College of Engineering: Recent submissions

  • Designing a Model of Control System for F-800 Mud Pump Unit 
    Elzaki, Ahmed Abdulmuttalib Osman; Supervisor, - Mohammed Elnour Abdalla (Sudan University of Science and Technology, 2018-07-10)
    Increasing the productivity of any unit required a continuous improvement for that unit. For that purpose the study is concentrated on improvement the control system of mud pump unit which is the main oil transfer pump in ...
  • Assessment and Upgrading of Temporary Bridges in Upper Atbara and Setit 
    Ahmed, Hatim Mohammed; Supervisor, - Abusamra Awad Atta El manan (Sudan University of Science and Technology, 2018-08-10)
  • Modeling of Planetary Radar for Ranging Near-Earth Asteroids 
    ALI, ROMISAA ALI MOUHAMED; Supervisor, - Ibrahim Khidr (Sudan University of Science and Technology, 2018-03-10)
    During the last years, hazards of asteroids and other smaller bodies belt located between Mars and Jupiter orbits have dramatically increased. That is an average range from the Sun between 2.2 and 3.2 AU, astronomical unit. ...
  • LTE Quality Enhancement using Beam forming Fractional Frequency Reuse Techniques 
    Gotar, Nahla Abdelrahman Abdulla; Supervisor, - Ibrahim Khider Altaher (Sudan University of Science and Technology, 2018-04-10)
    A Long Term Evolution (LTE) technology is the most possible candidate for next generation mobile wireless communications. One impairment of LTE is an interference from neighboring cells, so called Inter-Cell Interference ...
  • Design and Implementation of Printed Circuit Board Computer Numerical Control Machine with Path Planning Algorithm 
    BALLA, MUSTAFA ELZAIN HAMAD; Supervisor, - OMER ABDEL RAZAG SHARIF ABUBAKE (Sudan University of Science and Technology, 2018-06-21)
    A Printed Circuit Board (PCB) Mill is a device that etches out a pattern on a copper clad board such that it makes a PCB. PCBs are used everywhere in the field of electrical engineering to connect electrical components to ...
  • THE STUDY OF STRUCTURAL BEHAVIOR OF BRACED CONCRTE TALL BUILDING FRAMES 
    EL-Mubarak, Suhad Abbashar Osman; Supervisor, - Abusamra Awad Attaelmanan (Sudan University of Science and Technology, 2017-10-25)
    In this study and according to European Specifications for Structural Concrete Buildings Standard in which the effect of the wind loads was applied on concrete tall building designed frames depending on the location and ...
  • Application of Management Information System in construction projects in Sudan 
    Hassan, Hassan Abdallah; Supervisor, - Salaheldin Abdelaziz Ajban (Sudan University of Science and Technology, 2017-10-25)
    Management information systems encompass a broad and complex topic. To make this topic more manageable, boundaries will be defined. Because of the vast number of activities relating to management information systems, a ...
  • Design of Car’s Security System Using Fingerprint and Arduino GSM Module 
    Mutwaly, Elham Yahia Hassan; Supervisor, - Alaa Eldein Awooda (Sudan University of Science and Technology, 2018-08-11)
    The main purpose of this project is to design and implement high security system of car. Security is a prime concern in our day-to-day life. it has been playing a key role in our places like offices, institutions, libraries, ...
  • An Embedded Remote Monitoring System for Cathodic Protection 
    Alhaj, Ehab Ali Hassan; Supervisor, - Omer Abdel Razag Sharif Abubaker (Sudan University of Science and Technology, 2018-08-10)
    The cathodic protection remote monitoring system is a circuit senses the measured voltage used to protect metallic structures against corrosion and display it locally at the field and then transfers it to monitoring room. ...
  • Improving the accuracy of pick and place robotic arm using PID controller 
    Ahmed, Eslam Haroon; Supervisor, - Alaa Eldein Awooda (Sudan University of Science & Technology, 2018-07-01)
    The industry is moving from current state of automation to Robotization, to increase productivity and to deliver uniform quality. One type of robot commonly used in industry is a robotic manipulator or simply a robotic ...
  • Scheduling Algorithm for Grid Computing using Shortest Job First with Time Quantum 
