Hardware Remote Control Using Conventional Modem

Nasr, Ahmed Khidir; Supervisor - Abd Alrasol Jabar Alzubaidy

dc.contributor.author	Nasr, Ahmed Khidir
dc.contributor.author	Supervisor - Abd Alrasol Jabar Alzubaidy
dc.date.accessioned	2014-11-18T06:48:02Z
dc.date.available	2014-11-18T06:48:02Z
dc.date.issued	2005-12-10
dc.identifier.citation	Nasr,Ahmed Khidir . Hardware Remote Control Using Conventional Modem: A Thesis Submitted in Partial Fulfillment of the Degree of M.Sc. in Computer Engineering /Ahmed Khidir Nasr; Abd Alrasol Jabar Alzubaidy.-khartoum:sudan university of science and technology,College of Engineering,2005:75p:ill;28cm.-M.Sc.	en_US
dc.identifier.uri	http://repository.sustech.edu/handle/123456789/8076
dc.description	thesis	en_US
dc.description.abstract	This thesis will cover the implementation of hardware control by using internal modem installed in a PC. The implementation has been based on the use of Matlab V6.0 as tool for programming and Visual C++ for hardware control programming. Modem has been controlled and programmed by using the AT command set from inside the Matlab. Initially the modem has been configured for communication, and then using the matlab and the AT command it has been programmed to accept calls and auto answer. The system will accept Code from any telephone handset and accordingly send control code through the parallel port to control the hardware. Therefore by building specific code for different hardware operation, it can be controlled remotely by telephone by sending the corresponding code for every operation which will be executed by receiving the code through the PC parallel port.	en_US
dc.description.sponsorship	Sudan University of Science & Technology	en_US
dc.language.iso	en	en_US
dc.publisher	sudan university of science and technology	en_US
dc.subject	Hardware Remote	en_US
dc.subject	Control Using	en_US
dc.subject	Conventional Modem	en_US
dc.subject	Computer Engineering	en_US
dc.title	Hardware Remote Control Using Conventional Modem	en_US
dc.type	Thesis	en_US