College of Engineering: Recent submissions

  • تطبيق إعاده هندسة العمليات علي الموارد البشرية في شركات التشييد بولاية الخرطوم 
    الحاج, سهي عبدالعزيز احمد; مشرف, - ابراهيم محمد أحمد (جامعة السودان للعلوم والتكنولوجيا, 2018-02-10)
    هدفت هذة الدراسة الي التعرف على اعادة هندسة العمليات على الموارد البشرية في شركات التشيد بولاية الخرطوم لتساهم في فهم التفسير واعادة هندسة الموارد البشرية لتحسين الاداء الكلي في المؤسسات
  • Technology management program – as part of hospitals strategic planning 
    Ahmed, Salma Ahmed Sheikh Hassan; Supervisor, - Fragoon M. Ahmed (Sudan University of Science and Technology, 2016-05-10)
    Technology including medical devices represents an essential investment in healthcare facilities; technology management therefore is a milestone in healthcare strategic planning, this research aimed to highlight the ...
  • Computerized Maintenance Management System Design 
    Ahmed, Hagir Mohamed Ahmed Gaafar; Supervisor, - Mohamed yagoup (Sudan University of Science and Technology, 2018-02-10)
    The safety and reliability of medical equipment is mandatory. The effective maintenance management of medical technology influences the quality of care delivered and the profitability of healthcare facilities. Equipment ...
  • A Design of Downstream Gate Controller for the Pump Turbine in Khashm-Algirba Dam Power Station 
    Mohammed, Mohammed Abdalgadir Jumaa; Supervisor, -Ali Mohammed Hamdan Adam (جامعة السودان للعلوم والتكنولوجيا, 2018-05-15)
    In this research a study on the pump turbine was conducted and found that in case the hydraulic system failure to close the wicket gate and runner blade of the pump turbine the speed of the pump turbine will increase and ...
  • QoS Measurement for Real-Time Voice Traffic Over IPv4 and IPv6 
    Mohamed, Hiba Hamed Ali; Supervisor, -Ahmed Abdalla (Sudan University of Science and Technology, 2018-05)
    Real time applications over IP network became widely used in different fields; video conference, online educational lectures, online call, online games and IP-TV. The purpose of this study is to examine and analyze the ...
  • Optimizing Pigging Frequency For Dewaxing Of Crude Oil Pipelines 
    Ahmed, Waleed Abdalla Fadlelmoula; Supervisor, -Mohammed Altayeb Mansour (Sudan University of Science and Technology, 2018-07-18)
    Wax deposition is a frequently encountered issue during the transportation of waxy crude oils. The wax deposit can reduce the effective area for oil flow. If not handled properly, the wax deposit can be too thick and ...
  • Investigation Of Oil Water Concurrent Flow In Horizontal Pipelines 
    Mohamad, Abu Bakr Abdul Bagi Abul Gasim; Supervisor, -Mohammed Eltayeb Mansoure (Sudan University of Science and Technology, 2018-07-23)
    Pressure loss in an oil water concurrent flow in pipelines represents a big challenge in the design and operation of crude oil pipelines. Pumping capacity and pipeline operation cost is directly affected by the ...
  • Detection of lung cancer Using Artificial Neural Networks 
    Ahmed, Salma Yousif; Supervisor, -Eltahir Mohamed Hussein (Sudan University of Science and Technology, 2018-01-24)
    Lung cancer is considered to be the main cause of cancer death worldwide, and in its early stages it is difficult to detect because only in the advanced stage symptoms appear causing the mortality rate to be the highest ...
  • Performance Evaluation of Carrier Aggregation in Long Term Evolution-Advanced 
    Ahmed, Wala Khalifa Mohamed; Supervisor, -Fath Elrahman Ismael Khalifa Ahmed (Sudan University of Science and Technology, 2018-06-04)
    Carrier aggregation is one of the promising features that enables expanding the bandwidth of the Long Term Evolution-Advanced (LTE-A) system through aggregating multiple LTE component carriers (CCs) of the same or different ...
  • Design and Implementation of an Internet-based Remote Controlled Temperature Controller 
    KHALAFALLA, SALMA HISHAM BABIKER; Supervisor, -DR.FATH ELRAHMAN ISMAEL KHALIFA (Sudan University of Science and Technology, 2018-06-04)
    The Internet is a telecommunications network for connecting a computer to any other computer anywhere in the world. It's approximately available in anywhere, so its accessibility is high and it's suitable to link industrial ...
  • Detection of Network Threats Using Software Defined Networks 
