College of Engineering Technology Industries: Recent submissions

  • Preparation of an Antimicrobial Cotton Fabric Using Synthesized Zinc Oxide Nanoparticles Stabilized by Alovera Gel 
    Gasm Allah, Omsalma Gasm Allah Babiker; Supervisor, - Magdi Elamin Gibril (Sudan University of Science and Technology, 2018-11-10)
    Nano-finishing is one of the most promising candidate, which is increasing significantly now a day in textile fields, which are ranging from the protective finishing such as; smart textiles, Hygiene textiles, antiballistic, ...
  • Conversion of Plastic Waste into Useful Fuel 
    Awad Elkarim, Walla Salah Salim; Supervisor, - Ahmed Ibrahim Ahmed (Sudan University of Science and Technology, 2018-09-10)
    Pyrolysis is the thermal decomposition of materials at elevated temperature in an inert atmosphere. Pyrolsis of plastic waste had become an important method in producing plastic waste oil as a new supply of energy and an ...
  • Glass Fibers/ Epoxy PVC Sandwich Composite for Train Body Structure 
    Saad, Saad Mustafa Ibrahim; Supervisor, - Ramadan Mohmmed Ahmed (Sudan University of Science and Technology, 2019-04-10)
    Sandwich composites materials are of interest in industrial applications due to their high strength-to-weight ratio and tolerable mechanical properties. This study to describes the use of composite sandwich materials in ...
  • MANUFACTURE OF SOLE FROM LEATHER AND PLASTIC WASTES 
    Mohamed Nour , Mohamed Elsir Elsiddig; Supervisor, - Ibrahim Hassan Mohamed ElAmin (Sudan University of Science and Technology, 2019-02-10)
    The environmental and economic requirement to increase recycling rates is one of the principal driving forces behind technological innovation in the 21st century. Though, this study relied on the industry wastes of leather ...
  • APPLICATION OF TOTAL QUALITY MANAGEMENT ON GARMENTS MANUFACTURING IN SUDAN 
    WEDAAALA, MUY ALSHAZLY HABOB; Supervisor, - MOHAMMED AHMED EBRAHIM ALI ELGALIB (Sudan University of Science and Technology, 2019-02-10)
    This study aimed to use and attempted to apply total quality management TQM in the Sudanese garment manufacturing factories to improve productivity and profitability and product quality and solving the factory's problems ...
  • Modeling, Simulation, and Optimization of fluidized and fixed bed reaction of Ammonia and Methanol processes 
    BASHEER, RAWYA ADAM ABBAKAR; Supervisor, -K.M. Wagialla; Co-Supervisor, -Babiker Karama (Sudan University of Science and Technology, 2018-05-10)
    The aim of this research is to model, optimize and simulate ammonia and methanol production processes in fixed bed reactors and fluidized bed reactors. Mathematical models have been developed to simulate these processes ...
  • Manufacturing and Application of Fatliquor from Castor Oil for Upper Leathers 
    Hassan, Hassan Mohamed Tawfik; Supervisor, - Gurashi Abdalla Gasmelseed (Sudan University of Science and Technology, 2017-11-10)
    Castor oil is classified as semi-drying oil because it oxidizes on exposure to air, giving a gummy film, and can be highly sulphated to make it emulsible in water. In the raw condition it is seldom used in fatliquoring ...
  • DESIGN AND SIMULATION OF INJECTION MOLD FOR PRODUCING PLASTIC WALL PLUGS 
    Eltom, Tasneem Elfatih Haj; Supervisor, Malik Eltahir Elhadi (Sudan University of Science and Technology, 2017-12-10)
    A lot of plastic parts that have a high demand in the Sudanese market are imported from other countries like China and India while it could be designed and manufactured locally. These parts could be designed from the initial ...
  • Study of the effect of graphite on electrical properties of High Density Polyethylene 
    Hussein, RihamAdil Mohamed Alnor; Supervisor, - ArmanMohmmed (Sudan University of Science and Technology, 2018-01-10)
    A sample of high density polyethylene and graphite powder was made to study the effect of graphite power content on the electrical properties of high density polyethylene, graphite offers the benefit of low density and ...
  • Recycling of EVA Foam Waste as A Constituent of Lightweight Concrete Mixture for Construction Application 
    Elgady, Ibrahim Younis Ibrahim; Supervisor, - Ahmed Ibrahim Ahmed Seed Ahmed (Sudan University of Science and Technology, 2018-02-10)
    The amount of waste has increased year by year and the disposal becomes serious problem. Particularly, recycling EVA waste in life and industry is low. This study presents a simple way of recycling EVA waste in the field ...
