Bachelor of Engineering: Recent submissions

  • Smart Solar Streets Lighting System 
    Ali, Abdalla Ali Abdelrahman; Awad, Ahmed Awad Eltayeb; Ahmed, Babiker Yousof Babiker; Mohamed, Motaz Mohamed Abdalla; Supervisor, -Salah Eldeen Gasim Mohammed (Sudan University of Science and Technology, 2018-10-01)
    The energy consumption in lighting is increasing day by day. Lot of efforts have been made in order to minimize the energy consumption in lighting. Photovoltaic (PV) is the best solution for the energy requirements in the ...
  • Smart Stick for visually impaired persons 
    AbdulrahmanTom, Bodour Mohammed ahmed; Mohammed, Gabas Haider Abd_Alwdoud; Abu zaid, Saja Baderaldeen Mohammed; Alamein, Shima Alamein Hussien; Supervisor, -Awadalla Taifour Ali (Sudan University of Science and Technology, 2018-10-01)
    One of the main problems that blind people suffer from is the unavailability of the blind sticks that discovers obstacles and alerts the blind. This Research aims to devise a smart stick to assist the blind in motion by ...
  • Development and Improvement of Electric Bike 
    حسین, علي خالد علي; الحسین, عصام الدین یاسر عباس; نقد لله, عبد اللطیف محمد عبداللطیف; سلیمان, عمر عبدالعظیم عثمان; Supervisor, -Hanaa jaafar alameen (Sudan University of Science and Technology, 2018-10-01)
    To Enable the bike to walk longer by adding a new set of batteries that switch between them and the first group automatically to make one in the case of charging and the other in the case of discharging at the same ...
  • Design and Implementation of Smart Car With Accident Avoidance and Detection 
    Mohamed, Bashir abdelgadir jumaa; Mohamed, Sofian mohamed mohamed ahmed; abdallah, Habiballah mohammed alhussin; brema, Mohamed motwakel ahmed; Supervisor, Ebtihal H G Yousif (Sudan University of Science and Technology, 2018-10-01)
    The Rapid growth of technology has made our life easier. This advancement in technology also increased the traffic hazards. Hence the ratio of road accidents which take place frequently increases causing immense loss of ...
  • LAPAROSCOPIC TRAINING BOX 
    Magbol, Manal Yosif Abd ALrahman; Mohamed, Fatima Omar Ahmed; ALnur, Mona Hassan Hussein; Idris, Ahmed Bahaa Aldeen Ahmed; Supervisor, -Galal Abdu AL Rahman Mohamed (Sudan University of Science and Technology, 2018-10-01)
    This project works with the advanced technologies to help and develop the medical staff through training with modern facilities. This system depends on Arduino controller to control and process the hardware such as camera ...
  • Hand Simulator Control System 
    Tai Elseed, Gassim Ahmed Mohammed; Alsaid, Abd Alazim Alsaid Ahmed; Edrees, Setlnesa Gafar Esmail; Supervisor, -Galal Abd Alrahaman Mohammed (Sudan University of Science and Technology, 2018-10-01)
    The human deal with many problem and risks in any fields like: industrial fields, chemical laboratories and nuclear industries. These risks which mentioned above happen because the human doing it manually , because of ...
  • Study of Solar Hydrogen System for Remote Areas 
    Hamid, Alaa Abdelatif Mohamed-Alameen; Abu-Elhassan, Alyaa Mohamed Omer; El-Ebaid, Khansa Hamid Mohamed; Karamallah, Malaz Ataallah Ali; Supervisor, -Abuelnuor Abdeen Ali Abuelnuor (Sudan University of Science and Technology, 2018-10-01)
    Energy is indispensable for human being, it plays a big role as it the main determiner for human activities. Electricity generation, transportation and heat production for heavy industries in the industrialized countries
  • Study of Generation Protection at Garri 4 Thermal Station 
    Ibrahim, Khalid Fathi Mohamaden; Mustafa, Abbas Kamal Mohamed; Alharith, Abdallah Ahmed Ali; Mustafa, Adnan Algaly Alameen; Supervisor, Gaffar Babiker Osman (Sudan University of Science and Technology, 2018-10-01)
    Generators are the most superior unit in power system, it consists of several parts such as stator, rotor and DC excitation system, each one of these parts must be protected from abnormal condition and faults. Several of ...
  • Transmission Line Protection Using Numerical Relay 
    Faroug, Ahmed Abbas Elhaj; Mohamed, Altahir Abass Ahmed; Ibrahim, Mohmmed Ahmed Haroun; Alatta, Muhammad Yassir Nsr Eldeen; Supervisor, -Elfadil Zakaria Yahia (Sudan University of Science and Technology, 2018-10-01)
    The objective of this research to study and understand the technology and function of the latest developed relays with the main focus on the preparation of the relay setting and uploading them in the relays and check correct ...
  • Power Transformers Performance and Tests 
    Ahmed, Ahmed Mohamed Hamid; Aldiy, Monzer Alaa-Aldin Mohamed; Hassan, Mrwan Esam-Aldin Esmat; Abd-Aljalil, Osama Hayder Ahmed; Supervisor, -Salah Eldeen Gasim Mohamed (Sudan University of Science and Technology, 2018-10-01)
    Transformer is one of the most important components and components of the electric power system, which is indispensable in the electrical power system and according to that importance. This study was to analyze the performance ...
