Masters Dissertations : Engineering: Recent submissions

  • Design of an Efficient Cyclic Redundancy Check-32 using Field Programmable Gate Array 
    Abdulanbi, Mohamed Salah Eldin; Supervisor, -Hisham Ahmed (Sudan University of Science and Technology, 2018-11-29)
    The streaming of data over the networks is increasing day by day. the current applications, video web sites, Internet of things and Machine to Machine made new era of the data over the internet.Accordingly, the networking ...
  • Implementation of Digital FM Receiver using FPGA 
    Makkawi, Mohammad Al-Husien Mohammad Ahmed; Supervisor, -Rashid A. Saeed (Sudan University of Science and Technology, 2018-06-28)
    The complexity of hardware in traditional FM radio lead to bigger radio size, noisy, difficulties in maintenance and higher production costs. In addition to limitation on protocols and frequency bands supported, which lead ...
  • A Study of Problems and Solutions of Traffic Congestion in Khartoum City Using Geographical Information Systems 
    Mohammed, Abubaker Osman Abdalla; Supervisor, - Khalafalla Mohammed Badi (Sudan University of Science and Technology, 2019-01-10)
    Traffic congestion is a challenge for developed and non-developed countries. Khartoum city is one of the world's cities facing traffic congestion problems. The citizens of this city suffer from the queues of cars that fill ...
  • Control Pick and Place Robotic Arm by using Voice Recognition 
    Hakim, Ahmed Hakim Mirghani; Supervisor, - Abd Alla Salih Ali Mahmoud (Sudan University of Science and Technology, 2018-11-10)
    Voice Controlled Robot (VCR) is a mobile robot. The robot’s action can be controlled by the user by giving a specific person’s voice commands. The robot will receive the voice commands from the person through the microphone ...
  • ECG Signal Analysis for Biometric Recognition 
    Elamin, Arwa Alaaldin Mursi; Supervisor, - Mohammed Yagoub Esmail (Sudan University of Science and Technology, 2016-09-10)
    This thesis studies the applicability of the electrocardiogram signal (ECG) as a biometric. The ECG, a record of electrical currents generated by the beating heart, is potentially a distinctive human characteristic, since ...
  • Control System Design for Utilizing Natural Gas in Diesel Engines Using Microcontroller 
    Taha, Emad Ahmed Abdulrahim; Supervisor, - Ala-Eldin Abd allah Awouda (Sudan University of Science and Technology, 2018-11-01)
    With the increasing concern regarding diesel engine emissions, including Nitrogen Oxides (NOX) and Particulate Matter (PM), and the rising of energy demand as well, the utilization of alternative fuels in diesel engine ...
  • Design of Digital Fault Recorder Using Microcontroller for Electrical Distribution Company Network 
    Alameen, Khogali Abdulkareem Khogali; Supervisor, - Mudathir Abdallah Osman Fagiri (Sudan University of Science and Technology, 2018-12-01)
    It is obvious that our modern life has become very dependent on the constant availability of electricity. Therefore, the efficiency of electrical energy is of the utmost importance in our lives and this increase in the ...
  • Modeling and Evaluation of LoRa and Sigfox Low Power Wide Area Networks for Internet of Things 
    Elamin, Esra Bashir Abbas; Supervisor, - Niemah Izzeldin Mohamed Osman (Sudan University of Science and Technology, 2019-11-10)
    During this decade, there is a huge expansion in the number of low-power Internet connected devices. The Low Power Wide Area Network (LPWAN); because of its low-cost communication ability and long-range, is considered as ...
  • Partial research for a master's degree in mechanical engineering Effect of Injector Nozzle Holes on Diesel Engine Four Stroke Performance 
    Abdelgaliel, Abubaker Faisal Musa; Supervisor, -Abubker Yousif Eltayeb (Sudan University of Science and Technology, 2019-03-21)
    Diesel engine model simulation designed for four-stroke direct-injection diesel engine requires the use of advanced analysis to carry out of the direct-injection diesel engine model performance effect focuses on fuel ...
  • Design of a hybrid artificial hip joint using finite element analysis 
    Mohemed, Ryan Kamal SaiedAhemed; Supervisor, -Elias Sidieg Mohammed Hassan (Sudan University of Science and Technology, 2019-03-31)
    Rehabilitation is an important branch of biomedical engineering specializations that is exceedingly related to the healthcare delivery and its improvement, one of the most important topics of rehabilitation is prosthesis that ...
