Design, Fabrication and Testing of Thermistor Detector

Maruod, Abbas Babiker Ali; Supervisor, - Kasim M. Al-Hity 
Co - Supervisor, -  Yahia Abdulla Mohamed

dc.contributor.author	Maruod, Abbas Babiker Ali
dc.contributor.author	Supervisor, - Kasim M. Al-Hity Co - Supervisor, - Yahia Abdulla Mohamed
dc.date.accessioned	2013-12-09T08:23:40Z
dc.date.available	2013-12-09T08:23:40Z
dc.date.issued	2006-03-01
dc.identifier.citation	Maruod , Abbas Babiker Ali . Design, Fabrication and Testing of Thermistor Detector / Abbas Babiker Ali Maruod ; Kasim M. Al-Hity, Yahia Abdulla Mohamed .- Khartoum : sudan university of scince and technology , Institute Of Laser , 2006.- 63 p. : ill ; 28cm .- M.Sc.	en_US
dc.identifier.uri	http://repository.sustech.edu/handle/123456789/2689
dc.description	Thesis	en_US
dc.description.abstract	Abstract The main idea of this thesis is to design and fabricate an infra-red detector, specially the disk type of NTC thermistor. And to test it’s operation and response to different levels of laser power . The challenge of the fabrication arise from the chemical, physical and electronic thermistor features. In order to get perfect and good response, a certain semiconductor oxides ratio prepared and milled with special size and shape under tones of pressure. Then sintered above thousand of temperature degrees, and finally coated and attached with the legs to get the thermistor. An electronic circuit consist of some amplifiers, comparator and reference voltage was used to test the disk thermistor operation. Finally different levels of Nd:YAG laser power were used to test the fabricated thermistors. The results are very promising and the best ratios of the mixture could be easily determined. ‫‬ ‫ ‫‬ ‬	en_US
dc.description.sponsorship	Sudan University Of Science and Technology	en_US
dc.language.iso	en	en_US
dc.publisher	sudan university of scince and technology	en_US
dc.subject	NTC thermistor	en_US
dc.subject	semiconductor oxides	en_US
dc.subject	amplifiers	en_US
dc.subject	Nd:YAG laser	en_US
dc.title	Design, Fabrication and Testing of Thermistor Detector	en_US
dc.type	Thesis	en_US