dc.contributor.author |
Mohammed, BabikerAbdelgadir |
|
dc.contributor.author |
NourEldaim, Mohammed Abdelbagi |
|
dc.contributor.author |
Husain, Mohammed Ismaeel Osman |
|
dc.contributor.author |
Ahmed, Mojahid Mohammed Gasmallah |
|
dc.contributor.author |
Supervisor - Mohammed Ahmed Mohammed Naiem |
|
dc.date.accessioned |
2014-12-28T10:31:10Z |
|
dc.date.available |
2014-12-28T10:31:10Z |
|
dc.date.issued |
2014-09-01 |
|
dc.identifier.citation |
Mohammed,BabikerAbdelgadir.The Optimum Bit Selection for Hamra Filed/BabikerAbdelgadir Mohammed ... { etal } ;Mohammed Ahmed Mohammed Naiem.-Khartoum:Sudan University of Science and Technology,College of Petroleum Engineering and Technology,2014.- 35P. : ill. ; 28Cm.-B.Sc. |
en_US |
dc.identifier.uri |
http://repository.sustech.edu/handle/123456789/9323 |
|
dc.description |
B.Sc. |
en_US |
dc.description.abstract |
Drilling operation is very important in oil and gas industry, so we must choose an optimum bit with high performance and low cost.
There are many methods used for evaluating bit performance such as:
Cost per foot (CPF), Specific Energy (SE) and Bit Dullness method (BD).
The optimum bit selection of HAMRA formation is PDC because it is soft to medium consolidated and the best method for evaluating this formation is the bit dullness method because it calculated time required for bit inside a well without dullness which equal 90.46 hours. |
en_US |
dc.description.sponsorship |
Sudan University of Science and Technology |
en_US |
dc.language.iso |
en |
en_US |
dc.publisher |
Sudan University of Science and Technology |
en_US |
dc.subject |
Petroleum Engineering |
en_US |
dc.subject |
Bits |
en_US |
dc.subject |
Poly Crystalline Diamond |
en_US |
dc.subject |
Diamond |
en_US |
dc.subject |
Roller Cone |
en_US |
dc.subject |
Hamra Filed |
en_US |
dc.title |
The Optimum Bit Selection for Hamra Filed |
en_US |
dc.title.alternative |
اختيار سكينة الحفر المثالية لحقل حمرا |
en_US |
dc.type |
Thesis |
en_US |