College of Engineering: Recent submissions

  • Optimum Thermal Insulation Thickness for Building in Different Climatic Regions in Sudan 
    Abdelgadir, Eltahir Khalid Mohammed; Supervisor, - Ali Mohammed Hamdan Adam; Co-supervisor, - Obai Younis Taha Elamin (Sudan University of Science and Technology, 2018-05-10)
    The optimum thermal insulation thickness for buildings under Sudan climate regions was studied. Energy consumption especially of the building sector, are an important part of the total energy consumption in Sudan. The ...
  • التطوير العقاري ومواد البناء المستخدمة في ولاية الخرطوم 
    علي, وجدان عبدالرحمن; مشرف, - منى ادم شرتاي (جامعة السودان للعلوم والتكنولوجيا, 2018-07-10)
    إن التطوير العقاري في هذة الفترة اصبح من المرتكذات المهمة التي تدل على تقدم الدول والزدهارها حيث ان السودان في الفترة الاخيرة اصبح يهتم بهذا المجال اهتماما متعاظما وسننت له قوانين ولوائح وصندوق خاص ...
  • Transient Authentication Using Mobile Security Token 
    Salih, Hassan Abdullahi; Supervisor, - Rania Abdelhameed (Sudan University of Science and Technology, 2017-11-10)
    Implementing strong, fast and friendly authentication scheme is very important for securing devices (mainly mobile devices) and information systems. There is inversive proportion between usability and security. Designing ...
  • Improvement of Sudanese National Electric Grid Performance Using Modern Reactive Power Compensators 
    Suliman, Hazim Mutasim Elhadi; Supervisor, - Abdelaziz Yousif Mohamed Abbas (Sudan University of Science and Technology, 2018-03-10)
    Power systems suffer greatly from voltage instability especially due to excessive consumption or injection of reactive power by the system elements and the consumers ‘loads. The voltage instability caused by the variation ...
  • Analysis and Design of Silos Using Finite Elements 
    Mansour, Islam Salih Hussein; Supervisor, - Abdelrahman Elzubeir Mohamed (Sudan University of Science and Technology, 2018-07-10)
    This research looks into the possibility of carrying out the analysis and design of reinforced concrete silos using the finite element method and SAP2000. Sean grain reinforced concrete silo was taken as case study. The ...
  • Finite Element Study of the Use of Reinforced Concrete Grids in Large Spans Slabs 
    Hasb ALLA, Tayseer Ismail; Supervisor, - Abdelrahman Elzubeir Mohamed (Sudan University of Science and Technology, 2018-07-10)
    The research reviewed the structural systems used for buildings with long spans. The use of the grid slabs for long spans was studied using the finite element method. The primary objective was to carry out a parametric ...
  • ENERGY, EXERGY ANALYSIS & IMPROVEMENT FOR BAGASSE -FIRED THERMAL POWER PLANT 
    ABDALLA, ABDALLA MOHAMED; Supervisor, - TADELSIR HASAN HASSAN (Sudan University of Science and Technology, 2018-05-10)
    Population increment, urbanization, industrializing, and technologic development globally resulted directly in increasing energy consumption. The sugar cane industries represent one of the most important economic sectors ...
  • A Study of Cavitation in Pumps and Flow Systems 
    Abdalla, Abdalla Gouda Mohammed; Supervisor, - Mohyedin Ahmed Abdelghadir (Sudan University of Science and Technology, 2018-05-10)
    Cavitation is the appearance of vapor cavities inside an initially homogeneous liquid medium, occurs in very different situations. According to the flow configuration and the physical properties of the liquid, cavitation ...
  • DEVELOPMENT ROCKET PERFORMANCE OF 107MM USING COMPOSITE PROPELLANT 
    Alnasih, Mohammed Osman Abdelrahman Osman; Supervisor, - Mohammed Altayeb Mansour (Sudan University of Science and Technology, 2018-06-10)
    The design of 107mm solid rocket motor using hydroxyl-telechelic polybutadiene (HTPB) propellant to improve the rocket performance of 107mm and to have a details study of the internal ballistic affecting performance ...
  • SIMULATION OF INTERNAL BALLISTIC SOLID ROCKET MOTOR 
    Mohamed, Magdi Abdelrazig Elhag; Supervisor, - Mohammed Altayeb Mansour (Sudan University of Science and Technology, 2018-05-10)
    Solid Rocket Motors (SRM) manufacturing and design were expensive. In the design to develop the solid propellant rocket motors, the use of numerical tools able to simulate, predict and reconstruct the behavior of a given ...
  • OPTIMIZATION OF SHAPED CHARGE DESIGN PARAMETERS FOR OIL WELL PERFORATION 
