1. SUST Repository
  2. Theses and Dissertations
  3. College of Engineering
  4. Masters Dissertations : Engineering
Please use this identifier to cite or link to this item: https://repository.sustech.edu/handle/123456789/7941
Full metadata record
DC FieldValueLanguage
dc.contributor.authorIbrahim, Nadir Abdalrazig Siddige
dc.contributor.authorSupervisor - Elkhawad Ali Elfaki
dc.date.accessioned2014-11-11T07:20:28Z
dc.date.available2014-11-11T07:20:28Z
dc.date.issued2010-04-01
dc.identifier.citationIbrahim,Nadir Abdalrazig Siddige.Rehabilitation of the Control Unit of the CNC Milling Machine : Model F-V0-A2F/Nadir Abdalrazig Siddige Ibrahim;Elkhawad Ali Elfaki.-Kartoum:Sudan University of Science and Technology,College of Engineering,2010.-127P. : ill. ; 28Cm.-M.Sc.en_US
dc.identifier.urihttp://repository.sustech.edu/handle/123456789/7941
dc.descriptionThesisen_US
dc.description.abstractThe control unit of model F-V0-A2F milling machine that belongs to the Mechanical Engineering Department of Sudan University of Science and Technology was rehabilitated. The control unit under study controls the motion of the stepper motors driving the linear axis X, Y, Z, in addition to the spindle motor and the coolant system, via a programmed typed through its key boards. The power supply and the stepper motors driving circuits were replaced by those obtained from a crippled lathe machine. Anew control cabinet was build. MACH3 software was configured and used as an interfacing program. The rehabilitated milling machine was tested and found to perform nicely.en_US
dc.description.sponsorshipSudan University of Science and Technologyen_US
dc.language.isoenen_US
dc.publisherSudan University of Science and Technologyen_US
dc.subjectMechanical Engineeringen_US
dc.subjectMechanical Engineering - productionen_US
dc.subjectMilling Machineen_US
dc.subjectModel F-V0-A2Fen_US
dc.subjectControl Uniten_US
dc.titleRehabilitation of the Control Unit of the CNC Milling Machine : Model F-V0-A2Fen_US
dc.title.alternativeإعادة تأهيل وحدة تحكم لماكينة تفريز ذات تحكم رقمي(ماركة F-V0-A2F)en_US
dc.typeThesisen_US
Appears in Collections:Masters Dissertations : Engineering

Files in This Item:
File Description SizeFormat 
Rehabilitation of the Control Unit ...pdftitle41.74 kBAdobe PDFView/Open
ABSTRACT.pdfABSTRACT156.53 kBAdobe PDFView/Open
CHAPTER TWO.pdf
  Restricted Access		CHAPTER 823.33 kBAdobe PDFView/Open Request a copy
chapter three.pdf
  Restricted Access		CHAPTER 496.23 kBAdobe PDFView/Open Request a copy
CHAPTER FOUR.pdf
  Restricted Access		CHAPTER 608.01 kBAdobe PDFView/Open Request a copy
CHAPTER FIVE.pdf
  Restricted Access		CHAPTER 1.3 MBAdobe PDFView/Open Request a copy
CHAPTER SIX.pdf
  Restricted Access		CHAPTER 46.07 kBAdobe PDFView/Open Request a copy
CHAPTER ONE.pdf
  Restricted Access		CHAPTER 67.34 kBAdobe PDFView/Open Request a copy
APPENDIX.pdfAPPENDIX721.99 kBAdobe PDFView/Open
REFERENCES.pdfREFERENCES57.59 kBAdobe PDFView/Open
Show simple item record


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.