Masters Dissertations : Engineering: Recent submissions

  • Potential of Remote Sensing and GIS Techniques in soil Classification mapping: : Case study of Northern Sudan Soil 
    Mohamed, Nashwa EL Tigani Ahmed; Supervisor ,- Khalid Abdelrahman Elsayed (Sudan University of Science and Technology, 2012-02-01)
    During the last few years, site investigations have been an important aspect to the civil construction such as dams, towers, bridges …etc. It has been a challenge to find the most appropriate technique for studying soil ...
  • Lightweight Inter-Cluster Synchronization Scheme for Femtocell Network 
    Hasab Alla, Omnya Abdel Rahman; Supervisor ,- Rashid A. Saeed (Sudan University of Science and Technology, 2012-12-01)
    A femtocell is a small cellular base station recently developed which designed for use in residential or small business environments. Femtocell technology has drawn considerable attention as a cost-effective mean to improve ...
  • DESIGN OF POLE PLACEMENT CONTROLLER FOR INVERTED PENDULUM SYSTEM 
    AHMED, ASMA AHMED HASSAN; Supervisor ,- ABDALLAH SALIH ALI (Sudan University of Science and Technology, 2012-12-01)
    The inverted pendulum is a common, interesting control problem that involves many basic elements of control theory. The inverted pendulum system is an under actuated, unstable and nonlinear system. Therefore, control ...
  • تقويم اداء محطة سوبا لمعالجة مياه الصرف الصحى بالخرطوم 
    فرح, سوسن محمد خليل; مشرف ،- سعيد محمد أحمد النورابي (جامعة السودان للعلوم والتكنولوجيا, 2012-05-01)
    هدف البحث إلي دراسة وتقييم أسباب تردي كفاءة عملية المعالجة بمحطة سوبا ومعرفة ومراعاة الإعتبارات التصميمية والإقتصادية والبيئية والصحية عند إختيار موقع محطة المعالجة. اتبعت الدراسة المنهج الوصفي و إعتمدت على عدة مصادر ...
  • الهياكل التنظيمية والوصف الوظيفى فى صناعة التشييد بالسودان : مسح ميدانى 
    البشير, الأمين بشير أحمد; مشرف ،- نادرمحمد حسنين (جامعة السودان للعلوم والتكنولوجيا, 2012-12-01)
    على الرغم من أن أهمية الهيكل التنظيمى الوظيفى (FOS)، وتحليل وتصميم الوظيفة (J.A.D.) واضحة لجميع المسؤولين والمهتمين، لا يزال هناك نقص أو حوجة لعمل طرق أو دليل اجرائى مرجعى لتصميم FOS وJ.A.D. وعلى ذلك تظهر أهمية هذا البحث ...
  • ‫تقويم درجة الاهتمام باختبارات ضبط الجودة الخرسانية‬ ‫في صناعة التشييد في السودان : ‫ولاية الخرطوم نموذجا‬‬ 
    عبد االله, ‫عبد االله ادم ‬; مشرف ،- نادر محمد حسنين (جامعة السودان للعلوم والتكنولوجيا, 2012-01-01)
    ‫مستخلص البحث‬‫إن التطور و التسارع الكبيرين الذين تشهدهما صناعة التشييد، يوضحا مدي‬ ‫احتياجات العصر من الطرز المعمارية المعقدة الأشكال والمتعددة الوظائف والتي تتطلب‬ ‫الفحص و التدقيق في المواد المستخدمة و طرق الإنشاء. ...
  • دراسة تحليلية لواقع الإشراف الفني على المشاريع الانشائية في السودان 
    خالد, ميمان محمد; مشرف ،- صالح الهادي محمد أحمد (جامعة السودان للعلوم والتكنولوجيا, 2012-07-01)
    في هذا البحث تم القيام بعمل دراسة لواقع الاشراف الفني على مشاريع التشييد بالسودان لما لهذا الجانب من أهمية وأثر بالغ في نجاح مشاريع التشييد وتطور في صناعة التشييد في السودان . ...
  • دراسة مقارنة بين الممارسة السودانية والاتحاد الدولى للاستشارات الهندسية 
    على, سيف الدين ابراهيم; مشرف ،- نادر محمد حسنين (جامعة السودان للعلوم والتكنولوجيا, 2012-06-01)
    لا يخفى على احد الأهمية القصوى لإدارة العقود الهندسية ، حيث أن صناعه التشييد عمليه استراتيجيه للبلدان النامية والمتطورة على السواء ، ومن هنا برزت أهميه العقود الهندسية في تنظيم وتطوير هذه الصناعة . وجاء هذا البحث لعكس ...
  • A study of Under-frequency Load Shedding Scheme : National Grid Model 
    Ahmed, Anas Elsayed Elemam; Supervisor ,- Khamis Arbeesh Saadeldin (Sudan University of Science and Technology, 2012-04-01)
    This research deals with the operation of Under-Frequency Load Shedding (UFLS) scheme during contingency period of the National Grid. The National Grid is modeled by using ETAP 7.0 software which is a modern electrical ...
  • Identifications of Temperature Control System Using Artificial Neural Network 
    Alzobair, Waleed Mohamed; Supervisor,- Awadalla Taifour Ali (Sudan University of Science and Technology, 2012-01-01)
    The aim of this study is to identify the temperature control system by using artificial neural networks. A simple temperature system was built, and then proportional integral derivative (PID) controller was implemented. ...
