College of Engineering Technology Industries: Recent submissions

  • Detection of Thermoplastic Degradation 
    EL-Radi, Alaa Ibrahim Mohammed; Supervisor - Mohammed Deen Hussein Mohammed (Sudan University of Science and Technology, 2014-05-11)
    The degradation of HDPE was studied by exposing HDPE to weathering. The HDPE were prepared at Adeb Plastic Factory in Omdurman. Four types of HDPE were use in this study:  Virgin HDPE.  50/50 mixture of recycle and ...
  • Comparison Between Wood Plastic Composites(WPCs) And Woods 
    Salim, Wala Salah; Supervisor - IsamAbbakarIshag (Sudan University of Science and Technology, 2014-03-11)
    Composites can be defined as materials that consist of two or more chemically and physically different phases separated by a distinct interface. The different systems are combined judiciously to achieve a system with more ...
  • Stress properties of plastic pipe under constant pressure in the long term 
    Agaballh, Salma Agaballh Ali; Supervisor - Mohamed Deen Hussien (Sudan University of Science and Technology, 2014-05-10)
    Due to its durability, plastics pipes are normally used for water transport. It replaced the metal pipes .the long term hydrostatic pressure test according to ASTMD2837-02 and EN921 -1994 requires very long periods for ...
  • Viscosity Measurement by using Melt flow Index for Thermoplastic polymers 
    Mohamed, Maysaa Elrasheed Rahamtalla; Supervisor - Mohamed Deen Hussein Mohamed (Sudan University of Science and Technology, 2014-04-10)
    In plastics manufacturing, the melt flow index (MFI) is used as a routine indicator of rheological behavior when more expensive and laborious determinations of well-defined material functions are impractical. The MFI is the ...
  • Computer Aided Design for Polymer Extrusion and its Dies 
    Ahmed, Arman Mohammed Abdalla; Supervisor, Mohammed Deen Hussein Mohammed (Sudan University of Science and Technology, 2014-09-10)
    This research work concentrated on using Ansys poly flow software and equation of percentage root square error (PRMSR) to select the best viscosity model (viscosity vs. shear rate) at isothermal condition for polypropylene. ...
  • Factors Effecting Bulk Density of Expandable Polystyrene on Pre-expansion Process 
    Ahmed, Gehan Elsayed Yousif; Supervisor - Abdalfatah Belal Abd AlsLam (Sudan University of Science and Technology, 2014-06-10)
    The expandable polystyrene is a light weight material which has been widely used in constructions, packaging and Marines devices. The manufacturing of the expanded polystyrene products is a multi-step process that depends ...
  • Use of Polyethylene Terephthalate (PET) Bottles Waste as Partial Substitute for Sand in Cement-based Mortar Applications 
    Ahmed, Ahmed Ibrahim; Supervisor , Abelshakour Awadelkarim Mohamed (sudan university of science and technology, 2005-07-10)
    The amounts of PET bottles waste are steadily increasing globally. In Sudan the PET bottles wastes average per year for the years 2003 -2015 amounts to 38336 ton, and estimated to reach in total to 500000 ton by the year ...

Share

Search SUST


Browse

My Account