SUST Repository

College of Engineering

College of Engineering

 

Collections in this community

Recent Submissions

  • Jamrh, Mudathir Abbas Awadelkareem; Supervisor, - Ali Mohammed Hamadan Adam (Sudan University of Science and Technology, 2020-08-10)
    The objective of this thesis is to design and simulate Intermittent solar adsorption refrigeration machine. A solar heated charcoal / methanol of refrigeration machines as small unit of solar freezer on adsorption ...
  • Rahama, Eman Abdulrahman Mohamed; Supervisor, -Salah eldin Abdelaziz Ajaban (Sudan University of Science and Technology, 2019-04-20)
    The construction industry is one of the largest industries in the world. In Sudan, it played and still a major role in the development process. The construction projects are characterized by a special and unique nature, ...
  • Alkair, Ahmed Abdallah Mohammed; Supervisor, -Ahmed Abdalla Mohamed Imam (Sudan University of Science and Technology, 2019-10-20)
    Lack of Launching Mechanism (LM) for each FN-6 missile where it’s found that one mechanism used repeatedly for the launch of three to ten missiles which reduces the efficiency of launch and causes frequent failures at ...
  • Abdelhady, Eltayeb Ali Dawelbait; Supervisor, -Salah Elfaki Elrofai Elfaki (Sudan University of Science and Technology, 2020-09-12)
    Optical fiber systems are an important infrastructure for broadband communications around the world. Broadband signal transmission with less delay is a major requirement in today's applications. Optical fibers provide ...
  • Alwy, Afrah Saeed Hamid; Supervisor, -Eltahir Abu Elgassim Mohamed Elshaikh (Sudan University of Science and Technology, 2020-08-19)
    The aim of this research is to identify the challenges that faced implementation of Industrialized Building System in Sudan, knowing the extent of using this system in Sudan, as well as to determine the acceptance of ...
  • Hassanain, Huda Ahmed Abdelhadi; Supervisor, -Salah eldin Abdelaziz Ajaban (Sudan University of Science and Technology, 2019-04-20)
    The construction industry in Sudan is an important sector due to its enormous contribution to the country’s economic development. This in terms of employment opportunities and attraction of Foreign Direct Investments which ...
  • Makki, YasirYousif Khalid; Supervisor, -ShariefFadulBabikir (Sudan University of Science and Technology, 2020-09-11)
    The center pivot irrigation system is one of the most modern irrigation systems used in the modern world. Water distribution in this system is carried out by a rotary structure with a water pipe with many sprinklers ...
  • Abd-Alal, Mohammed Salah Mohammed; Supervisor, -Abubker Yousif EltayebOsman (Sudan University of Science and Technology, 2020-07-12)
    Recent huge progression in science and technology upshots in an effective designs and newly advanced ways of manufacturing in order to fulfill the customers’ needs and expectations and to provide them better life experiences. ...
  • حسن, خالدة الفاضل محمد; مشرف, - أسامة محمد أحمد (جامعة السودان للعلوم والتكنولوجيا, 2020-02-01)
    تناول البحث مفهوم السلامة في ﺍﻟﻤﺒﺎﻨﻲ ﺍﻹﺩﺍﺭية وتطرق الي ﺍﻟﺘﺼﻤﻴﻡ والقصور ﻓﻲ الاستيفاء للمتطلبات والاجراءات في المباني الادارية، والتي تؤدي الي عدم استخدام المباني بالكفاءة المطلوبة. كما تناول البحث تدعيم مراحل اتخاذ ...
  • Ali, Reem Barakat Abdullaziz; Supervisor, -Fath Elrahman Ismael Khalifa Ahmed (Sudan University of Science and Technology, 2019-04-23)
    Nowadays, the desire of internet access has influenced quite a large number of users to access high quality video application. In wireless medium, video applications still have high resource requirements, for example, ...
  • Ezzeldien, Lodan Salah; Supervisor, -Galal A. Ali Mohamed (Sudan University of Science and Technology, 2020-09-22)
    These thesis studies highway pavement materials, types, flexible and rigid, characteristics and all tests related CBR, resilient modulus, modulus of sub grade reaction (k), design parameters, and correlation. The thesis ...
  • Alheiday, Sara Alheiday Hassan; Supervisor, -Fath Elrahman Ismael Khalifa (Sudan University of Science and Technology, 2019-10-30)
    Software-Defined Networking (SDN) is an emerging paradigm that enables network innovation by decoupling network control plane from forwarding planes. Thus, SDN controller, become a brain of the network to manage flow in ...
  • Ali, Azza Ali Mohamed; Supervisor, -AwadallaTaifour Ali (Sudan University of Science and Technology, 2019-11-18)
    Robots are the latest technologies used to facilitate agricultural, industrial and medical tasks for humans and to make their life more stable and to accomplish tasks with utmost accuracy. Therefore, scientific studies ...
  • مختار, مزمل المهدي محمد; مشرف, -بخيت البله أحمد سالم (جامعـــــــــة السودان للعلوم والتكنولوجيا, 2018-12-04)
    تناول البحث دراسة اثر مقاولي الباطن فى صناعة التشييد من حيث الانتاجية والجودة والموارد، وتسليط الضوء وإظهار دور مقاولي الباطن في الانتهاء من المشاريع فى الاجأل المحدده، ورفع مستوى المنتج الهندسى الذى يتحقق من اسناد الاعمال ...
  • Abdella, Sara Abdelslam Mohammed; Supervisor, -Eihab Abdelraouf Mustafa (Sudan University of Science and Technology, 2019-03-21)
    In the rapid development of flexible automation and the broad application of computer technology, industrial monitoring software has played an integral role in all kinds of industrial areas. It allows operators to monitor ...
  • Ahmed, Mohamed Abd alrhman Mohamed; Supervisor, -Eltahir Abu Elgassim Mohamed Elshaikh (Sudan University of Science and Technology, 2020-08-19)
    Risk management is an important field and consider relatively a new field of construction industry. so it requires more attention to bring high benefit of construction industry. Construction projects are facing a number ...
  • Omer, Hitham Yousif Mohmmed; Supervisor, -Mohmmed El Nourabdullah (Sudan University of Science and Technology, 2019-11-22)
    Excitation system of the synchronous generators is very essential for generator to induce voltage, the DC excitation system that used in Sennar hydro power station now a days disappear, because its large , has many ...
  • عبدالباقي, شيماء علي السيد; مشرف, -علية عثمان محمد أحمد (جامعـــــــــة السودان للعلوم والتكنولوجيا, 2017-12-28)
    تناول البحث دراسة العوامل التي من شأنها التأثير على أداء العاملين في مشروعات التشييد بالسودان، وذلك من خلال الوقوف على واقع أداء العمال في مشروعات التشييد بولاية الخرطوم، والكشف عن العوامل المؤثرة في أداء العاملين ...
  • Hassan, Khalid Mohamed Ahmed; Supervisor, -Alkhawad Ali Elfaki (Sudan University of Science and Technology, 2020-08-26)
    In this work,a multidisciplinary experience aimed to study how to obtain the 3D model of the upper part (Deck) for fast attack craft FAC-19, designed by Navirex design office in Genova – Italy (This type of craft Used in ...
  • Wagallah, Zein Alabdeen Abdel Moneim Zein Alabdeen; Supervisor, -Salaheldin Mohamed Ibrahim Edam (Sudan University of Science and Technology, 2019-12-21)
    The need for communication and other types of services is very high in daily bases and especially on disaster situation. The Device-to-device (D2D) communication as an underlay to cellular networks has gained increasing ...

View more