Masters Dissertations : Engineering: Recent submissions

  • Improvement of the Design of Rocket Propelled Granite (RPG.7) Main Tube’s Forging Dies 
    Mohammed, Malik El tahir El hadi; Supervisor - Abdel Fattah Bilal (Sudan University of Science and Technology, 2008-05-10)
    A lot of engineering design studies concerned with modifying or improving of the already existing products, rather than searching for producing anew products. This study put full attention to improve or modify the ...
  • Effect of Electrode Position on the Dynamic Behavior of Electrostatistically Actuated MEMSResonators 
    Mohamed, Mohamed Ahmed Eshag; Supervisor - MusaabZaroug (Sudan University of Science and Technology, 2014-09-10)
    Electrostatic actuators have major role in many MEMS devices, e.g. sensors, actuators. The amount of applied voltage to an electrostatic micro-actuator has a direct impact on the amplitude ...
  • Reliability Assessment of Khartoum Electricity Distribution Network – A Case Study: ALebour 11KV line 
    Hamed, Abdalwahed Salama Mohammed; Supervisor - Giddani Osman Addalan Kalcon (Sudan University of Science and Technology, 2014-07-20)
    Reliability of distribution systems is an important issue in power engineering for both utilities and customers. Reliability is a key issue in the design and operation of electric power distribution systems and load. ...
  • USEOFMICROCONTROLLERIN GREENHOUSECONTROL 
    Farah, Magda Farah Samil; Supervisor,- AwadallaTaifour Ali Ismail (Sudan University of Science and Technology, 2014-08-10)
    Greenhouseis used to grow plants under controlled climatic conditions for optimum production.This thesis aims to design monitor and controlsystem of temperature,humidity, light intensity and soil moisture of the greenhouse ...
  • Neighbor Cell Interference Minimization Using Uplink Power Control in Long Term Evolution 
    Abdo, Adam Mohamed Ahmed; Supervisor - Mohamed Hussain Mohamed (Sudan University of Science and Technology, 2013-11-01)
    Long Term Evolution (LTE) has been investigated, because of high data rate, low latency and packet optimized radio access technology. While orthogonal frequency division multiple accesses (OFDMA) is used in multiplexing, ...
  • Variables Affecting the Balloon Radius 
    Fadl Elmola., Ishag Abass Ibrahim; Supervisor - Salah A. Mohammed (Sudan University of Science and Technology, 2006-07-10)
    During different manufacturing processes as the yarn drawn foreword at a certain linear velocity, the portion of the yarn between the package and guide eye necessarily attain an angular velocity, through it is rotation ...
  • HAZARDS IN SUDANESE TEXTILE INDUSTRIES 
    abdualmagid, Mai Marouf; Supervisor - Ahmed Hassan El Sheikh (Sudan University of Science and Technology, 2006-05-10)
    The proposed project focuses on the investigations on the hazards in textile enterprises namely causes & remedies. Kinds of the hazards & Factors affecting the level were studied in three factories, two of them for weaving ...
  • Optimization Of Machining Processes Through Simulation Using CAD\CAM – An Application Study 
    Adam, Hamid Abdallah bakar; Supervisor - Elkhawad Ali Elfaki (Sudan University of Science &Technology, 2013-11-01)
    Optimization of NC technology rests in selection of one optimal variant from several possible. Variant theoretically solved in CAD/CAM systems with aid of NC module of CAD/CAM system and module for simulation and verification ...
  • SUDANESE COTTON PROPTIES AND SPCIFICATION 
    HASAB ELRASOUL, EMAD MOHAMMED; Supervisor - HASBO ABD ELBAGI (Sudan University of Science and Technology, 2006-08-10)
    In this study the Cotton properties, qualities, the factor affecting marketing and the bale specifications at the international level were discussed. The Sudanese bale specifications issued by Sudan Cotton Company, ...
  • USE OF PP AND PET WASTE IN CARPET MANUFACTURE 
    Mousa, Enas Ibrahim Ali; Supervisor - Hago Elfadil (Sudan University of Science and Technology, 2006-04-10)
    In this work PET waste in Sudan is found to be more than 12000 ton per year and PP waste more than 17900 ton per year . Most of this waste go to the land which cause environmental problem. Collecting PP and PET waste ...
