Bachelor of Engineering: Recent submissions

  • Study of Buzz Surge for Supersonic Air Intake 
    Abdelkreem, Mohamed Ibrahim Adam; Mohamed Ahmed, Osman Salah Osman (Sudan University of Science and Technology, 2014-10-10)
    The project provides study of instability which occurs when supersonic inlet operation at off design conditions (flight condition and engine operation condition).When the inlet operate near to critical regime, the stability ...
  • individual engine performance modeling of W1 whittle T.J.E. 
    ABDALLA, FAWZY ALI HASSAN; BASAEED, KHALID ALI MOHAMMED; SALIH, SALAH MOHAMMED EL-HAJ (Sudan University of Science and Technology, 2014-08-10)
    A performance model for W1 Whittle Engine using the simulation program (GESTPAN), General Stationary and Transient Propulsion Analysis, has been developed. There are different optimization methods used by the simulation ...
  • DESIGN AND BUILD UAV WITH COAXIAL PROPELLER 
    SULIMAN, AHMED HAMD-ALNEEL MADNI; MOHAMMED, AHMED HASSAN AL-NOOR; ALI, ABDULLAHI AL-ALAMEN EHAMER; MOHAMMRD, MOAWIA ALTOM ISMAEL; AHMED, MOHAMMED MAHMOUD OSMAN; ALMOBARK, MOSAB MOHAMMED ALI OMER (Sudan University of Science and Technology, 2014-08-10)
    The UAV had been designed in order to meet the specifications required for surveillance and reconnaissance mission. It followed the global UAV designs in this industry where the pusher configuration is dominating over ...
  • Conceptual Design of a Military Training Aircraft 
    Mohammed, Ahmed Mubarak Ahmed; Abd ELziz, Mohamed Abdalla Mohamed ELhassan; Mohamed, Mohamed Ibrahim Abd ELAziz; Saeed, Saber Idrees Mohammed (Sudan University of Science and Technology, 2014-08-10)
    This project is aimed to design a military training aircraft, and perform aerodynamic and stability analysis. On other hand, the performance qualities are determined to ensure that the designed model satisfies the ...
  • Development of flexible wing design 
    Elmamoun, Ahmed; Abd Alrahman, Hosam; Mohammed, Mohammed Khider (Sudan University of Science and Technology, 2014-08-10)
    The Flexible Wing is that wing which made by smart materials can be changed its shape depending on the situation in order to optimize aerodynamic efficiencies and aircraft control. Improve the wing aerodynamic characteristics ...
  • study the concepts for silent propulsion system 
    awaddalla, alamin ismail alamin; daoud, majed ahmed mohammed; Ibrahim, tabark ahmed (Sudan University of Science and Technology, 2014-08-10)
    noise emitted by commercial aircraft has been one of the most critical environmental issue , such as large number of people effected by aviation noise .The International body ICAO sets the common rules for the level of ...
  • PRELIMINARY DESIGN AND PERFORMANCE ANALYSIS OF THE TURBOSHAFT ENGINE 
    ALI, AHMED HYDAR AHMED; ABDULLAH, KHALID IBRAHEEM (Sudan University of Science and Technology, 2014-09-10)
    This project is aimed to determine and study the altitude and speed characteristics of the turboshaft engine suitable for helicopter applications, about specific fuel consumption and power available when operated at ...
  • Structural Design and Analysis of a Light Aircraft Wing 
    Abdullah, Aliaa Salih Ali; ALbasheer, Hana Mohamed ALmagzob; ALsaid, Tagwa Ahmed; Mohammed, Yagein Abdalmoniem (Sudan University of Science and Technology, 2014-09-10)
    Wing structure consists of skin, ribs and spars sections. The spars carries flight load and the weight of the wings while on the ground. Other structural and forming members such as ribs are attached to the spars, with ...
  • Design of Solar Energy Voltage Regulator for Aviation Applications 
    Ahmed, Fatima Hassan Mohamed Alsheikh; Ali, Mohamed Taj Aldeen Osman; Osman, Shimaa El-zein Altaj (Sudan University of Science and Technology, 2014-09-10)
    A PV voltage regulator for solar application is proposed to boost and regulate the voltage to charge an aircraft 12V/0.43A battery. The proposed regulator is designed using a boost converter and PWM controlled by a PI ...
  • نظام إدارة الإنتاج باستخدام برنامج ميكروسوفت إكسل : دراسة تطبيقية في مصنع المذاق للمياه المعدنية 
    محمـــــد، أيمــن عاصــــم أحمــــــد; أبوستـة،زاهــد الفاتح مصطفى; محمـــد،محمــد بابكر ميرغني (جامعة السودان للعلوم والتكنولوجيا, 2014-08-10)
    يستهدف هذا البحث الإشكال الإداري في المشاريع الصناعية الصغرى في السودان . وبالأخص إشكال إدارة الإنتاج ومتعلقاته . يستهدفه بقصد حله على مستويين. المستوى الأول يتمثل في الهيكل الإداري من حيث علاقاته و تكاليفه و تطويره . ...
