Bachelor of Engineering: Recent submissions

  • Photocatalytic CO2 Transformation into Fuel 
    Mohammed, Gafar Ahmed Gafar; Farah, Khalid Mohammed Fageer; Elobeid, Mohaned Elobeid Mohamed; Supervisor -, A.A.A.Abuelnuor (Sudan University of Science and Technology, 2015-09-10)
    The increasing energy crisis and the worsening global climate caused by the excessive utilization of fossil fuel have boosted tremendous research activities about CO2 capture, storage and utilization. Artificial photocatalytic ...
  • PRODUCTION AND CHARACTERISTICS ANALYSIS OF BIODIESEL DERIVED FROM USED COOKING OIL 
    Mohammed, AbduAllah Husien Ahmed; Mohammed, Hazim Ali Elhaj; Mohammed, Saghanimah Osama Mer; Supervised, -Hazir Farouk Abdelraheem Elhaj (sudan University of Science & Technology, 2015-10-01)
    There is increasing interest on Used cooking oils as cost effective feedstock for biodiesel production. In this study, biodiesel was produced from used cooking oil (Acid value 1.09 mgKOH/g), collected from one of the ...
  • فشل المحامل في الصناعات الكیمیائیة (الادويه والصابون 
    عبدالله،علي محمد عوض; بابكر،فتح الرحمن الحاج محمد; عبدالله،أبوبكر محمد عجیب; اشراف, -الخواض علي الفكي (جامعه السودان للعلوم والتكنولوجيبا, 2015-09-01)
    تناول هذا البحث فشل المحامل فى الصناعات الكيميائيه وبالاخص مصانع الادويه والصابون وذلك لاهميه المحامل فى الصناعات عامه تمت زياره العديد من مصانع الصابون والادويه وتم توزيع استبيان علي مهندسي المصانع كما تم جمع عدد من ...
  • Measurement of Heat and Mechanical Losses in Internal Combustion engines 
    Mohammed, Fayad Idris Ahmed; Abdallah, Mohammed Taj Elser Ali; Taha, Mòmen Hassan Abdelrahman; Supervised, -Eltayeb Hassan Elshaikh (Sudan University of science and technology, 2015-10-01)
    This thesis focuses on measurement of the heat and mechanical losses in I.C.engines based on a gasoline engine data operated on different engine speeds. The objective is to determine the classic and modern methods of ...
  • تصميم ومحاكاة اختيار تروس علب السرعات في ماكينات القطع باستخدام برنامجي MATLAB و SOLIDWORKS 
    عيسى،عبد الله صلاح الدين أحمد; الفضل،عبد الله عبد الرحمن عبد الله; ابراهيم, علي غانم الطاهر; مشرف -, الخواض علي أحمد الفكي (جامعة السودان للعلوم والتكنولوجيا, 2015-10-07)
    التصميم الهندسي يتطلب جهود كبيرة وحسابات معقدة وخاصة تصميم التروس وعلب السرعات وشمل اعادة الكثير من الخطوات بحسب النتائج المبدئية المتحصل عليها كما ان عملية تجديد التروس تتطلب دقة كبيرة في الاختيار لكي تتحقق السرعات ...
  • Cost and waste reduction in PASGIANOS Company 
    Salih, Ahmed Kamal; Mahmood, Mohammed Awad; Supervisor, -Widatalla Elamein (Sudan University of Sciences and Technology, 2015-10-01)
    ‫تم بناء فكرة المشروع على تقليل حجم التالف ويؤدي إلى تقليففص تكلفففة‬ ‫النتاج، ومن ثم التركيز على ج فودة القي فاس والتحلي فل ت فؤدي إل فى تحقي فق‬ ‫ف‬ ‫ف‬ ‫ف ف‬ ‫ف‬ ‫ف‬ ‫.‪ DMAIC model‬النتائج المطلوبة وذلك ...
  • Cost and waste reduction in PASGIANOS Company 
    Salih, Ahmed Kamal; Mahmood, Mohammed Awad; Supervisor, -Widatalla Elamein (Sudan University of Sciences and Technology, 2015-10-01)
    ‫تم بناء فكرة المشروع على تقليل حجم التالف ويؤدي إلى تقليففص تكلفففة‬ ‫النتاج، ومن ثم التركيز على ج فودة القي فاس والتحلي فل ت فؤدي إل فى تحقي فق‬ ‫ف‬ ‫ف‬ ‫ف ف‬ ‫ف‬ ‫ف‬ ‫.‪ DMAIC model‬النتائج المطلوبة وذلك ...
  • تصميم مجمع شمسي لتسخين المياه 
    الناير،مظفر محمد محمد النور; أحمد،مصعب عبد المنعم الطاهر; محمد،محمد عماد الدين علي (جامعة السودان للعلوم والتكنولوجيا, 2015-09-01)
    يعاني العالم من نضوب مصادر الطاقة الاحفورية التي تعتبر شائعة الاستخدام في عصرنا هذا وكذلك يعاني العالم والبشرية والبيئة من التاثيرات السالبة التي لا زالت تؤثر بسبب استخدام هذه الطاقة كالأحتباس الحراري الذي أدى الى تغيير ...
  • Design and Fabrication of Small Scale Biomass Units (Wood boiler) 
    Ahmed, Tarig ElHashimi Ali; Hussien, Abass Abdaljalil Adam; Alzain, Abdalrahman Hassan Mohammed ahmed; Abdalgader, Abdalgader Mohammed Amir (Sudan University of Sciences and Technology, 2015-09-01)
    The aims of this thesis is to design and fabricate a boiler that uses Mesquite wood as an alternative fuel to fossil fuels and approve Mesquite wood to produce vapor that can be used to generate electricity , beside ...
  • Condenser Problems In Steam Turbine E Efficiency 
    Alta ltayeb, Mojahid F Fodalalkareem Abdalmajeid; Babiker, Mohammed Galal Mohammed Ali; Ahmed, Mohammed Hussein karrar; Supervised, -Abdallah Mokhtar Mohammed Abdallah (Sudan University of Sciences and Technology, 2015-10-01)
    A steam power plant continuously converts the energy stored in fuels into rotate shaft work and ultimately into electricity. Energy released by burning of fuel is transferred to water in the boiler to generate steam, which ...
