Masters Dissertations : Engineering: Recent submissions

  • MICROCOMPUTER SYSTEM EXPANSION BY USING PPI TECHNIQUE 
    ZAHRAN, ZAIN ELABDEEN ABD ALLA HAJ AHMAD; Supervisor - ABD ALRASOOL JABAR ELZEBIDI (sudan university of science and technology, 2005-01-10)
    The main objective of the research is to enhance the capability of the computer to manage greater parallel input and output. This increase in parallel in and out is necessary when dealing with systems, which enhances the ...
  • Power Flow Control Using Thyristor Controlled Series Capacitor (TCSC) 
    Osman, Bahreldin Suliman Mohammed; Supervisor - Khamis Arbeesh Saadeldin (sudan university of science and technology, 2008-07-10)
    This dissertation deals with the control of power flow in electrical power systems. During the last few years interest in the possibility to control the active power flow in transmission systems has increased significantly. ...
  • APPROACH RADAR DISCIPLINE SIMULATION 
    Bushara, Nadia Elfadul; Supervisor - Alrasoul Jabar Alzubaidi (Sudan University of Science & Technology, 2008-06-10)
    Radar is one of the major applications of electronics and electromagnetic. Its development has been stimulated primarily by military needs for surveillance, navigation, and weapon control, but it is widely employed in many ...
  • Global Positioning System Errors Magnitude And Effects 
    Gad Alla, Taha Hamed Guma'a; Supervisor - Mohamed. A .Khalid (Sudan University of Science & Technology, 2010-10-01)
    The error sources in GPS and inconsistencies between reference datum of the system and physical reality more or less disturb its performance as a geodetic measurement technique. Today numerous scientific studies are carried ...
  • Investigation and Redesign of Power Distribution Network at Academy of Gezira : Neshaisheba Campus 
    Bashir, Hiba Adam Abbakar; Supervisor - KHAMIS ARBEESH (Sudan University of Science & Technology, 2010-12-01)
    The presently described study concerned the problem of power distribution system network design. As a special case, the work was concentrated on a study of the investigation and redesign in university of Gezira campus. ...
  • dies An Optimum Measuring Technique for Custody Transfer Meter in the Oil Field 
    Mohammed, Ashraf Nour Eldin Hassan; Supervisor - Eisa Bashier Mohammed (Sudan University of Science and Technology, 2008-09-10)
    Flow measurement is vital to many industrial sectors, such as water supply, oil extraction, gas distribution and much of the processes and pharmaceutical industry, which depend on flow meters for quality control and ...
  • Implementation of Constructability Concepts in Sudan 
    Asad, Awad Elseed Musa; Supervisor - Salma Yahia Mohamed (Sudan University of Science & Technology, 2008-06-10)
    The objectives of this study are to convey the concepts and practice of implementing constructability to Sudan, measure the level of awareness about it, provide guide lines for local construction practitioners who would ...
  • Peripheral Component Interconnect Bus (PCI) Manipulation 
    Elsuni, Hafiz Ibrahim Mahmoud; Supervisor - Hafiz Ibrahim Mahmoud Elsuni (Sudan University of Science and Technology, 2008-04-10)
    Major concepts of the computer buses were explained in this research. Features and characteristics for each type of these computer buses besides their development along with different computer generations were discussed. ...
  • Theoretical Experimental and Computational Fluid Dynamics Analysis of Hydromatrix Turbine : A Study on Jebel 
    Alnour, Mohyedin Ahmed Abdelghadir Mohamed; Supervisor - Sabir Mohammed salih; Co-Supervisor - William Ibrahim Asaad (Sudan University of Science and Technology, 2010-02-01)
    The purpose of this study is both to further optimize the investigation and to improve the hydromatrix turbine performance (Jebel Aulia Dam). Optimization of the turbine efficiency has been made by the analysis of the ...
  • Development of Smart Microcontroller by Using Zigbee Wireless Technology 
    Supervisor - Saad Da’ood Alshama (Sudan University of Science and Technology, 2010-08-01)
    The adoption of wireless communications based on Low-Rate Wireless Personal Area Network ZigBee technology (designed to control and monitoring in real time) in civil and industrial applications has increased rapidly in ...