  • دراسة جدوى فنية واقتصادية لورشة متكاملة حديثة لصيانة السيارات بجامعة السودان 
    عوض الكريم، عبد الله محمد احمد; محمـد، مــازن الزاكــي الحسـيـــن; السني، محمـــد أحمــــد مصطفـى (جامعة السودان للعلوم والتكنولوجيا, 2014-08-10)
    تعتبر ورش صيانة السيارات الموجودة في السودان في المؤسسات الحكومية قليلة جداً تعتبر تقليدية نوعاً ما في هذا البحث تم تقديم دراسة متكاملة لورشة صيانة سيارات حديثة تخدم جامعة السودان للعلوم والتكنولوجيا ويمكن أن تصبح استثماراً ...
  • سياسة الصيانة المتبعة في شركة كولدير الهندسية 
    جبرائيل،أيوب جمــال موهــــــــوب; المـاحي،, صلاح الدين محمد أحمد; محــــــارب، ميــــنا نبــيل صـبـــحي (جامعة السودان للعلوم والتكنولوجيا, 2014-08-10)
    الصيانة هي الوظيفة التي تمكن من تهيئة المعدات لكي تعمل بفعالية وهي نشاط يصمم من أجل الحفاظ على المعدات وغيرها من الموجدات في حالة تشغيلية . تشكل الصيانة نسبة كبيرة من تكلفة الإنتاج حوالي 20% وبدراسة نظم السياسة المتبعة ...
  • EFFECT of COATING on RESIDUAL STRESSES in ELCTROSTATIC ACTUATOR MEMS DEVICE 
    Badry, Amro Saif aldeen Mohamed; Ahmed, Omer Mohamed Altayib; Ibrahim, Mohamed Hayder Hamed (Sudan University of Science and Technology, 2014-08-10)
    Constitute the pressures or stresses remaining one problems resulting from manufacturing may affect these stresses negatively on the performance of manufactured parts. These residual stress may be negative or positive, ...
  • Position Control of a Micro Electro Mechanical Actuator By Using MATLAB And ANSYS 
    Ali, Altayeb Abdalla Altayeb Alhaj; Hammad, Ezzaddein Adam Edreis; Osman, Saddam Mohamed Salih (Sudan University of Science and Technology, 2014-08-10)
    Electrostatic actuators have a large effect in many MEMS devices, e.g. sensors, actuators. The amount of applied voltage to an electrostatic actuator has a direct impact in the displacement of the cantilever between the ...
  • DESIGN OF A TYPICAL MULTI-ROLE VEHICLE USING QUAD-ROTOR THEORY 
    Koko, Mohamed Imad Aldieen Adlan (Sudan University of Science and Technology, 2014-08-10)
    This research presents a design of a typical multi-role vehicle that can be used in the air, above the water and the ground as a typical remote controlled “RC” model. The design of the vehicle was a challenge of combining ...
  • Planning and implementing of Industrial unit by using network analysis In (Reinforcement Steels Preparation Unit) 
    Alsir, Abdalraheem Almamoon; Ragab2., Abubakr Mohamed; Alhadi, Alhadi Alfatih (Sudan University of Science and Technology, 2014-08-10)
    The research scope was project management and planning using critical path method , it was applied on planning and implementing a reinforcement steel preparation unit , which is a unit that used to cut ,bend , and prepare ...
  • Study method of manufacturing water bottles 
    Hassan, Almohtde Abody Mahmmoud; Mahmmoud, Moayed Omer El-Tayeb; Mohammedden, Rami Salah Nasur (Sudan University of Science and Technology, 2014-08-10)
    This research aims to design a template to produce water bottles with volume of (500 ml) and the type of plastic used in the manufacturing pet . size was selected according to standard template all the parts and dimensions ...
  • Compensating Frequency Change using DC Static Voltage On Electrostatic Actuator 
    Sharief, Abdelsamad Mahmoud Hussien; Ali, Mohammed Elsiddig; Ali, ObadaAbdElraouf (Sudan University of Science and Technology, 2014-08-10)
    Electrostatic actuators have major role in many MEMS devices, e.g. sensors, actuators. The amount of applied voltage to an electrostatic actuator has a direct impact on frequency throughout the actuator. This research aims ...
  • Modeling and Simulation of a MEMS gyroscope using Analysis 
    Majzoob,Sabir Sabir Mohammed; Salih,Rami Hussein; Mustafa,Amjed Abdel Hameed Zaki (Sudan University of Science and Technology, 2014-08-10)
    Micro electro mechanical systems refer to devices or systems integrated with electrical and mechanical components that are in Micro scale. With its small size, low cost and efficiency the technology has been widely used ...
  • الحماية المثلى من اشعة الليزر 
    الفكي،صالح بابكر صالح; النبريص،محمود زيدان جابر; عمر،محمود محمد صالح (Sudan University of Science and Technology, 2014-08-10)
    في هذا المشروع تم البحث عن انظمة ومعدات الحماية والوقاية لأجهزة الليزر المستخدمة في المجال الطبي داخل السودان والاسس والقواعد المفروضة من قبل الدولة ومدى تطبيقها داخل المؤسسات الصحية ومقارنتها مع انظمة الحماية الموضوعة من ...

Search SUST


Browse

My Account