  • Simulation of Upper Arm of cars Using Carbon Fiber Composite and Steel Alloy 
    Idrees, AbdElrahman Basheer Mohamed; Supervisor, - Arman Mohammed Abdallah (Sudan University of Science and Technology, 2017-11-10)
    This project aims to design the upper arm of suspension system of the car from carbon fiber composite using simulation of solidworks software, that to predict the maximum load suitable to the design and if it possible to ...
  • The effect Of Thickness an Temperature on The burst Pressure of HDPE Pipes 
    Alanaaf, Ahmed Braies Kazma; Supervisor, - Mohamed Deen Hussien (Sudan University of Science and Technology, 2017-09-10)
    The hydrostatic pressure test was used for the high density polyethylene HDPE-100 Pipes to determine the pressure and time for failure and the relation between the two parameters. The study concluded the failure take ...
  • THE EFFECTS OF LINEAR LOW-DENSITY POLYETHYLENE (LLDPE) ON THE MECHANICAL PROPERTIES OF LOW-DENSITY POLYETHYLENE (LDPE) FILM BLENDS 
    Marhom, Mustafa Yousif Bakhet; Supervisor, - Mohamed Deen Hussien (Sudan University of Science and Technology, 2017-09-10)
    Plastic filed has become most usable in all industries plastic products vary depending on the machine used in production process. In film industry there are different type of material can be use , like HDPE, LDPE.LLDPE ...
  • An Analytical Study of the Combined Process Of Bottles Production 
    Ahmed, Osama Hakim Mirghani Hakim; Supervisor, - Mohamed Deen Hussein Mohamed (Sudan University of Science and Technology, 2017-09-10)
    This research study process of combined process of injection of preform and immediately then blowing of these preform on the same machine. Such a process has its advantages compared with the traditional sequence of preform ...
  • Reduction of Plastic Film Waste Using Quality Control Tools 
    Ali, Musab Khalafalla Elfadil; Supervisor, - Ahmed Ibrahim Seedahmed (Sudan University of Science and Technology, 2017-09-10)
    The field of quality undergoes significant changes as reflected by changes in its definition, approaches, techniques, and scope of application. Changes in customer expectation. This also calls for special attention to the ...
  • A Study of Producing High Strength Concrete By using Silica Fume and Super Plasticizer 
    Mohammed, zeinab Mustafa Suliman (Sudan University of Science and Technology, 2017-05-10)
    The aim of this study was to evaluate the performance of high strength Concrete (HSC) containing supplementary cementations materials (Silica Fume) and to find optimum range of silica fume content in the mix. In these ...
  • Viscoelasticity ˗ plastic behavior of fiber˗ reinforced polymer composites 
    ABdalla, Eltoma Sedeeg Eltahir; Supervisor,- Isam Abbeker Ishag (Sudan University of Science and Technology, 2016-08-10)
    Fiber Reinforced Polymer (FRP) composites widely use in different fields such as, aerospace industries; automotive, water tank; marines; and building, etc. The current studies give a brief account of analysis of static ...
  • Study of Pressure Drop and Losses in Poly Propylene Pipes 
    HAMED, MUZAKER SULEMAN; Supervisor,- Arman Mohammed Abdalla (Sudan University of Science and Technology, 2016-02-10)
    While transporting liquid in pipes, energy loss due to friction between pipe wall and liquid molecules all through the pipe and also with the sudden change in flow direction which happen because different fluid tools such ...
  • Improvement and Evaluation of Mechanical, Thermal and Rheological Properties of locally produced Polypropylene 
    Hassanien, Muhab Salah Aldien Shalby; Supervisor, Ahmed Ibrahim Ahmed Seedahmed (Sudan University of Science and Technology, 2015-09-10)
    For many years, polypropylene (PP) has been very success-fully used for film blown, injection molded, and extrusion applica-tions. This work aimed to study the effect of linear low density pol-yethylene (LLDPE), talc and ...
  • Determination of the properties ofThermoplastics by Differential Thermal Analysis 
    Adam, Eltayeb Abdurrahman Hamid; Supervisor - Mohamed Deen Hussein Mohamed (Sudan University of Science and Technology, 2014-04-11)
    The purpose of this research is to use Differential Scanning Calorimetry to find numerous thermal properties of a number of polymer samples. The credibility of the Differential Scanning Calorimetry device to be used was ...

Share

Search SUST


Browse

My Account