Bachelor of Engineering: Recent submissions

  • Study of Generation Protection at Garri 4 Thermal Station 
    Ibrahim, Khalid Fathi Mohamaden; Mustafa, Abbas Kamal Mohamed; Alharith, Abdallah Ahmed Ali; Mustafa, Adnan Algaly Alameen; Supervisor, Gaffar Babiker Osman (Sudan University of Science and Technology, 2018-10-01)
    Generators are the most superior unit in power system, it consists of several parts such as stator, rotor and DC excitation system, each one of these parts must be protected from abnormal condition and faults. Several of ...
  • Transmission Line Protection Using Numerical Relay 
    Faroug, Ahmed Abbas Elhaj; Mohamed, Altahir Abass Ahmed; Ibrahim, Mohmmed Ahmed Haroun; Alatta, Muhammad Yassir Nsr Eldeen; Supervisor, -Elfadil Zakaria Yahia (Sudan University of Science and Technology, 2018-10-01)
    The objective of this research to study and understand the technology and function of the latest developed relays with the main focus on the preparation of the relay setting and uploading them in the relays and check correct ...
  • Power Transformers Performance and Tests 
    Ahmed, Ahmed Mohamed Hamid; Aldiy, Monzer Alaa-Aldin Mohamed; Hassan, Mrwan Esam-Aldin Esmat; Abd-Aljalil, Osama Hayder Ahmed; Supervisor, -Salah Eldeen Gasim Mohamed (Sudan University of Science and Technology, 2018-10-01)
    Transformer is one of the most important components and components of the electric power system, which is indispensable in the electrical power system and according to that importance. This study was to analyze the performance ...
  • Study of Short Circuit Faults-Case study Sudanese National Grid 
    Dawood, Alnazeir Hamad Ali; Gebriel, Mohammed Abdelrahman Mohammed; Mohammed, Mohammed Alhadi Balal; Mohammed, Mohammed Jalal Mustafa; Supervisor, -Mohammed Osman Hassan (Sudan University of Science and Technology, 2018-10-01)
    In the previous period, the national grid experienced many changes represented in the addition of Merawi power station and the addition of so many new stations. This extension required the calculation of short circuit ...
  • A Stepper Motor Application in Smart Dish 
    Saleh, Akram Yassir Mohammed Ahmed; Saad, Alamin Omer Alamin; Ahmed, Mohamed Abdulrahman Salih; sir elkhatem, Wael Nasr Eldin; Supervisor, -Gaffer Babiker (Sudan University of Science and Technology, 2018-10-01)
    A stepper motor can be looked upon as a digital electromagnetic device where each pulse input results in a discrete output (i.e. a definite angle of shaft rotation). There are different modes to drive stepper motor such ...
  • Implementation Of Automatic Gun Fighter 
    Ibrahim Abubaker Ibrahim, Amin; Fahmi Ahmed Mohammed Zain, Ahmed; Altyeb Ballal Omara, Mosab; Zainelabdeen Abdallah Mustafa, Tajeldeen; Supervisor, -Gaffar Babiker (Sudan University of Science and Technology, 2018-10-01)
    In classical guard system may need to have more than one person to guard important places in order to increase the scope of the guard, and Keeper could not continuous monitoring all the time for the important places which ...
  • Link Performance Modeling and Simulations for Aeronutical Mobile Airport Communication System(Aeromacs) 
    Mohammed, Alaa Tajelsir Ali; Mohammed, Doaa Magdi Ali; Nuri, Manahil Abubakr Osman; Ali, Nihal Altayeb Mohammed; Supervisor-, Elessaid Sulaiman Saad (Sudan University of Science and Technology, 2017-10-01)
    The aim of this project is to develop the existing communication system in aircrafts and to substitute it with the AeroMACS which is operating at C-Band. To Implement the AeroMACS it is crucial to examine its performance. In ...
  • RE-ENGINING FOR SAFAT-03 
    Ahmed, Ahmed Awadallah; Hussain, Mohamed Azhary; Mohamed, Mohamed Abdallah; Salih, Ebrahim Ayoup Mohamed; Supervisor-, Mohamed Mahdi (Sudan University of Science and Technology, 2017-10-01)
    The engine is one of key factors to increasing the performance and improving the economics of aircraft. The most recent phenomenon in the industry, again engine driven, is a growing importance placed on the re-engining of ...
  • Wind Tunnel Investigation of Propeller Characteristics and Wing-Propeller Interaction 
    Gmoan, Mazin Eltaher Gbash; Mousa, Mohammed Elnor Mohammed; Al-husaini, Mohammed Yahya Ali Ahmed; Ahmed, Thoyba Abdulrahman Mohammed; Supervisor-, Intisar Abdel Fattah Mohammed Khattab (Sudan University of Science and Technology, 2017-10-01)
    The main goal of this project is to review the mechanisms and describe the phenomena that play a role in the aerodynamic interference between the propeller and a wing. Therefore, the characteristics of the isolated propeller ...
  • Manufacturing Technology of Composite Material Structure 
    MUSTAFA, ELSADIG HAIDER BASHRA; HAMID, MANSOR IBRAHIM MANSOR; IBRAHEEM, MARWA FATHI ELTAHER; OMER, OMER AHMED MOHAMMED; Supervisor-, ABD ALRAHIM SAAD OMER (Sudan University of Science and Technology, 2017-10-01)
