Bachelor of Engineering: Recent submissions

  • Control a Morphing Trailing Edge 
    Ahmed, Doaa Mohamed Ali; Al-shikh, Esraa Adil Mohamed; Supervisor, Osman Emam- (Sudan University of Science and Technology, 2016-10-01)
    Aircraft designers have been focusing on improving the aircraft flight efficiency, and especially airline companies are anxious to improve the commercial aircraft efficiency nowadays. Usually aircraft wings are designed ...
  • Real implementation of control system for a Quadcopter 
    El Adla, Asem Ahsan Ali; Hanna, Kirullos Amir; Ali, Mohammed Taha Mohammed; Nasir, Odai Abdul-Aziz Ali; Osman, Osama Siraj Mohammed; Supervisor, Osman Muhammad Imam- (Sudan University of Science and Technology, 2016-10-01)
    The control system of UAV represents the heart of the UAV; the ability of UAV to do a certain task is mainly dependent on accuracy of control system inside it. This thesis is a project to build a control system for a ...
  • Composite Material Usage in Aircraft Structure 
    Jalal Eldin, Ahmed Elsayed Ahmed; Alameen, RudwanAlsadig Ahmed; Supervisor, AbdAlraheemSaad- (Sudan University of Science and Technology, 2016-10-01)
    This project studies theoretically and practically the composite materials used in aircraft structure to save the weight resulting from using other materials also by designing a tapered wing span using (CATIA) drawing ...
  • Analysis of Errors in Elevation at Low Level Flight by Using Digital Elevation Model (DEM) 
    Tambal, Alhusain Elsmani; Rahamat Allah, Ismail Mohammed; Mohammed, Mojahed Alhassen; Batran, Nahid Agab Eisa; Supervisor, Ahmed El-Amin Mohammed Ahmed- (Sudan University of Science and Technology, 2016)
    At low-level flight the risk of collision with the terrain increases, due to the importance of it in civilian and military field evenly, the random error for elevation needs to be analyzed; this error is resulting from ...
  • Conceptual Design of Flapping Wing L.A.V 
    Hussein, Hammam Azhary; Omer, Ibrahim Ahmed; Ahmed, Mhamed Ali Jalaldein Mohamed; Sharafaldein, Mohamed Hassan; Alzubair, Sayed Mohmed Alhassan; Supervisor, Mohamed Mahadi- (Sudan University of Science and Technology, 2016-10-01)
    This project presents the Conceptual Design of Flapping Wing L.A.V. Starting from a set of initial design specifications namely: weight, maximum flapping frequency and maximum and minimum velocity of the model. The model ...
  • Automatic Dependent Surveillance – Broadcast Transmitter Analysis 
    Abdallah, Abeer Osman; Mohammed, Ebtehaj Dafallah Ahmed; Gasimalla, Hajer Mohammed; Mohamed, May Mohieldin; Supervisor, Omer Abdel Razag Sharif- (Sudan University of Science and Technology, 2016-10-01)
    This project deals with the acquaint for new aircraft surveillance system: Automatic Dependent Surveillance-Broadcast (ADS-B), which is a technology that can replace early navigation systems which cannot provide surveillance ...
  • Study of the Erosion in First Stage of Axial Flow Compressor 
    Ahmed, EisaEsam Ali; Khalifa, Khalid AbdelrahmanKhider; Ahmed, Mohammed Altayeb Ibrahim; Supervisor, Ali AL Hussein Ahmed- (Sudan University of Science and Technology, 2016-10-01)
    Erosion is a process that describes continuous physical and chemical events which causes soil and rock on the earth’s surface to loosen and move to a new location, the erosion occurred in first stage of compressor which ...
  • Study of blended wing body design concept 
    ABDALLAH, REEM MOHAMMED ABDELGAFFER; HASSAB-ELSEED, SAMAR MOHAMMED EBAID; TAHA, SHOWG IDRIS JAFER; Supervisor, abdelsameea adam- (Sudan University of Science and Technology, 2016-10-01)
    This thesis represents a simple study of the design concept of a new generation of civilian aircrafts called "BLENDED WING BODY" aircraft , which are meant to replace the current cylindrical figure aircrafts in the sooner ...
  • Strategic Fleet Plan for a Sudanese Airline 
    Abd Elhafeez, Elmoez Shams Elddin Satti; Ibrahim, Moawia Abd Elgafar Mohamed; Ahmed, Mohamed Mustafa Mohamed; Supervisor, Elfateh Makki- (Sudan University of Science and Technology, 2016-10-01)
    The problem of how to choose the number and size of aircraft designated airline to perform for years to come that it is a difficult process, needs a lot of knowledge and information and there is a very big risk financially ...
  • Challenge of Using NDT for Composite Materials 
    Mohamed, Mohamed Salah; Ahmed, Mustafa Abdeen Eisa; Elbadawi, Rehab Mohamed; Omer, Salah Eldeen Adfa; Supervisor, Abd Elrheem Saad Omer- (Sudan University of Science and Technology, 2016-10-01)
    This research involves the study of the composite materials its development and usage in the field of aviation industry and knowledge of the properties of these materials and types of defects and damage occur on composites ...