    Abdallah, Roua Yousif Farah; Supervisor, -Fath Elrahman Ismael Khalifa (Sudan University of Science and Technology, 2017-11-27)
    Security is one of the major topics in networking. Nowadays, most companies and organizations spend lots of money on expensive firewalls to enforce security. Software-Defined Networking (SDN) is a new promising technology ...
  • Arduino Universal Serial Bus (USB) Interfacing with MATLAB Control Toolbox 
    Mohammed, Rufaidah Abdallah Ibrahim; Supervisor, -Awadalla Taifour Ali Ismail (Sudan University of Science and Technology, 2018-07-05)
    Nowadays, the Arduino are widely used in daily applications because it is easy to be deal with. Besides, MATLAB software tool is proper tool be used as interface with hardware such as Arduino. The main aim of this research ...
  • Study of Transmission Line Protection between Alshugura and Local Market Substations 
    Suliman, Mohammed Eljack Ibrahim; Supervisor, - Elfadil Zakaria Yahia (Sudan University of Science & Technology, 2018-03-01)
    Power system protection basic requirements are Selectivity, Stability, Speed, Sensitivity, Reliability, Economy and Adequateness. Protect transmission line with distance protection scheme sometimes suffers from overreach ...
  • CHALLENGES CONFRONTING CONSTRUCTION CONTRACT ADMINISITRATION IN SUDAN 
    MOHAMMED, ESRAA ALWASILA HAMID; Supervisor, - SALAH ALDEEN AGABAN (Sudan University of Science and Technology, 2017-11-10)
    This research addressed the challenges confronting construction contract administration in Sudan, the purpose of the research is to enhance the concept of construction contract administration, its importance and the role ...
  • Design and Analysis of a Microsatellite Structure in lowearth Orbit 
    Abdelsalam, Ahmed Taha; Supervisor, - Hassan Osman Ali (Sudan University of Science and Technology, 2018-06-10)
    aerospace is one of the most developed science all over the world and it is not exclusive to the developed countries. In a country like Sudan with extended boundaries, huge internal resources never profiteered from this ...
  • Development and Application of Microsoft Excel VBA A Computer programme for Structural Design of Concrete Footings 
    Salih, Akrm Mohammed khier Abd Alla Mohammed; Supervisor, - Abusamra Awad Attaelmanan (Sudan University of Science and Technology, 2018-02-10)
    Most structural engineers use Microsoft (MS) Excel in their work as a daily basis, this presentation will illustrate some more unique ways in which Excel can be used as a very powerful tool in structural design. The tools ...
  • Design of Security System for Remotely Installing Solar Panels 
    Ramadan, Randa Siddig; Supervisor, - Hisham Ahmed (Sudan University of Science and Technology, 2018-03-10)
    Solar pumping systems are specially designed to maintain constant water supplies for the population, animals and irrigation in remote areas where there’s no electricity. Solar panels theft has been a persisting problem ...
  • Improvement of Asphalt and HMA Properties and Characteristics by Using Additives 
    Mohammed, Mohammed Abdalla Mustafa; Supervisor, - Galal A. Ali (Sudan University of Science and Technology, 2018-05-10)
    Highways pavements in Sudan are exposed to rutting and humidity making it susceptible to pavement destruction for being exposed to heavy loads on the roads. Scientists and Engineers are constantly trying to improve performance ...
  • The Structural Behavior of Rectangular and Circular Elevated Water Tanks Using Computer Soft- Wares 
    GIBRIL, AHMED MAHGOUB EISSA; Supervisor, - ABUSAMRA AWAD ATTALEMANAN (Sudan University of Science and Technology, 2018-03-10)
    In this research, three configurations of water tanks were taken to study structure behavior by using structure analysis programs for different loads cases (dead loads, lives load, wind loads and their combinations). The ...
  • Design of Emergency and Trauma Hospital from a biomedical engineer perspective 
    Ahmed, Samar Elhadi Emam; Supervisor, - Elias Sidieg Mohamed (Sudan University of Science and Technology, 2018-04-10)
    This project is Design of a hospital for emergency and trauma services in order to improve the healthcare services and to eliminate the emergency department deficiency . The design depend on the interviews and visits held ...

Search SUST


Browse

My Account