dc.contributor.author |
Mahmoud, Ahmed Mohamed |
|
dc.contributor.author |
Ahmed, Hossam Hassan |
|
dc.contributor.author |
Hamad, Mohaned JamalEldin Mohamed |
|
dc.contributor.author |
Supervisor, -Yousif Eltahir Bagadi |
|
dc.date.accessioned |
2017-12-05T07:30:56Z |
|
dc.date.available |
2017-12-05T07:30:56Z |
|
dc.date.issued |
2017-10-04 |
|
dc.identifier.citation |
Mahmoud, Ahmed Mohamed . Simulation Study of Tool joint Thread Connection Failure washout : Case Study Sudanese well \ Ahmed Mohamed Mahmoud , Hossam Hassan Ahmed , Mohaned JamalEldin Mohamed Hamad ; Yousif Eltahir Bagadi .- khartoum: Sudan University of Science & Technology, College of Petroleum Engineering and Technology, 2017.- 40 P:ill; 28cm.- Bachelors search |
en_US |
dc.identifier.uri |
http://repository.sustech.edu/handle/123456789/19255 |
|
dc.description |
Bachelor Research |
en_US |
dc.description.abstract |
Thread connections are widely used in oil and gas industry. Determination of under which this thread may leak is very crucial for drilling operation continuity.
In this thesis finite element software (ABAQUS) has been used to simulate the base case scenario of X well tool joint and the conditions, of failure has been determined.
From the analysis, leak was found on thread connection and the main reason were high displacement due to internal pressure and also high deformation strain. And a suggestion has been made according to the results. |
en_US |
dc.description.sponsorship |
Sudan University of Science & Technology |
en_US |
dc.language.iso |
en |
en_US |
dc.publisher |
Sudan University of Science and Technology |
en_US |
dc.subject |
Petroleum Engineering and Technology |
en_US |
dc.subject |
Simulation Study of Tool joint Thread |
en_US |
dc.subject |
Connection Failure |
en_US |
dc.subject |
washout |
en_US |
dc.title |
Simulation Study of Tool joint Thread Connection Failure washout |
en_US |
dc.title.alternative |
محاكاة تشوه اسنان اداة الربط الانهيار |
en_US |
dc.type |
Thesis |
en_US |