  • Study of Short Circuit Faults-Case study Sudanese National Grid 
    Dawood, Alnazeir Hamad Ali; Gebriel, Mohammed Abdelrahman Mohammed; Mohammed, Mohammed Alhadi Balal; Mohammed, Mohammed Jalal Mustafa; Supervisor, -Mohammed Osman Hassan (Sudan University of Science and Technology, 2018-10-01)
    In the previous period, the national grid experienced many changes represented in the addition of Merawi power station and the addition of so many new stations. This extension required the calculation of short circuit ...
  • A Stepper Motor Application in Smart Dish 
    Saleh, Akram Yassir Mohammed Ahmed; Saad, Alamin Omer Alamin; Ahmed, Mohamed Abdulrahman Salih; sir elkhatem, Wael Nasr Eldin; Supervisor, -Gaffer Babiker (Sudan University of Science and Technology, 2018-10-01)
    A stepper motor can be looked upon as a digital electromagnetic device where each pulse input results in a discrete output (i.e. a definite angle of shaft rotation). There are different modes to drive stepper motor such ...
  • Implementation Of Automatic Gun Fighter 
    Ibrahim Abubaker Ibrahim, Amin; Fahmi Ahmed Mohammed Zain, Ahmed; Altyeb Ballal Omara, Mosab; Zainelabdeen Abdallah Mustafa, Tajeldeen; Supervisor, -Gaffar Babiker (Sudan University of Science and Technology, 2018-10-01)
    In classical guard system may need to have more than one person to guard important places in order to increase the scope of the guard, and Keeper could not continuous monitoring all the time for the important places which ...
  • Link Performance Modeling and Simulations for Aeronutical Mobile Airport Communication System(Aeromacs) 
    Mohammed, Alaa Tajelsir Ali; Mohammed, Doaa Magdi Ali; Nuri, Manahil Abubakr Osman; Ali, Nihal Altayeb Mohammed; Supervisor-, Elessaid Sulaiman Saad (Sudan University of Science and Technology, 2017-10-01)
    The aim of this project is to develop the existing communication system in aircrafts and to substitute it with the AeroMACS which is operating at C-Band. To Implement the AeroMACS it is crucial to examine its performance. In ...
  • RE-ENGINING FOR SAFAT-03 
    Ahmed, Ahmed Awadallah; Hussain, Mohamed Azhary; Mohamed, Mohamed Abdallah; Salih, Ebrahim Ayoup Mohamed; Supervisor-, Mohamed Mahdi (Sudan University of Science and Technology, 2017-10-01)
    The engine is one of key factors to increasing the performance and improving the economics of aircraft. The most recent phenomenon in the industry, again engine driven, is a growing importance placed on the re-engining of ...
  • Wind Tunnel Investigation of Propeller Characteristics and Wing-Propeller Interaction 
    Gmoan, Mazin Eltaher Gbash; Mousa, Mohammed Elnor Mohammed; Al-husaini, Mohammed Yahya Ali Ahmed; Ahmed, Thoyba Abdulrahman Mohammed; Supervisor-, Intisar Abdel Fattah Mohammed Khattab (Sudan University of Science and Technology, 2017-10-01)
    The main goal of this project is to review the mechanisms and describe the phenomena that play a role in the aerodynamic interference between the propeller and a wing. Therefore, the characteristics of the isolated propeller ...
  • Manufacturing Technology of Composite Material Structure 
    MUSTAFA, ELSADIG HAIDER BASHRA; HAMID, MANSOR IBRAHIM MANSOR; IBRAHEEM, MARWA FATHI ELTAHER; OMER, OMER AHMED MOHAMMED; Supervisor-, ABD ALRAHIM SAAD OMER (Sudan University of Science and Technology, 2017-10-01)
    This project aims to manufacture an aileron for SAFAT 01 by using composite material (carbon/epoxy) and analyze the structure in order to reduce the high weight due to using other materials. This model sketched by using ...
  • Study of Using Plasma Welding techniques in A/C Parts Instead of Riveting 
    Elamin, Elhibir Rahmtalla Abdelgadir; Seidahmed, Khalid Salah-Eldeen Sir-Elkhatim; Bushara, Mohamed Faroog Mohamed; Supervisor-, Abdulraheem Saad Omer (Sudan University of Science and Technology, 2017-10-01)
    This research aimed to study the plasma welding technology in aircraft structure instead of riveting, and prove that using plasma welding leads to noticeable reduction in aircraft weight, and offers better strength ...
  • Implementation of a Quadcopter Control System 
    Abu Arki, Al-Baraa Omer Mohammed; Idrees, Mohammed Saif El-Deen Ibraheem; Abbas, Muzammil Mohammed Muzammil; Supervisor-, Khidir Tay Allah Yousif (Sudan University of Science and Technology, 2017-10-01)
    The control system of a quadcopter is the most important part. Control system governing quadcopter stability and control movement by correcting measurement errors and comparing to the desired values achieving pilot desired ...
  • Engine Failure During Takeoff In Twin Engine A/C 
    Sougy, Ali yousif Saleh; Hmed, Anas Yousif Ahmed; Osman, Moawia Balla Khalafalla; Supervisor-, ALI ALHASEEN AHMED (Sudan University of Science and Technology, 2017-10-01)
    This project study the condition of twin engine air craft during takeoff , at one engine failure ,This causes several negative effects on A/C, in addition to the loss of engine thrust ,the performance and stability are ...

Share

Search SUST


Browse

My Account