Bachelor of Engineering: Recent submissions

  • Short-Term Load Forecasting Using Artificial Neural Network Technique 
    HUSSAIN, AL HUSSAIN MUHAMMAD AL HASSAN AL; DAFALLA, DAFALLA ELRASHEED ELGAILY; ABAAS, OSAAMA ABAAS MUHAMMAD; IDRIS, SHAIKH IDRIS JAMAL ALDEEN AL SHAIKH; Supervisor-, Mohammad Osman Hassan (Sudan University of Science and Technology, 2017-10-01)
    This project focused on short-term load forecasting [STLF] in power system operations. Load forecasting is future demand prediction, which assumes an essential part ofpower system management. Short term load forecasting ...
  • Assessment of PSS Performance for Damping Low Frequency Oscillations in power system 
    Mustafa, Abubakr Mahjoub Mohammed; Osman, Osman Hassan khader; Abdlmoneam, Azzam Emad Aldeen; Mohammed, Mohammed Amin khidir; Supervisor-, Mohammed Osman Hassan (Sudan University of Science and Technology, 2017-10-01)
    The power system consists of a number of synchronous generators in different power stations that rotate at synchronous speeds to feed the required loads in case of the stability. However, when these loads change or fault ...
  • Optimized PV-Generator Hybrid System with the Local Grid 
    Abu-Bakr, Ahmed Omer Mahmoud; Omer, Muhammad Hashem Abd-Alateef; Taha, Moataz Mutwakel Ibrahim; Yousif, Najm-aldeen Ahmed Alzeber; Supervisor-, Nagm Al-deen Abdu Mustafa (Sudan University of Science and Technology, 2017-10-01)
    The development of any country or society depends on how sufficient electrical energy it has. Most of the energy needs of the world are being fulfilled by non-renewable sources of energy which it is in short supply and ...
  • Design and Implementation of Wireless Omnidirectional Power Transfer System using Inductive Coupling 
    Abdallah, Amar Ahmed Ali; Ali, Sara Hamza Khamis; Eldoma, Islam Aboud Adam; Mohammed, Ahmed Hassan Saad; Supervisor-, Awadalla Taifour Ali (Sudan University of Science and Technology, 2017-10-01)
    Wireless Power Transfer (WPT) through inductive coupling could be one of the next prominent technologies that is widely used in the near future. However most WPT systems used today involve flat spiral coils that are suitable ...
  • Pitch Control of Horizontal Axis Wind Turbines 
    Omer, Adam Omer Elshaib; Ahmed, Almegdad Ahmed Suliman; Omer, Dafalla Osman Alhadi; Mohammed, Muhand AbdelRahman Ahmed; Supervisor-, Nagm Eldeen Abdo Mustafa Hassanian (Sudan University of Science and Technology, 2017-10-01)
    In recent years due to diminishing fossil fuels and environmental concerns wind power has become a popular renewable energy source. Pitch control is important for wind turbines to extract maximum power from available ...
  • Design and Implementation of Non- Stopping Electric Train System 
    Kafi, Abubaker Siddig Fadlelmola; Hussein, Mohammed Basheer Aldaleel; Bakheet, Mohammed alawab Abdelgader Hassan; Abdelraheem, Muaz Abdelrahman Abbas; Supervisor-, Awadalla Taifour Ali (Sudan University of Science and Technology, 2017-10-01)
    This project concerned with study and design of electric train system work inside large cities without stopping in the stations but decrease its speed only. The passengers get up the train and left it automatically by ...
  • Implementation of Wireless Controlled Monitoring Mobile Robot 
    Ageep, Abdullah Osman Alhassan; Daldoum, Ahmed Mahmoud Ahmed; Abdalla, Hatim Abdalla Alhassan; Ismail, Mubark Mohammed El-murtada Mubark; Supervisor-, Galal Abdalrahman Mohammed Hammad (Sudan University of Science and Technology, 2017-10-01)
    Robot is an automatic industrial machine replacing the human in hazardous work. In dangerous places humans cannot reach robots can help a lot to know what is going on this place. The project aims to implement a robot that ...
  • Design and Fabricate of Solar Thermal Tracker Using Fresnel Lens 
    HamdElnil, Abubakr Mohamed Ahmed; Ahmed, Amna AbdAlbagi Mohamed; FdlAllaa, Mohamed Shaaeldeen Ibrahim; Alhadi, Rofida Ibrahim Babeker; Supervisor-, A.A.A.AbuElnuor (Sudan University of Science and Technology, 2017-10-01)
    The sun is the source of life of the earth if otherwise it did not find life in its present form on the surface of our planet, has realized since ancient times the importance of the sun in his life and spare no effort to ...
  • Design and performance analysis of biogasdiesel dual fuel generation system 
    Ahmed, Ali Abdulaal Ali Said; Mohammed, Khalid Adil Ali; Ahmed, Mohammed Hashim Homeidah; Hassan, Omer Hashim Abdelraziq; Supervisor-, Al Fadil Zachariah Yahia (Sudan University of Science and Technology, 2017-10-01)
    Biogas is produced by anaerobic digestion of various organic substances such as kitchen wastes, agricultural wastes, municipal solid wastes, and cow dung. Biogas has a good ability of formatting homogeneous mixture with ...