    Zain, Ali Mohammed Ali Mohammed; Supervisor, - Emad Eldin Elhadi Musa (Sudan University of Science and Technology, 2018-06-10)
    Shaped charge is an explosive with a hollow cavity in one end and detonator at the opposite end, it’s used to focus the energy of the detonation products at the certain point. The shaped charge jet formation depends on ...
  • Control of Nuclear Reactor Power Level 
    Hassan, Mohamed Mahmoud Eltoum; Supervisor, - Eisa Bashier Mohammed (Sudan University of Science and Technology, 2018-03-21)
    When building nuclear reactors the most important part that must be observed and verified is controlled in a nuclear reactor operation and representing the safety of nuclear plant and workers and an environmental. An ...
  • RIVER NILE STATE INTEGRATED WATER RESOURCES MANAGEMENT 
    Elzubeir, Jehan Mohamed Sharief Ahmed; Supervisor, - Abas Abd Alla Ibrahim; Co-Supervisor, - Alsadig Alhade Ahassan (Sudan University of Science and Technology, 2018-03-10)
    Water is essential for life and economic development, therefore, it need to be managed carefully and in a comprehensive way. In 2000, Global Water Partner Ship (GWP) defined Integrated Water Resources Management IWRM ...
  • Exergy Analysis of ElRoseires Dam Hydropower Plant 
    Ahmed, Khalid Ahmed Khadir; Supervisor, - A. A. A. Abuelnuor (Sudan University of Science and Technology, 2018-05-10)
    Renewable sources of electricity production have become a matter of priority in many countries around the world, one of the sustainable energy sources is hydropower energy, and it is environmentally friendly; so it should ...
  • A Study of Voltage Regulation Using STATCOM in Sudan National Grid 
    Aboush, Abuammar Abdulgadir Abdulrahman; Supervisor, - Elfadil Zakaria Yahia (Sudan University of Science and Technology, 2018-03-10)
    The static synchronous compensator (STATCOM) is one of FACTS devices which resembles in many respects a rotating synchronous condenser used for voltage regulation and reactive power compensation in this study, it was used ...
  • PRODUCTION AND CHARACTERIZATION OF HIGH STRENGTH CONCRETE FOR DAMS 
    Sed Ahmed, Zain Elabdeen; Supervisor, - Salih Elhadi Moh-Ahmed (Sudan University of Science and Technology, 2018-03-10)
    This research presents a part of an ongoing experimental laboratory investigation being carried out for production and characterization of High Strength Concrete (HSC) for the Dam Complex of Upper Atbara Project concrete ...
  • Statistical Analysis for Concrete Compressive Strength for Dam Complex of Upper Atbara – Setit Project 
    Ahmed, Mohammed Elfatih Merghani; Supervisor, - Salih Elhadi Mohamed Ahmed (Sudan University of Science and Technology, 2018-03-10)
    Concrete is considered as the single most widely used material on this era of construction development, therefore, evaluation of its quality is thought to be one of the most important topic that been studied these days. This ...
  • A Computer Programme for the Economic Evaluation for Cogeneration Applications 
    Alfadil, Mojtaba Alfadil Defa Allah; Supervisor, - Ali Mohammed Hamdan Adam (Sudan University of Science and Technology, 2018-01-10)
    This thesis intends to show the current state of Combined Heat and Power (CHP) Systems and highlights the different aspects of the technologies. The theoretical principals for planning and analysis of a CHP system are ...
  • Expert System for Diagnosis and Treatment of type ‖ Diabetes 
    HASSAN, SHADIN ZUHAIR SEDDIG; Supervisor, - ELTAHIR MOHAMED HUSSEIN (Sudan University of Science and Technology, 2017-11-10)
    Expert Systems are systems built to imitate human experts in problem solving and decision making. Medical Expert Systems are breakthrough in medicine and proved beneficial in multiple critical areas such as Intensive Care ...
  • Coexistence of Wireless Regional Area Network (802.22) and Wireless Local Area Network (802.11af) In TV White Space 
    Elsafi, Rawah Sidahmed Mohammed Salih; Supervisor, - Fath Elrahman Ismael Khalifa (Sudan University of Science and Technology, 2018-02-10)
    Trying to solve the coexistence problem between the IEEE 802.11af and IEEE 802.22 networks in the TV white space (TVWS). These two standards are heterogeneous in power level and PHY/MAC design, making their coexistence ...

Share

Search SUST


Browse

My Account