Masters Dissertations : Engineering: Recent submissions

  • Transmission Line Design (Sag & Tension Calculation) in eastern Grid Project 
    Alamin, Bahaeldeen Ali Abdelrahman; Supervisor ,- Khamees Arbeesh Saad Eldeen (Sudan University of Science and Technology, 2011-02-01)
    Electric power transmission line design is highly affected by the climatically conditions. Sudan climate is partially tropical & Subtropical considering that maximum & minimum temperature differences are between 5oC to ...
  • ADESIGN METHOD FOR AGRICULTURAL ROADS 
    ABD ELRAHEAM, MOHAMED ABDALLA; ; Supervisor ,- ABBAS LAZ (Sudan University of Science and Technology, 2011-01-01)
    Roads are an important means of developing new areas and are increasingly required for convenient movement of people and their products to the markets. The main objective of this study is to design low cost agricultural ...
  • Programmable Logic Controllers Based Generator Protection System 
    Mohammed, Mohammed Elfatih Hassan Ahmed; Supervisor ,- Abd-Alla Salih Ali (Sudan University of Science and Technology, 2011-10-01)
    This research is about generator protection via Programmable Logic Controller. Afield device such as, sensors, current transformer, voltage transformer equipped to used as input signal supply to the PLC input modules, when ...
  • Peak to average power ratio reduction in MIMO-OFDM systems by using LDPC Codes 
    Ishag, Ezzeldin Abdel wahab; Supervisor ,- Mohammed Hussein Mohammed (Sudan University of Science and Technology, 2011-10-01)
    Multiple Input and Multiple Output Orthogonal Frequency Division Multiplexing (MIMO-OFDM) systems is the potential candidate for fourth generation (4G) mobile radio communication systems. The MIMO-OFDM systems ...
  • DIFFERENTIATE BETWEEN GRAY AND WHITE MATTER OF HUMAN BRAIN USING MRI 1.5 T 
    IDRIS, NIEMAT ADAM HAROON; Supervisor ,- MOHEMD EL-BASHIR MUSTAFA (Sudan University of Science and Technology, 2011-05-01)
    The Nuclear Magnetic Resonance Imaging (NMR) system is one of the most important modalities which used in diagnostic of the neuro-diseases. It can detect the small variation within the same type of tissue. The MRI also can ...
  • Technical Viability of Using Differential Gears Mechanism as a Variable Speed Drive 
    Mouzamel, Ahmed Elnour Mohammed; Supervisor ,- Abd Alfattah Bilal (Sudan University of Science and Technology, 2011-01-01)
    Variable speed drive technology has advanced dramatically in the last 10 years with the advent of new power devices and magnetic materials. This has given rise to substantial confusion by users and specifiers of variable ...
  • Implementation of Software Defined Radio (SDR) in Baseband 
    Fadlallah, Imadaldeen Abdalhafeez; Supervisor ,- Moutamn Mirghani Dafalla (Sudan University of Science and Technology, 2011-08-01)
    The ability to support multiple communication protocol is a fundamental feature of Software Defined Radio (SDR). This feature allows SDR to communicate with different radios without need for hardware change. The aim of ...
  • Implementation of OFDM Transceiver using Software Defined Radio Technology 
    Hussein, Ahmed Hussein Fayez; Supervisor ,- Moutman Mirghani Daffalla (Sudan University of Science and Technology, 2011-01-01)
    2UWKRJRQDO )UHTXHQF\ 'LYLVLRQ 0XOWLSOH[LQJ 2)'0 LV D WHFKQRORJ\ ZKLFK KDG SURYHG LWV ZLOOLQJQHVV WR SURYLGH WKH PRVW LQWHUHVWLQJ VHUYLFHV D XVHU PD\ GHVLUH LQ WKH KDUGHVW HQYLURQPHQWV OLNH ZLUHOHVV FKDQQHOV 7KH WKHVLV ...
  • Adaptation of Viscosity Grade System In selection of Asphalt In Sudan 
    Hassan, Seifeldin Akasha Ibrahim; Supervisor ,- Awad Alkarim Mustafa (Sudan University of Science and Technology, 2011-09-01)
    This study reviewed the Viscosity Grading System to be adapted in Sudan. It concerns Engineers, Consultants, Contractors, Suppliers and Local Authorities involved. The Asphalt imported to Sudan from different sources ...
  • Predicting Shear Strength of Reinforced Concrete Beam s ibers W ith and W ithout F iber s U sing A rtificial N eural N etw orks 
    Othman, Amran Mohammed; Supervisor ,- Mahmoud Ahmad Mohammed Khogali (Sudan University of Science and Technology, 2011-10-01)
    Concrete generally is brittle material and having low tensile strength. These undesirable properties have greater effect on the shear behavior of concrete. The shear behavior, shear strength and shear failure mechanism ...