    Yosuf, Raham Hashim; Supervisor, - Rania A. Mokhtar (Sudan University of Science and Technology, 2017-11-10)
    One motivation of grid computing is to aggregate the power of widely distributed resources and provide non trivial services to users. To achieve this goal an efficient grid scheduling system is an essential part of the ...
  • Internet Protocol version 6 on virtual private Network provider edge routers 
    ABU AOUF, SAMAH KHATMI MOHAMED; Supervisor, - AHMED ABDALLAH (Sudan University of Science and Technology, 2018-08-10)
    The Internet protocols that is predominantly deployed and extensively used throughout the world. IPv6 is an IP protocol designed to replace IPv4. IPv6 quadruples the number of network address bits from 32 bits (in IPv4) ...
  • Designing a Computerized Medical Equipment Management System for Medical Equipment 
    Khalifa, Alaa Yahia; Supervisor, - Zienab Adam (Sudan University of Science and Technology, 2018-07-10)
    A well designed and properly implemented Medical equipment management system can help not only managing the financial resources but also improves the quality of life. The thesis evaluated the existing medical equipment ...
  • Predictive Maintenance by Using Ultrasound Technique for Rotating Equipments in Thermal Power Plants 
    Mohammed, Mohammed Hussien Abd Alla; Supervisor, - Tawfeeg Ahmed Gamal Aldeen (Sudan University of Science and Technology, 2018-05-10)
    This thesis proposes an ultrasound condition monitoring technique to determine the condition of rotating equipments and deals with detection of fault conditions based on measurements of ultrasound made on rotating machines ...
  • Performance Analysis for Kaplan Hydraulic Turbines in Jebel Aulia Dam 
    Mohammed, Akram Mekki Esmaeil; Supervisor, - Mohyedin Ahmed Abdelgadir (Sudan University of Science and Technology, 2018-08-10)
    Kaplan Hydraulic Turbines defined as prime movers that transform the kinetic energy for the flow rate of water and head to mechanical energy and electrical energy by electric generator shaft. And knowing the efficiency of ...
  • The Cavitation Effect in Centrifugal Pumps 
    Elshich, Al Hadi Emam Abdalla; Supervisor, - Mohyedin Ahmed Abdelghadir (Sudan University of Science and Technology, 2018-08-10)
    Cavitation in a centrifugal pump has a significant effect on pump performance. Cavitation degrades the performance of a pump, resulting in a fluctuating flow rate and discharge pressure, that reduces pumps efficiency and ...
  • An Intrusion Detection System Using Artificial Neural Network Based on Intrusion Behavior 
    OSMAN, ZAHRAA MOHAMMED ADAM; Supervisor, - FATH ELRAHMAN ISMEAL KHALIFA (Sudan University of Science and Technology, 2018-03-10)
    Over the past several years, the Internet environment has become more complex and untrusted. Enterprise networked systems are inevitably exposed to the increasing threats posed by hackers as well as malicious users internal ...
  • Evaluation of the factors affecting safety performance on Construction Project 
    Ali, Hamid Ahmed Osman; Supervisor, - Osama Mohammed Ahmed (Sudan University of Science and Technology, 2018-08-10)
    Safety in the construction project has always been a major issue. Wherever reliable records are available, construction is found to be one of the most dangerous on safety and health criteria, particularly in developing ...
  • تطبيق إعاده هندسة العمليات علي الموارد البشرية في شركات التشييد بولاية الخرطوم 
    الحاج, سهي عبدالعزيز احمد; مشرف, - ابراهيم محمد أحمد (جامعة السودان للعلوم والتكنولوجيا, 2018-02-10)
    هدفت هذة الدراسة الي التعرف على اعادة هندسة العمليات على الموارد البشرية في شركات التشيد بولاية الخرطوم لتساهم في فهم التفسير واعادة هندسة الموارد البشرية لتحسين الاداء الكلي في المؤسسات
  • Technology management program – as part of hospitals strategic planning 
    Ahmed, Salma Ahmed Sheikh Hassan; Supervisor, - Fragoon M. Ahmed (Sudan University of Science and Technology, 2016-05-10)
    Technology including medical devices represents an essential investment in healthcare facilities; technology management therefore is a milestone in healthcare strategic planning, this research aimed to highlight the ...

Share

Search SUST


Browse

My Account