  • Design and Implementation of Building Management System using Internet of Things 
    Ahmed, Rehab Jaffer Nimmer; Supervisor, - Fath Elrahman Ismael Khalifa (Sudan University of Science and Technology, 2019-01-07)
    This research presents a building management system (BMS), which is the key module in order to perform the controlling and automation. The main area of this BMS focuses on switching and controlling of the power input/output, ...
  • Developing an Algorithm to GenerateLinear Movement in CNC Machines 
    Mohammed, Ayman Omer Adam; Supervisor, -Hassan Osman (Sudan University of Science and Technology, 2018-12-13)
    This study was carried out to find technique to minimize the accumulated error during linear and inclined movement (G00, G01) and in circular movement or motion in curve (G02, G03) on X, Y axes in CNC machines. The error ...
  • Improve 3axis CNC Router by Adding New Axis 
    Hamid, Zoelnoon Nasraldeen; Supervisor, -Hassan Osman (Sudan University of Science and Technology, 2018-08-14)
    Increase in the rapid growth of Technology significantly increased the usage and utilization of CNC systems in industries but at considerable expensive. The idea on Improve 3axis CNC router by add new axis came forward ...
  • Implementation of Denoising MEMS Accelerometer Using Wavelet Transformation 
    Yousif, Mohammed Abd Elmonim Mohammed; Supervisor, - Omer Abdel Razag Sharif Abubaker (Sudan University of Science and Technology, 2019-03-10)
    The MEMS accelerometer is an important sensor to measure the object’s motion state (acceleration), and it is a key device in inertial systems such as, vibration measurement and navigation systems. MEMS accelerometer has ...
  • Pitch Angle Control for Variable Speed Wind Turbine using PI Controller 
    Elnosairi, Nagat Mahgoub Gaffar; Supervisor, - Sharief Fadul Babikir Elfadul (Sudan University of Science and Technology, 2018-09-10)
    The renewable energy sources such as wind and solar energy have taken their place in exchange for the conventional sources, which have greater impact on the environment. This thesis presents the design and analysis of Wind ...
  • SELECTION OF OPTIMAL PIPELINE ROUTE USING GEOGRRAPHIC INFORMATION SYSTEMS 
    Alhaj, Sara Mohamed; Supervisor, - Mohammed Elamein Ahmed Babiker (Sudan University of Science and Technology, 2018-01-10)
    The process of selecting pipeline route is very complicated, selection of the optimal path is based on a verity of considerations (environmental and technical considerations) such as topography, geology, land use, population ...
  • A Design of Automated Car Parking Control System 
    Ezz alarap, Mohammed Merghni Ahmed; Supervisor, - Abd Allah Salih Ali Mahmoud (Sudan University of Science and Technology, 2018-10-20)
    An Automated Parking System (APS) is a mechanical system designed to minimize the area and/or volume required for parking cars. Like a multi-story parking garage, an APS provides parking for cars on multiple levels stacked ...
  • Energy benchmarking of steam thermal power station By using pinch analysis 
    Hummaida, Elnaji Abbas Farah; Supervisor, - Abuelnuor A A Abuelnuor (Sudan University of Science and Technology, 2018-08-10)
    The rising cost of energy and environmental concerns have led the power plant to search for techniques of reducing energy consumption in thermal operations. In this research, pinch analysis was applied to steam thermal ...
  • Optimizing the Control of the Diesel Backwash Filters Using Foxboro DCS 
    Abusin, Alaeldin Hassan Abuagla; Supervisor, - Mohamed Elnour Abdalla (Sudan University of Science and Technology, 2018-09-10)
    The first and most important stage of the Diesel quality and competency improvement in Diesel Hydro treated unit (DHT) is the backwashing process of the main filters, which is triggered periodically depending on pressure ...
  • Factors Affecting in Construction Projects’ Cost In Sudan- case study Khartoum state 
    A.Alhafeez, Suhair Siddig; Supervisor, - Alia Osman Mohammed (Sudan University of Science & Technology, 2018-12-01)
    The construction industry in Sudan has witnessed rapid growth in recent years, the emergence of mega projects and strategic projects and the entry of foreign companies of large names. This has led to the growth of the entry ...

Share

Search SUST


Browse

My Account