Masters Dissertations : Engineering: Recent submissions

  • Plant Redesign for Production of Soil- Cement Blocks 
    Ali, Eldooma Babikkir Adam; Supervisor - Madloul Awad Saaeed (Sudan University of Science & Technology, 2005-08-01)
    Sudan as one of the underdeveloped countries is in need of development and rehabilitation in the field of buildings. Nowadays building materials are one of the problems of buildings in Sudan for its scarce and high price. ...
  • The PIN Diode As a Microwave Control Element 
    Hassan, Waleed Tajeldin; Supervisor - Amir Ahmed Dawoo (sudan university of science and technology, 2006-11-10)
    Switching and phase shifting are done, in the past with mechanical or electromechanical devices . With the advent of ferrite and PN junction semiconductor devices these operations can be carried out at speeds of at least ...
  • Multicarrier Techniques for 4th Generation Mobile Systems 
    Ahmed, Fath EL Rahman Ismael Khalifa; Supervisor - Jacqueline. J. George (sudan university of science and technology, 2006-08-10)
    This thesis investigates the effectiveness of Orthogonal Frequency Division Multiplexing (OFDM) and Multicarrier Code Division Multiple Access (MC-CDMA) as a Multicarrier transmission technique for wireless radio applications. ...
  • TELECOMMUNICATION COPPER CABLE 
    ABDELAAL, ABUELGASIM MOHAMED; Supervisor - ASHRAF GASIM ELSID (Sudan University of Science & Technology, 2005-11-01)
    الاتصالات لها تاريخ طويل ومن فتره مبكرة من حضارة الإنسان عندما كان الإنسان والحيوان يستخدمون الاتصال بالنار والإشارات أي اغلبها طريقه قديمه ولكن من خلال الحرب العالمية الثانية تم محاوله لاستغلال التقنية لإرسال المعلومات0 ...
  • An Analytical Study of Stress variation of Deep Groove Ball Bearing Due To Modification of Their Shaft 
    Yousif, Gamal Eldin AbdElgadir Mohamed; Supervisor - Abdel Fattah Bilal Abdel Salam (Sudan University of Science & Technology, 2005-11-01)
    Previous investigators experimentally studied the endurance of a bearing with under-cut inner and outer rings, and concluded that under-cutting is favorable. In this research, I postulated that manufacturing companies are ...
  • Technical Studies of: Crude Oil Field Processing Facilities 
    Hamad, Khalid Elsir Khalid; Supervisor - Sabir Mohammed Salih (Sudan University of Science & Technology, 2005-10-01)
    The technical of field processing facilities unit was done and discussed the main parts included in the unit.The study has shown the main uints of the field processing facilities that can treat the crude oil and the high ...
  • Study of Pressure drop in Heat Exchangers 
    Musa, Amir AbuBakr; Supervisor - William Ibrahim Assad (sudan university of science and technology, 2005-08-10)
    Heat exchangers are frequently used in industry especially in steam and gas turbines power plants, as air pre-heaters or economizers and the like. These are mainly used to recover part of the thermal energy in exhaust and ...
  • Transformation and Upgrading of A Lead Compacting Machine into A Lead-Wire Production Line 
    Hamed, Omer Ali; Supervisor - Abdelfattah Bilal (Sudan University of Science & Technology, 2005-11-01)
    A large amount of scrap/waste lead accumulated in the Elshugara Ammunition factory through years of production. The optimal utilization of all resources available for manufacturing is a basic function of manufacturing ...
  • A CAD PACKAGE FOR THE DESIGN OF DIFFERENT TYPES OF GEARS 
    ABD ELRAHMAN, SAMI SALAH; Supervisor - Abdelfattah Bilal (Sudan University of Science & Technology, 2005-01-01)
    Design of machine elements is a critical job, because these elements must be designed without any error according to their use. Also the design procedures differ from element to an other and they may need some iteration ...
  • DIALOGUE ENERGY METER 
    Abdel Aziz, Mahamoud Abdel Gadir; Supervisor - Abdel Rasol JabarAlzubaid (Sudan University of Science and Technology, 2006-05-01)
    The modern power system these days consist of generation, transmission and distribution systems, also in most of them the generation regions is very far from the consumption regions. So we need the actual reading for ...