  • Safety Relief Valve Selection, Operation and Maintenance 
    Humaida, Mahmoud Salah Eldin Awad; Ahmed, Mazin Abdalmoniem Taha; Alkhair, Mohamed Mahgoub Mohamed; Supervised, -Abdallah Mokhtar (Sudan University of Sciences and Technology, 2015-09-01)
    This research aimed at the safety relief valve and its importance in power systems to insure the safety of the facility from overpressure that caused pipelines explosion. The research shows how to select the safety ...
  • Manufacturing of Wind Turbine 
    Abdalbagi, Mohammed Abdalbagi Mohammed; Ahmed, Mohammed Babiker Mohammed; Ahmed, Mohammed Alfateh Musa; Supervised, -Musab Zarouq (Sudan University of Sciences and Technology, 2015-10-01)
  • DESIGN AND STUDY OF A PARABOLIC TROUGH COLLECTOR FOR GENERATING ELECTRICITY 
    Khalaf Allah, Ahmed Mohmmed Amasaib; Farah, Mohmmed Al-Mujtaba abd Al-bagi Mohmmed; Mohmmed, Ashraf abd Allah Hamed; Hassan, Mohmmed Ebrahim Abd al-Razig; Supervised, -A.A.A.Abuelnuor (Sudan University of Sciences and Technology, 2015-10-01)
    Mathematical models were used in this project to find the direct and reflected solar radiation from the air layer on the surface of the earth per hour based on the total daily solar radiation on a horizontal surface, ...
  • Wearable Body Temperature Device For Home Monitoring 
    Mohammed, Asjad Hatim Altaj; Salih, Heba Esameldin Osman; Tay-Elseed, Roaa Siddig Elobied; Supervised, -Mai Abdel Rahman Osman (Sudan University of Sciences and Technology, 2015-10-01)
    Patient health monitoring is a common thing done by doctors to monitor their patients’ health condition. The most crucial reading monitored by doctors is the patient’s body temperature. Unfortunately, current systems ...
  • Designing and Implementing ECG Signal Using Microcontroller 
    Abdulla, Eman Omer Ali; Ahmad, Asma Mustafa Abas; Ali, ElKhansa Kamal Abd ELRahman; Supervised, -El Tahir Mohamad Hussein (Sudan University of Sciences and Technology, 2015-10-01)
    This project ‘designing and implementing ECG signal using microcontroller’ deals with a transfer of ECG data from the patients to be displayed in labVIEW. The idea of our project is firstly taking up an ECG signal from ...
  • Computerized Inspection Program and Procedures for Medical Devices (CIPP) 
    Khalifa, Alaa Yahia; Ahmed, Duha Eltayeb; Elameen, Ethar Bhaa Eldain (Sudan University of Sciences and Technology, 2015-10-01)
    Hospitals and health care organizations possess a large number of medical devices and equipments, most of these devices and equipments are very complex and designed with modern technology. Hospitals must insure that ...
  • Design of NeuroFuzzy System for Multivariable Blood Pressure Control 
    Abdallah, Alzahraa Ibrahim; Babiker, Esraa Abdallaziz; Mamoun, Esraa Bakri; Supervised, -Eltahir Mohamed Hussein (Sudan University of Sciences and Technology, 2015-10-01)
    The objective of this research is to design an intelligent control system, to investigate the advantages of using Fuzzy Logic and neural networks multivariable blood pressure. Algorithm has been designed, use neural ...
  • Design and Simulation of Mobile Robotic Arm Controller Using Microcontroller and Cell Phone 
    Nour Aldien, Sami Siddig; Fadl Elmwla, Osama khalid; Alhassen, Abd Algani Mohammed; Supervisor, -Eltahir Mohammed Hussein (Sudan University of Sciences and Technology, 2015-10-01)
    The objectives of design this robot is simply to help the humans in the future for security purpose. In the present scenario, there are many recent developments of robotics and communication on a large scale. The methodology ...
  • Hybrid technique in MRI Segmentation Methods 
    Bashir, Hadeel Saeed; Mohameed, Nehal haj ALfaki; Alkhalifa, BIan Omer (Sudan University of Sciences and Technology, 2015-10-01)
    Brain image segmentation is one of the most important parts of clinical diagnostic tools, brain images mostly contain noise, in homogeneity and sometimes deviation, therefore, accurate segmentation of brain images is a ...
  • Design of NeuroFuzzy System for Multivariable Blood Pressure Control 
    Abdallah, Alzahraa Ibrahim; Babiker, Esraa Abdallaziz; Mamoun, Esraa Bakri; Supervised, -Eltahir Mohamed Hussein (Sudan University of Sciences and Technology, 2015-10-01)
    The objective of this research is to design an intelligent control system, to investigate the advantages of using Fuzzy Logic and neural networks multivariable blood pressure. Algorithm has been designed, use neural ...

Search SUST


Browse

My Account