  • DESIGN OF AIRCRAFT LANDING CONTROL SYSTEM USING FUZZY LOGIC 
    Ahmed, Elnail Kamal Eldin Idris; Supervisor ,- Awadalla Taifour Ali (Sudan University of Science and Technology, 2012-01-01)
    Since the Climate factors have strong negative effect on the process of landing, which makes crew needs a proper automatic landing system, to reduce the total landing cost by landing the aircraft at prescribed time. This ...
  • Automated Teller Machine control by voice 
    Elhag, Mona Hasan Mohammed; Supervisor ,- Abd-el-rasool Gabar Alzebidy (Sudan University of Science and Technology, 2012-01-01)
    This Research describes and simulates the implementation of speech recognition authentication in the ATM (Automated teller machine) to control the access, payment, and to reduce the number of claims involving fraudulent ...
  • Design on 220 V/50 HZ Interter For 15 HP Pump 
    TAHA, AMNA BABIKIR MOHAMED AHMED; Supervisor ,- ABDALLAH SALIH ALI (Sudan University of Science and Technology, 2012-12-01)
    Water pumps are widely used in agricultural fields. One of the most serious problems that faces the process of irrigation is providing electrical power to feed the pump. Because most of the agricultural fields are in ...
  • Analysis of Torsional Vibration In Rotating Machine 
    Khalifa, Ammar Abdelrhim Elnour; Supervisor ,- Tag Elsir Hasn Hassan (Sudan University of Science and Technology, 2012-04-01)
    Industries worldwide are rapidly developing advanced complex machinery. One area that must be considered in these engineering systems is the rotating machines torsional vibrations. Hence it can lead to early failure and ...
  • Application of STATCOM in Power Quality Improvement 
    Hamid, Hashim Hasabelrasul Abdallah; Supervisor ,- Abdelaziz Yousif Mohamed Abbas (Sudan University of Science and Technology, 2012-03-01)
    This thesis studies the application of static synchronous compensators, STATCOM, in power quality improvement. The STATCOM has been mainly used to enhance the stability of electric power systems. The 48-pulse STATCOM system ...
  • FLOW CONTROL SYSTEM USING FUZZY LOGIC 
    EBRAHEEM, ALAMEEN KAMAL ABDALHY; Supervisor,- Awadalla Taifour Ali (Sudan University of Science and Technology, 2012-03-01)
    This study investigates the control of liquid level of flow control system Proportional-integral-derivative controllers were used in this study as a control strategy. Optimum control setting has been determined ...
  • Flame Photometer Quality Control 
    Mohammed, Rashad Abdullah Ahmed; Supervisor ,- Alnazier Osman Mohamed Hamza (Sudan University of Science and Technology, 2012-01-01)
    Many critical patient-care decisions are based on results supplied by the clinical laboratory produced by means of the clinical laboratory instruments like flame photometer which is used to determine the proportion of ...
  • Comparison of Power System stabilizers Between Merowe Dam and Dr.Mahmoud Sharif Power Plants 
    Faroug, El-hag Abbas El-hag; Supervisor ,- Khamis Arbeesh Saad EL-din (Sudan University of Science and Technology, 2012-02-01)
    Control of excitation system is well known as one of the effective means to enhance the overall stability of electrical power systems. Present day excitation systems predominantly constitute the fast acting AVRs. A high ...
  • Performance Evaluation of Security Management System in Vehicular ad Hoc Networks 
    Mohamed, Sara Babeker; Supervisor ,- Ibrahim khider (Sudan University of Science and Technology, 2012-12-01)
    Networking in vehicles is a promising approach to facilitate road safety, traffic management, and infotainment dissemination for drivers and travelers. Hence it becomes essential to provide security services such as ...
  • Design an Intelligent Control System for Elevators 
    Ali, Tayseer Mohamed Saif Adeen; Supervisor ,- Mohamed Elnour AbdAlla (Sudan University of Science and Technology, 2012-09-01)
    Intelligent controlled systems are invented to solve problems that the traditional control couldn’t solve it or it can be solved with a complex solution. Intelligent control systems have many parts, one of them is fuzzy ...

Search SUST


Browse

My Account