  • DISTANCE PROTECTION OF HIGH Voltag Transmission Line (220 kv ) : Acase Study Jabel Awlia - Rabak Line 
    Abdalwhab, Areej Ahmed; Supervisor ,- Khamis Arbeesh Saad (Sudan University of Science and Technology, 2011-12-01)
    The objective of this thesis is to study and understand the technology and function of the latest developed numerical distance relays with the main focus on the preparation of the relay settings and uploading them in the ...
  • Temperature Controller Design Using Fuzzy Logic 
    Taha, Waleed Ibrahim Mohammed; Supervisor ,- Mohammed Elnour (Sudan University of Science and Technology, 2011-03-01)
    In this thesis an artificial intelligent control method is proposed to design temperature controller suitable for low temperature applications such as laboratory equipments (e.g. ovens and incubators). The proposed design ...
  • Design of a DSP_Based Hndset 
    Mohamed, Ali Ahmed; Supervisor ,- Moutaman Mirghani Daffalla Elbasheer (Sudan University of Science and Technology, 2011-01-01)
    In the present decade, hundreds of digital radios are produced around the world. These radios are utilized with at least one high performance processor, which make them have good communication quality depending on Digital ...
  • Electrical Engery Demand Forecasting In Sudan 2012 - 2030 
    Salih, Salih Babiker Gindeel (Sudan University of Science and Technology, 2011-12-01)
    Demand forecasting is vitally important for the electric industry in the deregulated economy. It has many applications including energy purchasing and generation, load switching, contract evaluation, and infrastructure ...
  • The Finite Element Analysis of Space Trusses by using MATLAB 
    Elhassan, Ahmed Karar Mohammed; Supervisor ,- Fath Alrhaman Mohamed Adam (Sudan University of Science and Technology, 2011-09-01)
    In this study the Finite Element formulation for space trusses was modeled in MATLAB Program Language. The modeled Program named Analysis of Space Truss by using MATLAB Program language (ASTMP). Numerical examples were ...
  • A Design of Computer Interfaced External Sound Card 
    Mohamed, Mohamed Yagoub Abdalla; Supervisor ,- Abd Alrosol Jabbar Alzubaidy (Sudan University of Science and Technology, 2011-06-01)
    This research deals with one of the Digital Signal Processing (DSP) applications and its importance in computer systems and multimedia applications, and that by designing an external sound card for personal computer. This ...
  • SIMULATION OF ELECTROMAGNATIC WAVE PROPAGATION 
    Alhag Moh, Abd alshakuor Abd alrazig; Supervisor ,- Abd Elrasoul Gabar Alzubaidi (Sudan University of Science and Technology, 2011-09-01)
    Search consists of two parts, the first theoretical study of electromagnetic waves and the second computer program that simulates the spread of electromagnetic waves. Part I: The theoretical study of waves of ...
  • Application of Earned Value Method in Large Construction Projects in Sudan 
    Mohammed, El Mutasim Dafa AlGanl; Supervisor ,- Nadir Mohammed Hassneen (Sudan University of Science and Technology, 2011-07-01)
    Feed back is critical to the success of any project. Timely and targeted feed back can enable project managers to identify problems early and make adjustments that can keep a project on time and on budget Earned Value ...
  • SIMULATION OF DISTRIBUTING PROGRAMMABLE LOGIC CONTROLLERS 
    Almdani, Abdelslam abdou fathelrhman; Supervisor ,- Awadalla Taifour Ali (Sudan University of Science and Technology, 2011-10-01)
    Distributed programmable logic control integrated of programmable logic control (PLC) and process controllers of process line into coordinate interactive system. The objective of this research is study theory and structure ...
  • DEVELOPING OF QUALITY CONTROL SYSTEM FOR CEMENT MANUFACTURING USING SOFTWARE TECHNIQUES : Case Study ALSALAM Cement Factory 
    Mohammed, Murtada Mohammed Osman Elshiekh; Supervisor ,- Ahmed Hassan Ahmed (Sudan University of Science and Technology, 2011-02-01)
    The cement material is considered to be one of a great importance in different aspects of building development projects and as a commodity for export and investment. Accordingly, the product should be identical to the ...

Search SUST


Browse

My Account