Bachelor of Petroleum Engineering & Technology: Recent submissions

  • Calculation Rheological Properties of Water Base MudUsing Marsh Funnel 
    Abdulrahman, Hisham Ahmed; Jouda, AhmedSalah; Adam, Mojahed. Ibrahim Mohammed; Mohammed, Mohammed Mirghani; Elfadil, Mohammed Osman; Supervisor - Fatima Ahmed Eltigani (Sudan University of Science and Technology, 2015-10)
    Thanking to Allh before and after..... First and foremost; the greatest thanking to our supervisor Eng. Fatima Ahmed Altiganifor her continuous support.... and for her great efforts, she was the best guide and ad ...
  • ENERGY SAVING OPPERTUNITIES IN NATURAL GAS LIQUEFACTION PROCESS 
    Elkhair, Ahmed Mohammed; Mohmmed, Abd-elelah Homaida; Mohammed, Abd-albagi Ahmed; Supervisor - Zeinab A.M.khalil (Sudan University of Science and Technology, 2015-10)
    Natural Gas (NG) is a viable energy source that is dependent on pipelines and other infrastructures to reach consumers. To overcome this problem, the gas volume needs to be reduced so that it can be transported through ...
  • INTEGRATED FORMATION EVALUATION OF ABU GABRA FORMATION OF MUGLAD BASIN USING WELL LOG DATA 
    Ali, Adnan Hamad; Hamid, Amjed Salah; Ismail, Merghni Abdul Gadir; Mohammed, Mohammed Ahmed; Babiker, Mohanned Abdul Gadir; Supervisor - Abass Musa Yagob (Sudan University of Science & Technology, 2014-09-01)
    In petroleum exploration and development, formation Evaluation is used to determine the ability of borehole to produce petroleum. Essentially, it is the process of ‘recognizing a commercial well when you drill one. ...
  • Evaluation For Aradieba Formation In Bamboo Field 
    Said Ahmed, Ahmed Ali; Noor Aldaim, Hassab Alrasool Emad; Fadol allah, Mohammed Aljiely; Alfaki, Mohammed Yousif Hassan; Supervisor - Ahmed ABdalaziz Ibrahim (Sudan University of Science and Technology, 2014-09-01)
    This research aims to evaluate the Aradeiba formation of bamboo field of .by calculating the number of physical properties of formation (porosity, permeability, saturation and pressure) These properties have been ...
  • Design of Binary Distillation Column for Benzene-Toluene mixture 
    Saeed, Aanab Ismail Mohammed; Mohammed, Fatima Mohammed Ali; Suliman, Sabreen yousif; Supervisor - Musa A. Garalnabi‬‬ (Sudan University of Science and Technology, 2014-09-01)
    This project was carried out to a design distillation column to separate a binary mixture of benzene and toluene using McCabe Thiele’s procedure, it determines the number of trays required for the desired degree of 95% ...
  • SIMULATION OF CRUDE DISTILATION UNIT (CDU) AND NEW METHOD DESIGN OF DISTILLATION TOWER USING ASPEN HYSYS : KRC CASE STUDY) 
    Mustafa, Mustafa Jamal Alden; Alnaem, Mohamed Ahmed; Ahmed, Amna Alfatih; Supervisor - Abdelgadir Bashir Banaga‬‬ (Sudan University of Science and Technology, 2014-09-01)
    This project present anew methodology to design the distillation column based on simulation of the unit using ASPEN HYSYS, the methodology consider that the Nile blend is a complex mixture so it take every two products ...
  • Simulation and analysis of cryogenic air separation process : case study Khartoum refinery company) 
    Mustafa, Adam Ahmed Abdalla; Abdalla, Alhassan Abdalrhman Hassan; Mohammed, Ehab Mustafa Abdalgader; Supervisor - Zienab Abdallah (Sudan University of Science and Technology, 2014-09-01)
    Cryogenic air separation is a process by which highly purified gases or liquids are produced. This is achieved by taking large volumes of air from the atmosphere, which is then compressed, cooled, and liquefied. Through a ...
  • Production of Methyl Tertiary Butyl Ether(MTBE)in Sudan 
    Alden, Mohammed Mubarak Sheik; Omer, Babiker Hassan; Supervisor - Isra Osman Mohammed (Sudan University of Science and Technology, 2014-09)
    Methyl tertiary butyl ether (MTBE) is primarily used in gasoline blending as an octane enhancer to improve hydrocarbon combustion efficiency. Of all the Oxygenates, MTBE is the most attractive for a variety of technical ...
  • Evaluation and Control of Evaporation Losses fromGasoline Internal Floating Roof Tanks 
    Alhaj, Mamdouh Balla Edris; Alzubair, Mohmmed Babekir Alamen; A.Gadir, Wail Mohammed Alzain; Supervisor - Sumya Abdelmoneim (Sudan University of Science and Technology, 2014-09-01)
    Gasoline is a Volatile Organic Compounds (VOCs) with different boiling point range of (30-200) ºC. The lightcompounds that have boiling point of less than 40 ºC constitute about 10V %. The objective of this study is to ...
  • Study of the Effect of Flow Improvers on the operation of Heglig-PortSudan Pipeline 
    Ahmed, Mohammed Adel Mirghani; Ahmed, Omer Musa Gad Kareem; Ibrahim, Rasheed Hamid Mohammed; Supervisor - Maysra Eissa Mohyaldinn (Sudan University of Science and Technology, 2014-09-01)
    In this research the effect of a flow improver (i.e. Pour Point Depressant) on the operation of Heglig-PortSudan Pipeline has been studied. Two types of PPD, namely PPD 25J1 and PPD 25J2, have been used with different ...
  • Exploration project for central region of Blue Nile Basin 
