmad Mohammed Khogali (Sudan University of Science and Technology, 2017-08-10)
    The advancement of materials technology has led to production of higher grades of concrete strength. The application of High Strength Concrete “HSC” in civil engineering structures has increased significantly. The principal ...
  • Design and Implementation of Gearbox Test Rigfor Heavy Vehicles 
    Younis, Yasir Hussein; Supervisor, - Abdalfatah Belal (Sudan University of Science and Technology, 2017-10-21)
    During repairing and troubleshooting gearboxes, a way to check and inspect its performance before and after repairs isneeded. However, while the engine tester (Dynamometers) are very generic and common and does not need ...
  • Design of Interactive cane for blind Using Microcontroller 
    Abdelrahman, Nafisa Bahaeldin; Supervisor, - Mohammed Yagoub Esmail (Sudan University of Science and Technology, 2017-12-10)
    Blind people daily encounter many difficulties such as walking on the road, finding right path. In this project the interactive cane comes as a solution to enable them to identify the world around by integrate the traditional ...
  • Control of Industrial Gas Turbine Speed 
    Mohamed, Fatima Mohamed Alameen; Supervisor, - Awadalla Taifour Ali Ismail (Sudan University of Science and Technology, 2017-12-10)
    In this study, speed control system has been designed for the heavy-duty gas turbine. The speed control includes three control loops: acceleration control - speed control -temperature control. Acceleration control determines ...
  • Performance Comparison between IP Routing and Onion Routing 
    Mohamed, Fawaz Fathi Taha; Supervisor, - Ahmed AbdAllah (Sudan University of Science and Technology, 2017-12-10)
    The world is suffering from many political sanctions imposed by governments on their other counterparts to include the general public without exception. Among these sanctions is the practice of some countries to ...
  • A Comparative Study Between Three Different Adjustment Techniques as Applied to Part of the Old Sudanese Triangulation Networks 
    Osman, Ahmed Elzein Eltaj; Supervisor, - Khalaf Alla Mohmed Badi (Sudan University of Science and Technology, 2017-12-10)
    Triangulation in survey is the process of determining the control points by measuring angles and distances. The adjustment process of triangulating a network can be carried out by many methods, one of these methods is ...
  • Pump inspection Using Vibration Measurements and analysis 
    Malik, Elfatih Hassan Mohammed; Supervisor, - Elssir HassanHussan Ali (Sudan University of Science and Technology, 2017-11-10)
    In Khartoum Refinery Company (KRC) Pump 1104B suffers of high vibration level. Many corrections had been done to find out the problem but failed. Vibration analysis techniques is used to find out the root causes of the ...
  • Mitigation of Harmonics Effects on Power Quality 
    SALIH, KHIDIR FAISAL ADAMALDEAN; Supervisor, - ZAKARIA ANWAR ZAKARIA (Sudan University of Science and Technology, 2017-04-10)
    This thesis presents the definitions of harmonics, generation, causes, and solutions due to IEEE 519 standard of harmonics. The basic aim of the study is how to mitigate the Harmonics effect on power quality. The Harmonics ...
  • تطبيق تقنية المعلومات وأثرها في صناعة التشييد في السودان 
    نصر, نوره سرالختم حسن; مشرف, - عوض سعد حسن (جامعة السودان للعلوم والتكنولوجيا, 2017-05-10)
    يدرس هذا البحث تطبيق تقنية المعلومات في صناعة التشييد واثرها في السودان وكما هو معلوم ان تقنية المعلومات تساهم في تطوير صناعة التشييد بشكل خاص وكافة جوانب الحياة بشكل عام وقد ساهمت ايضا في زيادة الجودة وتقليل الزمن المهدر ...
  • Design and Simulation Analysis of Piezoresistive Microcantilever Beam for Glucose Sensing 
    Abdalla, Elfateh Mohammed Ebrahem; Supervisor, - Abdalfattah Bilal Abdelsalam (Sudan University of Science and Technology, 2016-03-10)
    The importance of micro biomedical instrument has been grown in high rate and faster than in previous decades. This acceleration was primary due to, the increase and demand for high quality medical care in the developed ...
  • دور التحكيم في فض المنا زعات في العقود الهندسية في السودان 
    حسن, أبو العز سعيد محمد; مشرف, - صلاح الدين عبدالعزيز عجبان (جامعة السودان للعلوم والتكنولوجيا, 2017-10-21)
    هذا البحث بعنوان دور التحكيم في فض النزاعات الناشئة عن العقود الهندسية فى السودان ، وتكتسب الدراسة أهميتها من موضوعها الذي يتعلق بوسيلة من أقدم وسائل فض المنازعات واكثرها مرونة وقابليتها لدي أطراف النزاع واسرعها في انهاء ...
  • REDUCING TRANSMISSION LOSSES BY USING STATIC VAR COMPENSATOR (SVC). 
    Ahmed, Omer Abdelrahman Mohammed; Supervisor, - Alfadil Zakaria Yahia (Sudan University of Science and Technology, 2017-11-10)
    The fast growing of cities and population led the industrial section to grow as well, in addition to the domestic loads, this rapid increase in load demand forces power systems to operate under heavily stressed ...
  • On Line Monitoring for High Voltage Power Transformer Bushing 
    Suliman, Osama Abdelwahab Abdelrahman; Supervisor, - Alla Edeen Awouda (Sudan University of Science and Technology, 2017-09-10)
    Power transformers are essential parts of our electric power infrastructure, and transformer components such as bushings and tap changers are essential parts of transformers, ensuring they operate reliably and safely while ...
  • Short Term Electrical Load Forecasting Using Time Series 
    Mohammed, Salma Yousif; Supervisor, - Mohamed Osman Hassan (Sudan University of Science and Technology, 2017-10-10)
    Electric load forecasting plays an important role in the planning and operation of the power system. Precise load forecasting helps the electric utility to make unit commitment decisions, reduces spinning reserve capacity ...

Share

Search SUST


Browse

My Account