SUST Repository

Browsing College of Engineering Technology Industries by Issue Date

Browsing College of Engineering Technology Industries by Issue Date

Sort by: Order: Results:

  • Use of Polyethylene Terephthalate (PET) Bottles Waste as Partial Substitute for Sand in Cement-based Mortar Applications 
    Ahmed, Ahmed Ibrahim; Supervisor , Abelshakour Awadelkarim Mohamed (sudan university of science and technology, 2005-07-10)
    The amounts of PET bottles waste are steadily increasing globally. In Sudan the PET bottles wastes average per year for the years 2003 -2015 amounts to 38336 ton, and estimated to reach in total to 500000 ton by the year ...
  • Comparison Between Wood Plastic Composites(WPCs) And Woods 
    Salim, Wala Salah; Supervisor - IsamAbbakarIshag (Sudan University of Science and Technology, 2014-03-11)
    Composites can be defined as materials that consist of two or more chemically and physically different phases separated by a distinct interface. The different systems are combined judiciously to achieve a system with more ...
  • Viscosity Measurement by using Melt flow Index for Thermoplastic polymers 
    Mohamed, Maysaa Elrasheed Rahamtalla; Supervisor - Mohamed Deen Hussein Mohamed (Sudan University of Science and Technology, 2014-04-10)
    In plastics manufacturing, the melt flow index (MFI) is used as a routine indicator of rheological behavior when more expensive and laborious determinations of well-defined material functions are impractical. The MFI is the ...
  • Determination of the properties ofThermoplastics by Differential Thermal Analysis 
    Adam, Eltayeb Abdurrahman Hamid; Supervisor - Mohamed Deen Hussein Mohamed (Sudan University of Science and Technology, 2014-04-11)
    The purpose of this research is to use Differential Scanning Calorimetry to find numerous thermal properties of a number of polymer samples. The credibility of the Differential Scanning Calorimetry device to be used was ...
  • Stress properties of plastic pipe under constant pressure in the long term 
    Agaballh, Salma Agaballh Ali; Supervisor - Mohamed Deen Hussien (Sudan University of Science and Technology, 2014-05-10)
    Due to its durability, plastics pipes are normally used for water transport. It replaced the metal pipes .the long term hydrostatic pressure test according to ASTMD2837-02 and EN921 -1994 requires very long periods for ...
  • Detection of Thermoplastic Degradation 
    EL-Radi, Alaa Ibrahim Mohammed; Supervisor - Mohammed Deen Hussein Mohammed (Sudan University of Science and Technology, 2014-05-11)
    The degradation of HDPE was studied by exposing HDPE to weathering. The HDPE were prepared at Adeb Plastic Factory in Omdurman. Four types of HDPE were use in this study:  Virgin HDPE.  50/50 mixture of recycle and ...
  • Factors Effecting Bulk Density of Expandable Polystyrene on Pre-expansion Process 
    Ahmed, Gehan Elsayed Yousif; Supervisor - Abdalfatah Belal Abd AlsLam (Sudan University of Science and Technology, 2014-06-10)
    The expandable polystyrene is a light weight material which has been widely used in constructions, packaging and Marines devices. The manufacturing of the expanded polystyrene products is a multi-step process that depends ...
  • Computer Aided Design for Polymer Extrusion and its Dies 
    Ahmed, Arman Mohammed Abdalla; Supervisor, Mohammed Deen Hussein Mohammed (Sudan University of Science and Technology, 2014-09-10)
    This research work concentrated on using Ansys poly flow software and equation of percentage root square error (PRMSR) to select the best viscosity model (viscosity vs. shear rate) at isothermal condition for polypropylene. ...
  • Improvement and Evaluation of Mechanical, Thermal and Rheological Properties of locally produced Polypropylene 
    Hassanien, Muhab Salah Aldien Shalby; Supervisor, Ahmed Ibrahim Ahmed Seedahmed (Sudan University of Science and Technology, 2015-09-10)
    For many years, polypropylene (PP) has been very success-fully used for film blown, injection molded, and extrusion applica-tions. This work aimed to study the effect of linear low density pol-yethylene (LLDPE), talc and ...
  • Study of Pressure Drop and Losses in Poly Propylene Pipes 
    HAMED, MUZAKER SULEMAN; Supervisor,- Arman Mohammed Abdalla (Sudan University of Science and Technology, 2016-02-10)
    While transporting liquid in pipes, energy loss due to friction between pipe wall and liquid molecules all through the pipe and also with the sudden change in flow direction which happen because different fluid tools such ...
