SUST Repository

Optimization Of Machining Processes Through Simulation Using CAD\CAM – An Application Study

Show simple item record

dc.contributor.author Adam, Hamid Abdallah bakar
dc.contributor.author Supervisor - Elkhawad Ali Elfaki
dc.date.accessioned 2014-12-03T12:55:45Z
dc.date.available 2014-12-03T12:55:45Z
dc.date.issued 2013-11-01
dc.identifier.citation Adam , Hamid Abdallah bakar , Optimization Of Machining Processes Through Simulation Using CAD\CAM – An Application Study / Hamid Abdallah Abakar Adam ; Elkhawad Ali Elfaki .-Khartoum :Sudan University Of Science And Technology,College of Engineering,2013 .-86P:ill;28Cm.-M.Sc. en_US
dc.identifier.uri http://repository.sustech.edu/handle/123456789/8522
dc.description Thesis en_US
dc.description.abstract Optimization of NC technology rests in selection of one optimal variant from several possible. Variant theoretically solved in CAD/CAM systems with aid of NC module of CAD/CAM system and module for simulation and verification of NC data minimizes costs of their creation and verification and brings qualitative basis for optimizing and decision process. This all then goes towards serious decreasing of costs and work expenditure not only in technology, but to costs decreasing of NC data debugging too. In this research two products, namely, a plunger fixture and clamp fixture, were produced using CAD\CAM techniques with an optimization module. The machining time for the plunger fixture is conventional milling machining with a copy attachment was calculated , theoretical and found to be equal to 10.687 hour . This time is must longer than the time taken to machine the clamp fixture using optimized CAD\CAM techniques IT took about 1.5 hour. to product the part using CAD\CAM . en_US
dc.description.sponsorship Sudan University of Science &Technology en_US
dc.language.iso en en_US
dc.publisher Sudan University of Science &Technology en_US
dc.subject Machining Processes en_US
dc.subject Using CAD\CAM en_US
dc.title Optimization Of Machining Processes Through Simulation Using CAD\CAM – An Application Study en_US
dc.title.alternative امثلة عمليات التشغيل من خلال المحاكاة باستخدام التصميم و التصنيع بالحاسوب- دراسة تطبيقية en_US
dc.type Thesis en_US


Files in this item

This item appears in the following Collection(s)

Show simple item record

Share

Search SUST


Browse

My Account