  • Design Optimization and Analysis for A Vertical Flight Technique (Aerodynamic Analysis) 
    Ali, Marwa Abbas Abdel Hamid; Supervisor, Tariq Mohammed Osman- (Sudan University of Science and Technology, 2016-10-01)
    This report is about designing new parts that enable the fighters to perform the vertical flight maneuver depending on the fixed wing lift, with minimum fuel consumption and suitable layout for super maneuverability aircrafts ...
  • Fluid Structure Interaction for Light Aircraft Wing (SAFAT 03) 
    Al-hadi, Faris Ahmed Mohammed; Ahmed, Mosab Adel Mohammed; Supervisor, Researcher. Mohammed Mahdi- (Sudan University of Science and Technology, 2016-10-01)
    This project is made to study the fluid structure interaction for light aircraft wing structure (SAFAT 03 wing structure) that was drawn by CATIA software; in order to know if the requirements of certification are being ...
  • Design optimization for a new vertical flight technique 
    Ali, Zainab Mohamed Osman; Supervisor, Tarig Abu-rass (Sudan University of Science and Technology, 2016-10-01)
    The economy of military aircrafts during mission is very bad, especially at takeoff followed by climb. Also, it is clear that, the value of any military aircraft evaluated by its maneuverability and capabilities. This ...
  • Synthesize of Design of Inertial navigation system (INS) using MEMS sensor 
    abdelfatah, joireya balla; khidir, khidir hamed; hassan, mohamed hashim; tagelsi, mohamed talaat; Supervisor, omer abd elrazag- (Sudan University of Science and Technology, 2016-10-01)
    The purpose of this project is mainly to convey an elementary inertial navigation system, and take advantage of the capabilities that the Micro-Electromechanical system (MEMS) affords. The main aspects cover the simplicity, ...
  • تحسين خط انتاج قسم السلك والمسمار بمصنع صك العملة 
    عثمان, أیمن امیر محمد; الطاهر, بركات حمزة خالد; الفضل, سلیمان عباس ابراھیم; مشرف, الصدیق عبد العظیم- (جامعة السودان للعلوم والتكنولوجيا, 2016-10-01)
    تواجة المصانع والمؤسسات عدد من المشاكل في أثناءعميات الإنتاج المختلفة (منتج-خدمة) مما يؤدي الي فقد في الزمن والمواد الخام المستخدمة ،مما يؤدي الي تقليل نسبة الإنتاج . يوجد في شركة صك العملة نسبة هدر في الزمن في كل من قسمي ...
  • Study of Present Engineering Status of Sudan Railway Corporation (SRC) and Possible Future Enhancements 
    Ahmed, Mogahid Mobark; Ali, Mohammed Abdalhafiz; Hassan, Mosab Mohammed; Adam, Waleed Omer; Supervisor, Alfatih Babiker Mohammed Nabag- (Sudan University of Science and Technology, 2016-10-01)
    The specific objective of the project is to find & suggest applicable schemes for upgrading & rationalizing SRC Business to cater for more transportation capacities up to the end of the first half of the 22nd century. After ...
  • Developing Computerized maintenance management system 
    Mohammed, Khalid Ata Almnan; Ahmed, El-Basheer Mohammed; Abdalgabar, El-Mokashfi Alzain; Supervisor, Wedaat Allah Alamin- (Sudan University of Science and Technology, 2016-10-01)
    Most of factories in Sudan are suffering from reduction in production efficiency which caused by weakness and unorganized production and maintenance management. The optimal solution to increase the efficiency is by documenting ...
  • Design, modeling and simulation of windmill for rural areas 
    Ibrahim, Mohammad Al-Mustafa; Zakaria, Zakaria Hussein; Ameen, Mohamed Ahmed Al; Supervisor, El Siddig Abdelazim Babiker- (Sudan University of Science and Technology, 2016-10-01)
    In this project a wind pump system was designed, modeled and simulated to serve the goal of supporting water harvesting in many of rural areas rather than the efficiency of the system, which in this case the location were ...
  • Development Supply Chain of Information System 
    Saeed, Ahmed Hassan Mohamad; Wanasi, Mohamed Salah Alden; Elhadi, Mohanad Obeid Mohamad; Supervisor, Widatallah Alamin- (Sudan University of Science and Technology, 2016-10-01)
    There is a lack of information sharing within companies nowadays, which results in inefficiency of coordinating actions within the units in the company or organization, The purpose of this project is to build prototype ...
  • دراسه علمية لتأثير إضافة النحاس لسبائك الألمنيوم 
    محمد, علي محمد هارون; زرقان, عاصم ابراهيم محمد خير; عبد الحميد, عبد الحميد الوليد يحي; مشرف, مازن شمس الدين الطاهر (جامعة السودان للعلوم والتكنولوجيا, 2016-10-01)
    تتلخص الدراسة ف التعرف على السبائك بشكل عام ثم التطرق الى سبائك الالمنيوم من ثم دراسة تأثير إضافة النحاس النقي بنسب مختلفة على خصائص الألمنيوم . تمت عمليه الصهر بإستخدام فرن غازي وأجري الفحص الكيميائى للتأكد من دقة نسب ...

Search SUST


Browse

My Account