Masters Dissertations : Engineering: Recent submissions

  • Mohammed, Abdallah Ali El-Amin; Supervisor - Saad Daoud Suleiman (Sudan University of Science and Technology, 2010-07-01)
    A fundamental concept in science and technology is that of mathematical modeling. The mathematical model is a mathematical description of dynamic characteristics of a system. The determination of the mathematical model ...
  • Gomah, Gamal Ebrahim; Supervisor - Sabir Mohammed Salih (Sudan University of Science and Technology, 2010-02-01)
    The Combined cycle (Gas/Steam) Performance is highly sensitive to the Ambient Air temperature. Sudan is one of the countries which have high ambient air temperature and low humidity. As a result, power output from combined ...
  • Abdelgafar, Ahmed Abuelqassim Abdelateef; Supervisor - AL-Khawad Ali EL-Faki (Sudan University of Science and Technology, 2010-02-01)
    Yarmouk Industrial Complex administration (A 80 work shop- Doshka and clash manufacturing department) is facing problems in manufacturing two pieces of arms at the end of Doshka. These problems are summarize in reduced ...
  • Mustafa, Ahmed Abdelrahim Elhag; Supervisor - Ahmed Abd Alla Mohamed Imam (Sudan University of Science and Technology, 2009-11-01)
    As the need for feedback control is extended to systems of increasing complexity, which are often highly nonlinear, the need to drive a plant model that is adequate over all the operating conditions becomes more challenging ...
  • Osman, Abubker Yousif Eltayeb; Supervisor - Tag Elssir Hassan Huassan. (Sudan University of Science and Technology, 2010-05-01)
    Active suspension control systems are used into cars body because of their ability to manage the compromise between ride comfort and vehicle road-handling. They constitute typical example of distributed control system. In ...
  • الحاج, عباس إبراهيم محمد; مشرف - سامي عبد الله عثمان (جامعة السودان للعلوم والتكنولوجيا, 2009-12-01)
    تعتبر معرفة المبادئ الأساسية للتصميم الهندسي للمنحنيات ودراسة تأثيرها على حركة المركبات وسلامتها من الأمور المهمة التي يجب أن يلم بها المهندس المختص. فلا شك أن معرفة العلاقة بين تصميم المنحنيات وتأثيرها على المركبات ...
  • Amasaip, Abdelgayoum Fathelrahman Mohammed; Supervisor - Abd Alrasool Jaber Elzobidi (Sudan University of Science &Technology, 2007-05-01)
    Remote Control Devices (RCDs) were introduced in 1930 as a mechanism for changing stations on radios. Now we introduce a new style of Remote Control Systems (RCSs) and that is Computer Based Remote Control System (CBRCs). ...
  • Ali, Ahmed Abdalla Mohamed; Supervisor - Saad Daoud Sulaiman (Sudan University of Science and Technology, 2007-04-01)
    Applications involving processing of data from external analog sources (sensors) often require some kind of digital filtering of the data prior to using the data to respond to some external event. In these cases 8- and ...
  • HUSSAIN, HAZAR ABDELGADIR MOHAMMED; Supervisor - ABDURASOOL JABBAR ALZUBAIDY (Sudan University of Science &Technology, 2013-05-01)
    This research aims to create and develop a program to compress audio files in real time with high quality. The implementation of this program adopts method of redundancy remove by using MATLAB language. The research ...
  • Abd-Allah, Mohammed Mohy-Eldeen; Supervisor - Yousif Ali Yousif (Sudan University of Science and Technology, 2009-08-01)
    The general objective of this research is to study and evaluate the fire protection systems used in the National Telecom Corporation (N.T.C) Tower in Khartoum town. The specific objectives include the study of different ...
  • Ahmed, Nazar Hassan Ahmed; Supervisor - Abd Alrasoul Jabar Alzebaidi (Sudan University of Science &Technology, 2013-03-01)
    Modern Transmission devices provide many capabilities and features which significantly enhance engineers’ experience within the telecommunication environment. The ability to also remotely access and control those devices, ...
  • Abbaker, Adam Abdalla Adam; Supervisor - Mohammed. A. Khalid (Sudan University of Science &Technology, 2008-08-01)
    Measurements of the GPS radio signal carrier phases are biased by atmospheric effects. These delays in different observations and their, often neglected. Impact on baseline parameter estimation is generally regarded as ...
  • Salih, Najwan A. Fattah Abu El Wafa; Supervisor - Bakri A. Raheem Gaafar (sudan university of science and technology, 2004-08-10)
    The primary purpose of TQM is to provide excellence in customer satisfaction through continuous improvements of products and processes by the total involvement and dedication of each individual who is in any way a part of ...
  • Abdalla, Abdalla Sief Eldin Mohammad; Supervisor - Abdelfatah Bilal (sudan university of science and technology, 2004-07-10)
    This study was made to verify the assumption of using the technique of automatic mesh generation of finite element to generate an NC program. It was done utilizing the ANSYS program capabilities to generate and mesh ...
  • السماني, عصام الدين; مشرف - بكري عبد الرحيم (جامعة السودان للعلوم والتكنولوجيا, 2004-09-10)
    أوضحت الدراسة أيضاً أن هناك مشاكل ومعوقات تؤثر على دور وفعالية التأمين الهندسي. فقد تعرض التأمين الهندسي بشركة شيكان لخسائر في الأعوام 1991م ، 1992م ، 1993م ، وذلك لأن الشركة لم تقم بالتنبؤ بالخطر عن طريق تجميع عدد كبير ...
  • Hassan, Hussien Eltom; Supervisor - Ahmed Mohamed Ibrahim (Sudan University of Science &Technology, 2008-12-01)
    This study is based on the fact that, Malaria is a major public health problem in Sudan, and especially in Khartoum State, the field of study. Almost about 300,305 infections being reported yearly in a population of about ...
  • Ibrahim, Sana'a Elsadig Abdullah; Supervisor - Alawad Fathelrahman Elfak (Sudan university of Science and Technology, 2009-08-01)
    This research aims to use the AutoCAD program in clothes pattern drafting in order to develop a simple , accurate method of pattern drafting and also available for every pattern maker due to the simplicity of interfacing ...
  • OSMAN, AMAL ABDEL GAFFAR MAGBOUL; Supervisor - Salah Abd Alattif Mohammed (Sudan university of Science and Technology, 2009-08-01)
    A series of experiments was carried out in order to determine the effect of the yarn input tension on the structure of plain knitted fabric. The results obtained showed that as the input tension increases, the stitch length ...
  • Amin, Hala Hashim; Supervisor - Hago Elfadil Haroun (Sudan university of Science and Technology, 2013-05-01)
    This research was conducted as a trial to get acquainted with the Sudanese foot shape and anatomy as it is necessary in the field of foot wear industry. Besides, the research aims at proposing shoes size and fitting system ...
  • Salih, Abeer Abbas Hussein; Supervisor - Hashim Ali Salim (Sudan university of Science and Technology, 2010-01-01)
    The sley of all existing weaving machines has a curvature movement. The curvature movement of the sley has so many disadvantages. The existed design of the sley gives high accelerations resulting in producing high noise ...

Search SUST


Browse

My Account