  • DEVELOPMENT OF COLOUR MATCHING SYSTEM 
    Abu Aglla, Rehab Abd Elhadi Mohammd; Supervisor - Ahmed Ebrahim Ahmed (Sudan University of Science and Technology, 2006-05-10)
    The purpose of this work is to design a simple program which can help in determining the colour recipe of standard shade required. That is through determining the concentrations of the three colours available, and this ...
  • adoption of total quality management CONCEPTS IN SUDANESE TEXTILE MILLS 
    MOHAMED, ABDUL RAHIM MOHAMED AHMED; Ahmed Hassan Elsheikh ,Bakri A/ Rahim; Supervisor - Ahmed Hassan Elsheikh (Sudan University of Science and Technology, 2006-05-10)
    The research focuses in the process of adopting Total Quality Management principles in Sudanese Textile industries and adapting textile mills operations according to these principles looking for continuous quality improvement ...
  • إمكانية تصنيع شعيرات صناعية من البترول السوداني 
    عوض, رمضان محمد احمد; مشرف - احمد حسن الشيخ (جامعة السودان للعلوم والتكنولوجيا, 2006-06-10)
    أجريت هذه الدراسة لتحديد إمكانية إنتاج شعيرات صناعية من البترول السوداني ولمعرفة ما إذا كان البترول السوداني كماً ونوعاً صالحاً لإنتاج هذه الشعيرات كمنتجات نهائية من صناعة البتروكيماويات. ولتحقيق أهداف هذه الدراسة تم ...
  • THE EFFECT OF WET PROCESSING CHEMICALS ON THE HUMAN HEALTH 
    Mohammed, Amna Osman; Supervisor - Ahmed Ibrahim Ahmed (Sudan University of Science and Technology, 2006-06-10)
    Textile wet processes used significant quantities of water and various kind of chemicals marketed under the name textile auxiliaries, to enhance the appearance of the fabric, serviceability, and durability. The chemical ...
  • Revetment by Geotextile 
    Mobark, Amel Sulieman Ahmed; Supervisor - Hashem Ali Salem (Sudan University of Science and Technology, 2006-09-10)
    Geotextiles are being used recently for many purposes because of their reasonable expenses and their high efficiency. As well geotextiles are easier to install. Soil erosion is one of the most serious problems facing ...
  • Recycling of liming solution 
    sharaf, Salma abd Elhafiz; Supervisor - Hago Elfadil Haroun (Sudan University of Science and Technology, 2006-05-10)
    Pollution is one of the problems facing human being and if not controlled it will gradually lead to complicated environmental problems. According to current legislation on the environment tanners are required to reduce ...
  • تطبيق مفهوم إدارة الجودة الشاملة (أبعاد الثقافة التنظيمية) وأثرها على صناعة الغزل والنسيج في السودان دراسة حالة مصنع الغزل الرفيع 
    النور, العوض فتح الرحمن الفكي; مشرف - هاشم علي محمد سالم (جامعة السودان للعلوم والتكنولوجيا, 2008-11-10)
    يهدف هذا البحث لتحليل وتقييم تطبيق إدارة الجودة الشاملة في صناعة الغزل والنسيج في السودان . تم إختيارمصنع الغزل الرفيع بالخرطوم بحري لدراسته كحالة لهذا البحث تتركز مشكلة الدراسة في البحث عن أبعاد الثقافة التنظيمية السائدة ...
  • التصميم الهندسي لطريق (الخرطوم مدني) واثره علي السلامة المرورية 
    اسماعيل, اسماعيل عبد الرحمن; مشرف - عباس بدوي احمد لاظ (جامعة السودان للعلوم والتكنولوجيا, 2013-01-01)
    يشهد السودان تطورا في شتي المجالات وعلي راسها مجال الطرق التي تعتمد عليها التنمية بصورة كبيرة وهي البنيات التحتية التي تكلف الدولة اموالا طائلة . وقد ركز البحث في ربط التصميم الهندسي بالسلامة المرورية حتي يؤدي ...
  • دراسة مواصفات ومقاييس أزياء العمل في السودان "الزى المدرسي كنموذج" 
    عيسى, عبد الله إسحاق إسماعيل; مشرف - حسب الرسول عبد الباقي محمد (جامعة السودان للعلوم والتكنولوجيا, 2009-01-10)
    هذا البحث تناول بالدراسة مواصفات ومقاييس الأزياء عموما وأزياء العمل بصورة خاصة بالتركيز على الزي المدرسي وأزياء قوات الشرطة والقوات المسلحة لمعرفة مدى تطابقها للمواصفات القياسية ثم تحديد الأنسب منها وفقا للظروف المناخية ...
  • Implementation of Total Quality Management at Construction Stage by Implementing Critical Success Factors in the Sudanese Companies at Khartoum State 
    DafAlla, Nuha Azhari; Supervisor - Awad Saad Hassan (Sudan University of Science and Technology, 2014-04-10)
    The aim of this research is to carry out an empirical study on the determinants of TQM in the Sudanese Construction Companies. The main contribution of this thesis is to persuade managers to take a serious attention on the ...

Search SUST


Browse

My Account