SUST Repository

Browsing PhD theses : Engineering Technology Industries by Title

Browsing PhD theses : Engineering Technology Industries by Title

Sort by: Order: Results:

  • Applying industrial management for improving productivity In Dubai steel factory in Sudan 
    Mohamd, Ashraf Eltayib Dafallah; Supervisor, -Essam Abbakar Eshaq; Co-Supervisor, -Alfateh Abbas Alqourashi (Sudan University of Science and Technology, 2021-07-22)
    The iron and steel industry is an important basic industry of Sudan national economy and plays a vital role in the process of industrialization and urbanization. Prosperity in steel sector reflects positively in national ...
  • Computer Aided Design for Polymer Extrusion and its Dies 
    Ahmed, Arman Mohammed Abdalla; Supervisor, Mohammed Deen Hussein Mohammed (Sudan University of Science and Technology, 2014-09-10)
    This research work concentrated on using Ansys poly flow software and equation of percentage root square error (PRMSR) to select the best viscosity model (viscosity vs. shear rate) at isothermal condition for polypropylene. ...
  • Conversion of Plastic Waste into Useful Fuel 
    Awad Elkarim, Walla Salah Salim; Supervisor, - Ahmed Ibrahim Ahmed (Sudan University of Science and Technology, 2018-09-10)
    Pyrolysis is the thermal decomposition of materials at elevated temperature in an inert atmosphere. Pyrolsis of plastic waste had become an important method in producing plastic waste oil as a new supply of energy and an ...
  • Development of New Vapor Pressure Correlation for Organic Compounds 
    Ali, Nassereldein Musa Abakar; Supervisor, - Ali A. Rabah (Sudan University of Science and Technology, 2020-11-10)
    The vapor pressures of organic compounds are the most important thermodynamics property needed by engineers in different industries for instant petrochemical and chemical processes as it is a useful thermodynamic property ...
  • Garment Assembly Line Balancing Using Modeling and Simulation 
    Mohammed, Hanan Osman Ali; Supervisor, -Ahmed Ibrahim Seedahmed (Sudan University of Science and Technology, 2019-05-10)
  • Improvement and Evaluation of Mechanical, Thermal and Rheological Properties of locally produced Polypropylene 
    Hassanien, Muhab Salah Aldien Shalby; Supervisor, Ahmed Ibrahim Ahmed Seedahmed (Sudan University of Science and Technology, 2015-09-10)
    For many years, polypropylene (PP) has been very success-fully used for film blown, injection molded, and extrusion applica-tions. This work aimed to study the effect of linear low density pol-yethylene (LLDPE), talc and ...
  • MANUFACTURE OF SOLE FROM LEATHER AND PLASTIC WASTES 
    Mohamed Nour , Mohamed Elsir Elsiddig; Supervisor, - Ibrahim Hassan Mohamed ElAmin (Sudan University of Science and Technology, 2019-02-10)
    The environmental and economic requirement to increase recycling rates is one of the principal driving forces behind technological innovation in the 21st century. Though, this study relied on the industry wastes of leather ...
  • Manufacturing and Application of Fatliquor from Castor Oil for Upper Leathers 
    Hassan, Hassan Mohamed Tawfik; Supervisor, - Gurashi Abdalla Gasmelseed (Sudan University of Science and Technology, 2017-11-10)
    Castor oil is classified as semi-drying oil because it oxidizes on exposure to air, giving a gummy film, and can be highly sulphated to make it emulsible in water. In the raw condition it is seldom used in fatliquoring ...
  • Modeling and Analysis of Polypropylene Fiber Extrusion Process 
    Adam, Abdelbagi Yusuf Abdelbagi; Supervisor, -Ahmed Ibrahim Ahmed; Co-Supervisor, -MuhabSalahaldenShalby (Sudan University of Science and Technology, 2021-07-12)
    Extrusion processes are widely used in plastic industries aiming to produce advanced solutions for increasingly sophisticated demands for plastics.Processes are not designed based on professional engineering design, but ...
  • Modeling, Simulation, and Optimization of fluidized and fixed bed reaction of Ammonia and Methanol processes 
    BASHEER, RAWYA ADAM ABBAKAR; Supervisor, -K.M. Wagialla; Co-Supervisor, -Babiker Karama (Sudan University of Science and Technology, 2018-05-10)
    The aim of this research is to model, optimize and simulate ammonia and methanol production processes in fixed bed reactors and fluidized bed reactors. Mathematical models have been developed to simulate these processes ...
  • Recycling of EVA Foam Waste as A Constituent of Lightweight Concrete Mixture for Construction Application 
    Elgady, Ibrahim Younis Ibrahim; Supervisor, - Ahmed Ibrahim Ahmed Seed Ahmed (Sudan University of Science and Technology, 2018-02-10)
    The amount of waste has increased year by year and the disposal becomes serious problem. Particularly, recycling EVA waste in life and industry is low. This study presents a simple way of recycling EVA waste in the field ...
  • Tanneries Liquid Waste Management 
    Tayfor, Rehab Ahmed Selman; Supervisor, - Gurashi Abdalla Gasmelseed (Sudan University of Science and Technology, 2020-01-10)
    Tanneries use much of chemicals such as sodium sulphide, calcium hydroxide, ammonium sulphate, acids, basic chromium sulphate bactericide and fungicide. All these substances contribute to the environment pollution, and ...
  • Upgrading of Heavy Crudes and Residue for Liquid fuels production 
    Ali, Yasir Abdalla Dafaalla; Supervisor, -Gurashi Abdalla Gasmelseed; Co-Supervisor, -Tomadir Awad Ibraheem Hamed (Sudan University of Science & Technology, 2021-10-21)
    Trends have predicted that peak oil production, will be reached around 2020-2030, where the production of oil starts to decline after that, there will be less and less oil to refine, the depletion of light oil and the ...
  • The Use of Glass Fiber Reinforced Epoxy Composite in Automotive Bumper Applications 
    Fadelelseed, Abdeldaim Abdelgader Ali; Supervisor, -Ahmed Ibrahim Ahmed; Co-Supervisor, -Ramadan Mohamed Ahmed (Sudan University of Science & Technology, 2022-02-12)
    The application of composite materials to structures nowadays presented the need for engineering analysis and modeling to understand failure mechanisms. Modern automotive industry reveals that plastics can be reinforced ...
  • Use of Polyethylene Terephthalate (PET) Bottles Waste as Partial Substitute for Sand in Cement-based Mortar Applications 
    Ahmed, Ahmed Ibrahim; Supervisor , Abelshakour Awadelkarim Mohamed (sudan university of science and technology, 2005-07-10)
    The amounts of PET bottles waste are steadily increasing globally. In Sudan the PET bottles wastes average per year for the years 2003 -2015 amounts to 38336 ton, and estimated to reach in total to 500000 ton by the year ...

Share

Search SUST


Browse

My Account