    This project aims to manufacture an aileron for SAFAT 01 by using composite material (carbon/epoxy) and analyze the structure in order to reduce the high weight due to using other materials. This model sketched by using ...
  • Study of Using Plasma Welding techniques in A/C Parts Instead of Riveting 
    Elamin, Elhibir Rahmtalla Abdelgadir; Seidahmed, Khalid Salah-Eldeen Sir-Elkhatim; Bushara, Mohamed Faroog Mohamed; Supervisor-, Abdulraheem Saad Omer (Sudan University of Science and Technology, 2017-10-01)
    This research aimed to study the plasma welding technology in aircraft structure instead of riveting, and prove that using plasma welding leads to noticeable reduction in aircraft weight, and offers better strength ...
  • Implementation of a Quadcopter Control System 
    Abu Arki, Al-Baraa Omer Mohammed; Idrees, Mohammed Saif El-Deen Ibraheem; Abbas, Muzammil Mohammed Muzammil; Supervisor-, Khidir Tay Allah Yousif (Sudan University of Science and Technology, 2017-10-01)
    The control system of a quadcopter is the most important part. Control system governing quadcopter stability and control movement by correcting measurement errors and comparing to the desired values achieving pilot desired ...
  • Engine Failure During Takeoff In Twin Engine A/C 
    Sougy, Ali yousif Saleh; Hmed, Anas Yousif Ahmed; Osman, Moawia Balla Khalafalla; Supervisor-, ALI ALHASEEN AHMED (Sudan University of Science and Technology, 2017-10-01)
    This project study the condition of twin engine air craft during takeoff , at one engine failure ,This causes several negative effects on A/C, in addition to the loss of engine thrust ,the performance and stability are ...
  • UAV Pitch Control System Analysis and Design 
    zomrawi, Ahmed Mohammed; Mohammed, Mazin saif aldeen Yosef; jedo, Mashaer Ibrahim Mustafa; Supervisor-, Ishraga Adzharia (Sudan University of Science and Technology, 2017-10-01)
    The ability of UAV to do a certain task is mainly dependent on accuracy of its control system. The purpose of this project is to analyze and design pitch control system for the UAV model in short mode, Too long settling ...
  • Study of Refractory Materials Usage in Aerospace Engines Technology 
    Manna, Ali Hafiz Omer; Mohammed, Mazin Ahmed Ali; Ahmed, Mohamed Elsir Elkhider; Ali, Mussab Omer Elsir; Supervisor-, Abdalrahem Saad Omer (Sudan University of Science and Technology, 2017-10-01)
    When engine parts are subjected to a high temperature, their life time and performance will reduce due to the defects result from that high temperature. This report shows the definition of refractory materials, its ...
  • Structured Robust Control for a Hang Glider 
    Mohammed, Fatimah AL-Tayib Abduallah; Abdulrahman, Zahra Ibrahim Jalabi; Supervisor-, Elfatih Guma Hamdi Gubara (Sudan University of Science and Technology, 2017-10-01)
    No one can deny the significant role of gliders in founding the aviation industry, so far in its evolutionary progress. Gliders are eco-friendly as they exploit the energy from the atmosphere from mother nature without ...
  • Study of an Instrument Landing System 
    Dafa-alla, Ibrahim Ali Ibrahim; Osman, Israa Omer Mohamed; Mohamed, Mustafa Abed Elgalil Gobara; Elsafi, Zubaida Mohamed Hussein; Supervisor-, Ahmed Awad Ahmed Babiker (Sudan University of Science and Technology, 2017-10-01)
    The rapid increase in aviation industry requires parallel effective plans, programs and designs of systems and facilities nationwide to fulfill the increasing needs for safe air transportation. Aircraft landing remains a ...
  • دراسة إمكانية تثبيت تربة مقلع حطاب باستخدام الجير الحي 
    الطاهر, احمد عبدالرحيم احمد; محمد, عبادة الطيب عبدالحكم; كرداش, مزمل محي الدين الطاهر; مشرف-, جودة الله عثمان (جامعة السودان للعلوم والتكنولوجيا, 2017-10-01)
    يهدف هذا البحث إلى دراسة إمكانية إستخدام الجير الحي في تثبيت تربة مقلع حطاب. لقد تم أخذ عينات من المقلع وتم عمل إختبارات عليها )إختبار التدرج الحبيبي, إختبار حدود القوام, إختبار الدمك, إختبار نسبة تحميل كاليفورنيا(. أكدت ...
  • الاثاثات المرورية واثرها علي السلامة 
    السید, ابراھیم محمد ابراھیم قسم; عبداللطیف, احمد بدرالدین عمر; السید, محمد صلاح الدین محمد; مشرف-, عبدالله عبدالرحمن الفادني (جامعة السودان للعلوم والتكنولوجيا, 2017-10-01)
    في هذا البحث تم دراسة طرق ولاية الخرطوم لمعرفة مواصفات القصور والضعف فيها وماتحتاجه من صيانة وإضافات وتحديثات حيث تم حصر كل البيانات المطلوبة للحوداث المرورية بولاية الخرطوم خلال عشرة سنوات من العام (2004) إلى العام ...
  • مقارنة بين الاساس المفرد والخازقى من حيث التكلفة : دراسة حالة مبني من ثلاث طوابق الخرطوم بحري – كافوري 
    داؤود, اسراء ابو قور علي; حامد, حليمة حامد محمود; جمعة, مصعب طة حمد; مشرف-, محمد احمد الحبيب (جامعة السودان للعلوم والتكنولوجيا, 2017-10-01)
    من خلال الدراسة تم عمل مقدمة عن جميع الاساسيات عموما وتبن انواعها بشكل عام ومن ثم تم التحديث عن الاساسات الخازوقية والمفردة علي وجة الخصوص ودراستها وعمل تصميم لها وحساب كميات وتقديرات لكل من الاساس المفردة والخازوقي والمقارنة ...

Search SUST


Browse

My Account