College of Engineering: Recent submissions

  • Design of Digital Circuit to control streets lightings 
    Eisa, Nagat Mohammed; Supervisor - Abdalla Salih Ali (Sudan University of Science & Technology, 2008-02-09)
    Electricity is the main source of energy; it is the backbone of any amphora structure development projects. Since the demand for Electricity is very high in Sudan compared with the capacity installed and power generated ...
  • Applications oe geographical information systems in physical planning 
    Salih, Mohammed Musa; Supervisor - Gaafar Sir Elkhatim (Sudan University of Science & Technology, 2008-08-09)
    Physical planning is defined as the art and science of ordering the use of land and the sitting of the buildings and communication routes so as to secure the maximum degree of economy, convenience, and beauty to formulate ...
  • A proposed Sudanese Design Highway Loads 
    Hafazallah, Moammer Mohammed Kheir A.; Supervisor - Ahmed Gasim M. Husain (Sudan University of Science & Technology, 2008-05-09)
    This research addresses the truck axle loads in Sudan in order to suggest design axle loads for roads and bridges in Sudan. Truck axle loads are the most critical parameter governing the design of roads and bridges. This ...
  • Performance Analysis of Hybrid Electric Vehicle Battery Charger Using Voltage Oriented Control 
    Abd Alrahman, Mohammed Hassan Ahmed; Supervisor - Nagm Eldeen Abdo Mustafa Hassanin (Sudan University of Science and Technology, 2013-04-01)
    In this research a high performance battery charger for hybrid electric vehicle is designed to charge the batteries of hybrid electric vehicles, which used fuel-powered and electricity. Three-phase boost rectifier (universal ...
  • Development and Application of Traffic Flow Models for Khartoum City 
    Hassaballa, Elbagir Eltayeb; Supervisor - Galal Abdalla Ali (Sudan University of Science and Technology, 2013-09-01)
    The goal of this research is to model traffic flow in Khartoum City using four-step model (FSM): trip generation, trip distribution, modal choice and trip assignment. In the first stage, the trip production and attraction ...
  • Performance Evolution of Vehicular Ad-hoc Network concerning data latency 
    Mohammed, Hameeda Yahia Altaher; Supervisor - Sarah Mustafa Eljack (Sudan University of Science and Technology, 2013-02-01)
    Vehicular Ad Hoc Networks (VANETs) are ad hoc networks established among vehicles that have communication facilities. Vehicles compromise network nodes by acting as source, destination and router. VANET improves road ...
  • Design & Implementation of Exhaust Gas Heat Exchanger for Sudanese Heavy Fuel Oil Heating (Furnace) 
    Rajab, Hatim Kheir Allah Marhoum; Supervisor - Uzaldin.S.Abdu Hussain (Sudan University of Science & Technology, 2008-02-09)
    Sudanese fuel oil (furnace) is used in North Khartoum Power Station for boiler firing. Sudanese fuel solidified in ambient temperature due to high wax content. Steam has been used to heat Furnace during transportation, ...
  • Integration of Direct Drive Wind Turbine Energy in National Grid Using HVDC 
    Mohamed, Amal Alnoor Ali; Supervisor - Giddani Osman Addalan (Sudan University of Science and Technology,Engineering, 2013-06-01)
    Variable speed wind turbine represent the latest development in wind turbine technology. It enables the power system operator to maximize the wind power capturing during many turbine speed. The revolution in HVDC technology ...
  • A NEW METHOD FOR DEFORMATION MONITORING USING SURVEY CONTROL NETWORKS 
    Mohammed, Mudathir Omer Ahmed; Supervisor, Ali Hasan Fagir (sudan university of science and technology, 2008-06-10)
    The use of survey control networks is one of the most important techniques applied in deformation monitoring field. The differences in coordinates of stations (displacements) obtained from least squares adjustments are ...
  • MASTER SLAVE SPEED CONTROL SYSTEM INDUCTION MOTORS 
    Alsheikh, Musab Mohammed Salih Alhassan; Supervisor - AlhassanAlsheikh (Sudan University of Science &Technology, 2013-03-01)
    Nowadays, several applications ask for some kind of synchronization between the different motors. Example because of the large output power required for the long production line, conveyor line or assembly line in the ...