    Younis, Abdalaziz Babiker; Alnaim, Ahmed Seddeage; Hassan, Mustafa Abdulaziz; Alawad, Tarig Abdalrahman; Supervisor - Adil abdalmagid saad (Sudan University of Science and Technology, 2014-09-01)
    In oil industry the exploration stage (geological & geophysical) is very expensive and difficult and if we want to reduce the cost we need scientific experiences and a great exercise. The main objective of the study : 1. ...
  • Low Resistivity Pay Zones and Their Resolution Using (IP), Hadida Case Study 
    Mukhtar, Almughera Saad Alawad; Ali, Anas Ali Alhady; Yasein, Salem Yasein Mahmoud; Balmat, Yousif Omer Wakeel; Supervisor - Abbas Musa Yagoub (Sudan University of Science and Technology, 2014-09-01)
    This research presents an overview of petrophysical research and exploration achievements of low resistivity pay (LRP) zone in Hadida oil field in Block VI is located in the southwest of Sudan, in the northwest of the ...
  • Calibration of Wire-Line Mechanical Properties Using Core Measurements Results for Heglig Oilfield - Case Study 
    Elsadig, Abdallah Dauod Younis; Elfaki, Hassan Osman Ali; Ali, Hozaifa Osman Mohammed; Idress, Kamal Elden Hatim; Supervisor - Elham Mohammed Mohammed Khair (Sudan University of Science & Technology, 2014-09-01)
    The most direct way of determining the rock mechanical data is from laboratory tests on plugs; wire-Line can also be used as an indicator, In order to avoid the disadvantage of the two methods calibration are required. In ...
  • Effect of Fracture Length on Well Performance for Inverted Nine Spot Wells 
    Yagoub, Eltahir Okasha Elbukhari; Alhusain, Hala WhubAlla Algasim; Hasb Alkhalig, Mahmoud Altigani Saeed; Khair, Reham Alhaj Alshazaly Mohammed; Supervisor - Elham Mohammed Mohammed Khair (Sudan University of Science & Technology, 2014-09-01)
    Hydraulic fracturing has been used for many years to increase well productivity; and injectivity for many years. This study using reservoir simulation combined with the fracture models, 3D reservoir simulation program ...
  • Development of a computer Program to predict the Future Performance of Saturated Oil Reservoir 
    Ali, Ayman Abdulmutalib Ali Adam; Ali, Greeb Allah Elwasila Mohamed; Aldaw, Hamza Ahmed Mohamed; Ali, Jawhar Abdegadir Mohamed; Supervisor - Tagwa Ahmed Musa (Sudan University of Science & Technology, 2014-09-01)
    In this research a computer program has been designed to forecast the future performance of saturated oil reservoir with depletion drive by using MATLAB based on Tracy’s method. The program is easy to work, fast, accurate, ...
  • A Comparative Study among Empirical Correlations for Pressure Drop Calculations in Vertical Wells 
    Codi, Enas Babiker Omer; Sagha, Murtada Humdan Mohammed; Ibrahim, Reda Mustafa Mohammed; Elhaj, Safia Sirag Mohammed kheir; Supervisor - Abdullah Abduljabbar M. Salih (Sudan University of Science & Technology, 2014-09-01)
    In this study, since the estimation of the pressure drop in vertical wells is quite important for several practical applications, a comparative study of pressure drop models and correlations has been done by using a ...
  • Selecting Optimum Formulation of Surfactant-Alkaline System for a Sudanese Crude Oil Experimentally 
    Balah, Ali Hassan Ali; Fadlalla, Muzamil Abdelwahab Abdalla; Ismail, Tariq Ahmed Mohammed; Awet, Thomas Edward Batista; Supervisor - Sami Abdelrahman Musa (Sudan University of Science & Technology, 2014-09-01)
    The primary objective of this research is to obtain an optimum concentration of alkali, surfactant and salt that can achieve the ultra-low interfacial tension, previous studies have shown that high performing surfactant ...
  • Evaluation of cyclic steam stimulation : case study 
    Taha, Mohamed Abdel Moneim Hamid; Omar, Mohamed abdelmageed Mohamed; Diab, Mohtadi shams Elkamal Hamad; Supervisor - Fatima Khalid (Sudan University of Science & Technology, 2014-09-01)
    Enhanced oil Recovery methods had been used around the world for enhancing oil production and getting higher recovery factor from oil reserves. Cyclic Steam Stimulation is one of the most wide used methods which means ...
  • The Optimum Bit Selection for Hamra Filed 
    Mohammed, BabikerAbdelgadir; NourEldaim, Mohammed Abdelbagi; Husain, Mohammed Ismaeel Osman; Ahmed, Mojahid Mohammed Gasmallah; Supervisor - Mohammed Ahmed Mohammed Naiem (Sudan University of Science and Technology, 2014-09-01)
    Drilling operation is very important in oil and gas industry, so we must choose an optimum bit with high performance and low cost. There are many methods used for evaluating bit performance such as: Cost per foot (CPF), ...
  • Re-design Intermediate CasingTo Solve Corrosion Problem In Well In Higleeg – Case Study 
    Omer, Ayman Mjdoub Mhjoub; Elamin, Mohamed Elamin Ahmed; Fadl alla, - Mohanned Abdalgadir Mohamed; Alhassan, - Omer Elamin Mohamed; Supervisor - Mohamed Ahmed Mohamed Naeem (Sudan University of Science and Technology, 2014-09-01)
    The well casing conceder one of the most important process during drilling and production so that must be designed carefully; there are many problems face the casing, one of this problems is leakage pressure such as that ...

Share

Search SUST


Browse

My Account