  • Viscoelasticity ˗ plastic behavior of fiber˗ reinforced polymer composites 
    ABdalla, Eltoma Sedeeg Eltahir; Supervisor,- Isam Abbeker Ishag (Sudan University of Science and Technology, 2016-08-10)
    Fiber Reinforced Polymer (FRP) composites widely use in different fields such as, aerospace industries; automotive, water tank; marines; and building, etc. The current studies give a brief account of analysis of static ...
  • A Study of Producing High Strength Concrete By using Silica Fume and Super Plasticizer 
    Mohammed, zeinab Mustafa Suliman (Sudan University of Science and Technology, 2017-05-10)
    The aim of this study was to evaluate the performance of high strength Concrete (HSC) containing supplementary cementations materials (Silica Fume) and to find optimum range of silica fume content in the mix. In these ...
  • An Analytical Study of the Combined Process Of Bottles Production 
    Ahmed, Osama Hakim Mirghani Hakim; Supervisor, - Mohamed Deen Hussein Mohamed (Sudan University of Science and Technology, 2017-09-10)
    This research study process of combined process of injection of preform and immediately then blowing of these preform on the same machine. Such a process has its advantages compared with the traditional sequence of preform ...
  • The effect Of Thickness an Temperature on The burst Pressure of HDPE Pipes 
    Alanaaf, Ahmed Braies Kazma; Supervisor, - Mohamed Deen Hussien (Sudan University of Science and Technology, 2017-09-10)
    The hydrostatic pressure test was used for the high density polyethylene HDPE-100 Pipes to determine the pressure and time for failure and the relation between the two parameters. The study concluded the failure take ...
  • THE EFFECTS OF LINEAR LOW-DENSITY POLYETHYLENE (LLDPE) ON THE MECHANICAL PROPERTIES OF LOW-DENSITY POLYETHYLENE (LDPE) FILM BLENDS 
    Marhom, Mustafa Yousif Bakhet; Supervisor, - Mohamed Deen Hussien (Sudan University of Science and Technology, 2017-09-10)
    Plastic filed has become most usable in all industries plastic products vary depending on the machine used in production process. In film industry there are different type of material can be use , like HDPE, LDPE.LLDPE ...
  • Reduction of Plastic Film Waste Using Quality Control Tools 
    Ali, Musab Khalafalla Elfadil; Supervisor, - Ahmed Ibrahim Seedahmed (Sudan University of Science and Technology, 2017-09-10)
    The field of quality undergoes significant changes as reflected by changes in its definition, approaches, techniques, and scope of application. Changes in customer expectation. This also calls for special attention to the ...
  • Simulation of Upper Arm of cars Using Carbon Fiber Composite and Steel Alloy 
    Idrees, AbdElrahman Basheer Mohamed; Supervisor, - Arman Mohammed Abdallah (Sudan University of Science and Technology, 2017-11-10)
    This project aims to design the upper arm of suspension system of the car from carbon fiber composite using simulation of solidworks software, that to predict the maximum load suitable to the design and if it possible to ...
  • Manufacturing and Application of Fatliquor from Castor Oil for Upper Leathers 
    Hassan, Hassan Mohamed Tawfik; Supervisor, - Gurashi Abdalla Gasmelseed (Sudan University of Science and Technology, 2017-11-10)
    Castor oil is classified as semi-drying oil because it oxidizes on exposure to air, giving a gummy film, and can be highly sulphated to make it emulsible in water. In the raw condition it is seldom used in fatliquoring ...
  • DESIGN AND SIMULATION OF INJECTION MOLD FOR PRODUCING PLASTIC WALL PLUGS 
    Eltom, Tasneem Elfatih Haj; Supervisor, Malik Eltahir Elhadi (Sudan University of Science and Technology, 2017-12-10)
    A lot of plastic parts that have a high demand in the Sudanese market are imported from other countries like China and India while it could be designed and manufactured locally. These parts could be designed from the initial ...
  • Study of the effect of graphite on electrical properties of High Density Polyethylene 
    Hussein, RihamAdil Mohamed Alnor; Supervisor, - ArmanMohmmed (Sudan University of Science and Technology, 2018-01-10)
    A sample of high density polyethylene and graphite powder was made to study the effect of graphite power content on the electrical properties of high density polyethylene, graphite offers the benefit of low density and ...

Share

Search SUST


Browse

My Account