  • Determination Of Pressure Distribution Around Aircraft’ Awing By Using Three Dimensional Low Order Panel Method 
    Sharfi, Omkalthom Yassen; Supervisor - Alkhawad (Sudan university Of Sciences & Technology, 2005-07-10)
    This research a low order surface singularity distribution method (panel method) was used to analysis of L39 Aircraft Wing .A computer program was built to predict the influence coefficient matrices by assuming constant ...
  • ACHIEVEMENT OF TOTAL QUALITY MANAGEMENT IN A SUDANESE CONSTRUCTION COMPANY 
    MOHAMMED, MOHAMMED EL BAKRI; Supervisor - bakri abrahim (sudan university of science and technology, 2005-01-10)
    Due to growing competition and increasing customer expectation , the focus of management moved away from simply managing processes for achieving quality to continuous improvement of processes to ensure the customer expectation ...
  • دراسة مشاكل نقل ،تفريغ ,تخزين ومناولة زيت الوقود السوداني 
    عبد البنات, ريم أحمد; مشرف - محمد أحمد عبد الباقي سراج (جامعة السودان للعلوم والتكنولوجيا, 2005-01-10)
    يهدف هذا البحث لدراسة المشاكل بمحطة الشهيد د. محمود شريف الحرارية والتي نتجت من استخدام زيت الوقود السوداني (الفيرنس) بدلاً عن زيت الوقود المستورد (Bunker C) الذي صممت عليه المحطة.نتجت هذه المشكلة من وجود نسبة عالية من ...
  • Programmable Logic Controller Application for SCADA Systems 
    Mohammed, Mudathir Ali; Supervisor - Abd Elrasool Gabbar (Sudan University of Science and Technology, 2008-02-10)
    This thesis provides an introductory technical material about SCADA systems .It addresses the basic layout of the SCADA systems and parameters for process selection. The basic building blocks of SCADA systems are dealt ...
  • PROJECT APPLICATION OF COMPUTERIZED MAINTENACE MANAGEMENT SYSTEM IN SUDAN CURRENCY PRINTING PRESS 
    Elkhedir, Tariq Abdullatif; Supervisor - Elkhawad Ali Elfaki (SUDAN UNIVERSITY OF SCIENCE AND TECHNOLOGY, 2005-09-10)
    The computer had entered in many applications in different fields. These fields are considering the most important in our life. These fields can summarize as engineering field, medicine field, and economic field. One of ...
  • Design and simulation of nano oscillators 
    sid Ahmed, Nada mohammed osman; Supervisor - Ashraf Gism el sid ahmed (sudan university of science and technology, 2008-01-10)
    In this research spin-torque nano-oscillators (STNOs) were designed by the use of simulation software and the characteristics and the different factors affecting it were investigated. STNOs that produced signals of frequencies ...
  • Producer Gas Based Absorption Cold Storage 
    Elbadawi, Hassan Ahmed Mohammed; Supervisor - Mohyedin Ahmed Abdelghadir (Sudan University of Science and Technology, 2013-03-01)
    This study is conducted to design a cold storage refrigeration cycle using a generated energy of producer gas from agricultural residues and other available trees in Sudan as prosopis juliflora to store vegetables ...
  • The problem of Step and Touch Voltages Caused by Grounding System in High Voltage Substations : Case Study Izba GIS Substation 
    Allazrag, Abdelazim Mohammed Abdelrahim; Supervisor - Giddani Osman Addalan Kalcon (Sudan University of Science and Technology, 2013-03-01)
    Step and touch voltages play an important role when designing high voltage substation. Step and touch potentials near high voltage substation due to severe ground faults present a hazard to anyone in proximity to substation ...
  • Programmable Logic Controller for Water Purification Industry 
    Duga, Sahar Abdelrahman Ahmed; Supervisor - Abderasol Alzobaidy (Sudan University of Science and Technology, 2013-08-01)
    Running water is about three-quarters of the Earth's surface, while less than 1% of this amount is considered safe to drink and need to be addressed accurate before using it safely because they contain multiple types of ...
  • Application of Programmable Logic Controller in Sugar Industry Control System 
    Abosalama, Mohammed Ragieb Mahmoud; Supervisor - Abdelrasol Elzubaidi (Sudan University of Science andTechnology, 2013-03-01)
    The sugar production operation is one of the complicated industries. Most of sugar factories in Sudan use conventional circuits to control the different process stages of sugar industry mainly relay circuits in control. ...

Search SUST


Browse

My Account