  • USE OF FAST TRACK TASK FORCE FOR PROJECT MANAGEMENT 
    Eltayeb, Omer Ibrahim Ahmed; Supervisor - Nadir Hasanain (Sudan University of Science and Technology, 2010-10-01)
    The purpose of this research is to find a solution to some problems and obstacles that occur during the project life cycle. Which in turn lead to delays in the project and increase in cost. Some information and facts were ...
  • SIMULATION OF IMPULSE VOLTAGE GENERATOR CRCUITS FOR TESTING HIGH VOLTAGE EQUIPMENT 
    AHMED, MOHAMED HASSAN ELFAKI; Supervisor - خميس أربيش سعد الدين (Sudan University of Science and Technology, 2006-11-01)
    It is essential for electrical power engineers to reduce the number of outages and preserve the continuity of service and electrical supply Therefore it is necessary to direct special attention towards the protection of ...
  • Deformation Analysis 
    Yousif, Osama A.Rahman Adam; Supervisor - A.H. Fagir (Sudan University of Science and Technology, 2006-04-01)
    More than one century has elapsed since Gauss and Legendre developed the least squares method. Since that time many improvements have been introduced to the original work of these two great scientists. The method rapidly ...
  • Softswitch DESIGN 
    HASSAN, AHMED HASSAN MOHAMMED; Supervisor - ABD ALRASOL JABAR ALZUBAIDY (Sudan University of Science and Technology, 2006-08-01)
    Through this research the promotion and development of the switches starting from manual switch and ending with optical switch have been known. The research explains the most important characteristic of the switches and ...
  • DESIGN OF A SEQUENTIAL CONTROL SYSTEM FOR INDUSTRIAL AUTOMATION 
    AHMED, MORTADA EL AMIN ABDELLA; Supervisor - ABD AL RASOOL JABAR ALZEBIDY (Sudan University of Science and Technology, 2006-06-01)
    Sequential systems are commonly found in industrial automation. This type of systems can be represented by discrete state space where changes in state are caused by occurrences of events. Sequential system can be categorized ...
  • Proportions of an axial Wind Turbine to be used in North of Sudan 
    ALfaki, Badri Mohamed; Supervisor - William Ibrahim Asaad (Sudan University of Science and Technology, 2006-01-01)
    This study has been carried out to exploit the wind energy to lift water from deep well for domestic use in the north of Sudan where the wind is available. The result of this study gave the estimation of proportions of ...
  • Modification and implementation of Data Encryption Standard 
    Ahmed, Galal Abdelhaleim; Supervisor - Osman Mohammed Daffalla (Sudan University of Science and Technology, 2006-01-01)
    This thesis describes some aspects of cryptography i.e. encryption and decryption of a plaintext to a ciphertext using some key that must be kept secret by some means of protection , the thesis is intended to study the ...
  • Furnace Fuel as an Alternative Fuel for Boiler 
    Eltati, Mohamed Elzuber Ahmed (Sudan University of Science and Technology, 2006-11-01)
    One of power plant requirement is the availability and cost of fuel to be used. Sudanese heavy fuel oil (furnace) satisfies these requirements. There are problems in handling and using furnace fuel oil directly in combustion. ...
  • Introcution Motor Speed Control by Using Metal Oxide Semiconductor Feiled Effect Transitor 
    IBRAHIM, KALTHOM ADAM HASSAN; Supervisor - A.ABD ALLA SALIH ALI (Sudan University of Science and Technology, 2007-01-01)
    The electrical motors are very important machine in our live, and they are widely used in the different fields . The alternating current (a.c.) motors and the direct current (d.c.) motors are represent the two main type ...
  • Developing a GIS-based Hydrological Model : With special reference to Darfur region 
    Abdel-Magid, Hisham Isam Mohammed; Supervisor - Abdalla Mohammed Abdle Magid (Sudan University of Science and Technology, 2007-04-01)
    This research work concentrated on using Geographic Information Systems (GIS) techniques to produce digital-hydrological maps and to formulate a useful tool for rainfall-runoff estimation. Produced maps were based on ...

Search SUST


Browse

My Account