Scientific journals: Recent submissions

  • Osman , Izzelddin Mohammed; Saeed , Rashid Abdelhaleem (Sudan University of Science and Technology, 2015)
    TOC
  • Abdelhaleem, Rashid Abdelhaleem Saeed (Sudan University of Science and Technology, 2014)
    JECS
  • Hussein, Rashid Ahmed Mohammed; Mohamed , Sumya Abdelmoneim; Elemam , Abusabah.E.; Alhassan , Adil.A. (Sudan University of Science and Technology, 2014)
    This study was carried out to assess the rheological properties and filtration loss for a drilling fluid prepared from local bentonite. Required data and sampleswere carfelluy gathered from the study area(Al-fao area) in ...
  • Khalif , Adam Khalifa Mohammed; Ebrahim , Abbas Abdalla; Elhassan , Elsadig Elhadi (Sudan University of Science and Technology, 2014)
    Kassala Town is frequently inundated by the Gash River. The flood of 2003 caused great damages and extensive losses of lives, resulting in an estimated loss of 575 million U.S.Dollars.The main objective of this study is ...
  • Adli, Masoud Gamiel Ahmed; Yousif , Yousif Ali (Sudan University of Science and Technology, 2014)
    Based on experimental work, the effect of pH on heterotrophic bacteria enumeration was studied in batch cultures tests conducted under different chromium concentrations. Samples were collected from the effluent of the ...
  • السلامى ، قصى حميد; رؤوف ، احمد محمد (جامعة السودان للعلوم والتكنولوجيا, 2014)
    تناقش هذه الورقه البحثية كيفية اعداد وعمل الخوارزمية جديدة لجدوله مهام متعدد المعالجات اسوه بيقيه خوارزميات الجدوله ومن ثم العمل على محاكاة عمل ذلك الخوارزمية بالاعتماد على احدى نماذج نظرية صفوف ...............
  • Abbas, Abdelaziz Yousif Mohamed; Kalcon, Giddani Osman Addlan; Sidahmed , Abubaker H. (Sudan University of Science and Technology, 2014)
    The effect of static synchronous compensator (STATCOM) installed at transmission line on the performance of distance protection is investigated in this paper. The paper explores an apparent impedance calculation procedure ...
  • Abdelhaleem , Rashid Abdelhaleem Saeed (Sudan University of Science and Technology, 2014)
    Cover Page
  • Haroun , Hago Elfadil; Amin , Hala Hashim (Sudan University of Science and Technology, 2014)
    This study was conducted to identifythe Sudanese foot shape and anatomy as it is necessary in the field of foot wear industry and to study the determinant factors affecting the shape of Sudanese foot for citizens dwelling ...
  • Salim, Hashim Ali Mohamed (Sudan University of Science and Technology, 2014)
    A series of experiments was carried out on Picanol (president) loom in order to study the effect of loom speed and shed height on the beating – up force. The mathematical model of warp threads mechanics established by the ...
  • Mayo , Masoud Gamiel Ahmed Adli,A. W. (Sudan University of Science and Technology, 2013)
    Bacteria play an important role in oxidation and stabilization of organic and inorganic matter in wastewater treatment plant. This paper presents the development of mathematical model to study the effect of chromium on ...
  • Mohyadinn , Maysara Eissa (Sudan University of Science and Technology, 2013)
    In this paper, laboratory work has been carried out using samples of Sudanese crude (Nile blend) in order to describe its rheological behavior at different flow and thermal conditions, and hence, identifying the temperature ...
  • Mohamed , Abd Elhakam Etayeb; Dahab , Mohammed, A.H .; Yagoub , Abbas M. (Sudan University of Science and Technology, 2013)
    Geoelectric investigation for groundwater in Abu Habil water shed, northern Kordofan and it’s environ was done using the Vertical Electrical Sounding (VES) method. Twenty two vertical electrical soundings data were acquired ...
  • Ahmed, Aamir Hashim Obeid (Sudan University of Science and Technology, 2013)
    Direct Current (DC) motors have been extensively used in many industrial applications. Therefore, the control of the speed of a DC motor is an important issue and has been studied since the early decades in the last century. ...
  • Elfaki , Elawad F.; Ibrahim , Eshag A. (Sudan University of Science and Technology, 2013)
    This paper deals with the significances and changes that may take place if we start to search for a new means and ways to produce and use our clothes, use different types of fibers, change the conventional and old farming ...
  • Fattah , Khalid . Abdel (Sudan University of Science and Technology, 2013)
    A model of atomic structure is presented. Many questions that have baffled scientists for the past decades may be answered by this visualized mathematical model. In particular, the model mathematically relates the properties ...
  • Gasmelseed , E . Tambal ,G .A. (Sudan University of Science and Technology, 2013)
    Over the years, treatment of tannery waste-Water put a considerable burden on the total cost of production, be it pickled, in wet-blue, crust or finished leather. After 1980 a very stringent regulation has been imposed on ...
  • Abbas, Abdelaziz Yousif Mohamed; Kalcon , Giddani O. A. (Sudan University of Science and Technology, 2013)
    This paper investigates the uses of battery energy storage system (BESS) in ac networks highly populated with wind power generation. The investigation includes power system load levelling, frequency stabilization, and ...
  • Abosinaina , Abdelrahim Mobarak; Salih ,Sabir Mohamed (Sudan University of Science and Technology, 2012)
    This study aimed to convert the operation of Soba circular kiln, the top-fired one, with the suction of hot gases up-wards (upper- draught kiln), to the way of suction of heat down-wards (down-draught kiln) in order to ...
  • Haroun , Ahmed E.; Loghman , Adil H. A.; Mahmoud , Salma Y. M . (Sudan University of Science and Technology, 2012)
    In construction projects, project execution time is a major concern of the involved stakeholders (client, contractors and consultants). Optimization of project scheduling through time control is considered as a critical ...

Search SUST


Browse

My Account