  • STUDY AND DESIGN OF A HORIZONTAL AXIS – WIND TURBINE FOR ELECTRICITY GENERATION 
    ABDULRAHMAN, MURTADA HASSAN; Supervisor - Osman Mohammed Ali Sharfi (sudan university of science and technology, 2005-05-10)
    The model of a horizontal – axis wind turbine was designed to generate 164 watts. Execution of design include the design of the rotor (3 m diameter) which is made of three wooden blades of a cambered airfoil section (NACA ...
  • Computer Based Wireless Cardiology 
    Ali, Marwa Eltigani Abu-Baker; Supervisor - Bala Mahmmed Aljak (sudan university of science and technology, 2005-07-10)
    This project introduces a technique that is processed by radiotelemetry using biopotential and other signals. A technique which provides a wireless link between the biological subjects (patient-animals…. etc.) and the ...
  • Hardware Remote Control Using Conventional Modem 
    Nasr, Ahmed Khidir; Supervisor - Abd Alrasol Jabar Alzubaidy (sudan university of science and technology, 2005-12-10)
    This thesis will cover the implementation of hardware control by using internal modem installed in a PC. The implementation has been based on the use of Matlab V6.0 as tool for programming and Visual C++ for hardware control ...
  • System-on-Chip (SoC) Design using Programmable Logic Devices (PLD's) 
    Hassan, Awad Khalafalla Hamadnalla; Supervisor - Abd Alrasol Jabar Alzubaidy (sudan university of science and technology, 2005-12-10)
    In this research system on chip (SoC) design using programmable logic devices (PLDs) has been introduced. The main objective of this research is to reduce the size of printed circuit boards (PCBs) and the power consumption ...
  • Cyclic Redundancy Check Error Detection Circuit Design 
    Albadawy, Mogahid Omer Hajeltoum; Supervisor - Abdelrasoul Jabar AlzubaidiAbdelrasoul (Sudan University of Science & Technology, 2005-09-01)
    Binary information "bits" are at the heart of modern communications. All information can be represented as blocks of stream of bits. Modern communication networks are designed to carry bits and therefore they can handle ...
  • Inspection & Testing of Pipeline welding : Multi Product Exporting Pipeline 
    A.Alla, Elssawi Ali; Supervisor - Elkhawad Ali Elfaki (Sudan University of Science & Technology, 2005-11-01)
    This study was carried ot in order to revise the x-ray and ultrasonic test results done on the welded joint of the multi product exporting pipeline. The welding practise was carried out as per API 1104 code. The study ...
  • SIMULATION OF STANDARD TELECONTROL PROTOCAL IEC 6087O-5-101 
    ELMANSOUR, TARIG MOHAMED; Supervisor - ABDEL RASOUL JABAR ALZUBAIDI (Sudan University of Science & Technology, 2006-11-01)
    The use of the telecontrol protocols helps developing of control systems. Technical and commercial competitions produce several protocols with different functions and specifications. This leads International Electrotechnical ...
  • INVESTIGATIONS OF ARECEIVER CLOCK BIAS USING PSEUDO-RANGE POINT POSITIONING SOLUTION 
    MOHAMED, AHMED ISHAG OMER; Supervisor - Mohamed A. Khalid (Sudan University of Science & Technology, 2006-02-01)
    Receiver’s clock behaviour is studied using pseudo-range model assuming satellite position as correct. A single point solution was carried out solving for approximate values of Receiver position, (three Cartesian coordinates) ...
  • BUILDING MANAGEMENT SYSTEM (BMS) CONCEPT&DESIGN 
    Elrayah, Tilal Eltayeb Elsheikh; Supervisor - Abd Alrasool Gabbar (Sudan University of Science & Technology, 2006-11-01)
    All buildings have some form of mechanical and electrical services in order to provide the facilities necessary for maintaining a comfortable working environment. These services have to be controlled by some means to ensure, ...
  • Design & Implementation of Integrated Circuit Tester 
    Osman, Mustafa Osman Ali; Supervisor - Abd Alrasol Jabar Alzubaidy (Sudan University of Science & Technology, 2006-12-01)
    Nowadays, technology has been consecutively developing. However, silicon technique (semiconductors), which had made great development, specially integrated circuits (ICs). The ICs consist of a large different number of ...

Search SUST


Browse

My Account