  • Dynamic Analysis of Three Phase Induction Motor 
    Al-basheer, Abd-Allah Atta Hamad; Dafu-Allah, DeyaaEddien Abd-Elmonem Ahmed; Abd-Al-Majed, Izzeldin El-Ajab Al-sheikh; Abd-Alrahman, Mohammed Al-Tahir Mohammed; Supervisor-, Maha Osman Mohammed AbuElaas (Sudan University of Science and Technology, 2017-10-01)
    Induction machines are considered the most commonly used electrical machines, which are mainly used as electrical induction motors. Starting the induction motor is the most important and dangerous step. The theory behind ...
  • Design of a Stand-alone Solar PV System 
    Ibrahim, Gassan Faisal Abdalla; Mohamed, Hassan Hamdan Ibrahim; Salih, Mohamed Adam Ali; Ahmed, Tarig Alawad Mohamed; Supervisor-, Nagm Aldeen Abdo Mustafa (Sudan University of Science and Technology, 2017-10-01)
    The frequent power outages from university is delaying learning process and make the environment unsuitable for studying. By using an independent source of supply the frequent power outages are stopped. The independent ...
  • Speed Control of Brushless DC Motor using PID Controller 
    Talha, Ahmed Abdualrheem Mohammed; Basheer, Amna Basheer Alhaj Muhammed; Ibrahim, Mohammed Abduallah abdurhman; Alsheikh, Mohammed Issam Alrsheed; Supervisor-, Awadalla Tayfor Ali (Sudan University of Science and Technology, 2017-10-01)
    Since the beginning of the 19th century progress has increased in scientific and practical life. There are many requirements, including control systems. The Brushless DC motor is one of the most commonly used engines in ...
  • DESIGN AND IMPLEMENTATION OF TWO WHEELED SELF BALANCING ROBOT USING PID CONTROLLER 
    Ahmed, Osman Mohammed Elamin Khidir; El-Amin, El-Amin Omer Mohammed; Salem, Asaad Salem Abdurraheem; Mohammed, Ahmed Mohammed Osman; Supervisor-, Awadalla Taifour Ali (Sudan University of Science and Technology, 2017-10-01)
    The dynamics of the two-wheeled self-balancing robot system is similar to that of the inverted pendulum, which is unstable and prone to tip over. The inverted pendulum is a classic problem in dynamics and control theory, ...
  • BUILDING MANAGEMENT SYSTEM USING INTERNET OF THINGS (IOT) 
    Othman, Ahmed Ibrahim Ali; Mohammed, Mohammed AlmustafaAnwor Mahmoud .; Ahmed, MostafaMukhtarYousif .; Adam, Weam Ahmed Salim; Supervisor-, GaffarBabiker (Sudan University of Science and Technology, 2017-10-01)
    Modern building such as hotels, banks, hospitals and large companies contains lights, lifting air-conditioning, fire alarm systems and security systems. To control these applications a building management system accomplishes ...
  • Smart shoes for cell phone charging 
    Alli, Mugtaba ali mohammed khair; makki, Mohammed osama Hassan; Alli, Mohammed ali albasheer; mohammed, Mazen mohmmed abdalmgeed; Supervisor-, alfadil zakrya (Sudan University of Science and Technology, 2017-10-01)
    A major application of energy-harvesting technology is to power portable and wearable consumer electronics. We report a packaged power-generating insole with built-in flexible multi-layered triboelectric nanogenerators ...
  • Design and Implementation Rubbish Separation Control System 
    Ahmed, Alhadi Mohammed Alamin Muzamel; Jebreel, Altejani Mohy El-deen Mohammed; Alhassan, Mohammed Ali Mohammed; Hamadoba, Mohammed Hussain Mustafa; Supervisor-, Awdalla Taifour Ali (Sudan University of Science and Technology, 2017-10-01)
    Traditional rubbish separation systems requires a lot of time and effort with low efficiency and cost-effective because of its reliance on the human element. The main objective of this project is to develop the traditional ...
  • PASSWORD BASED CIRCUIT BREAKER 
    Abbas, Abubakr Khalid Omer; Mohammed, Alfyad Alfatih Yousif; Shreef, Ghaith Alfatih Mohammed; Supervisor-, Maha Osman Mohammed (Sudan University of Science and Technology, 2017-10-01)
    This project focuses on the safety of the lineman while working, so they do not feel the sudden electric shocks. As the lineman has to deal with live wires very often, the probability of critical accidents are already ...
  • Implementation of over-voltage & undervoltage protection system 
    alamin, Yousif Abdalbagi alsiddig; Yahiya, Wael Aboalgasim Ahmed; Mohammed, Mohammed Othman Salih; Supervisor-, MAHA OTHMAN MOHAMMED (Sudan University of Science and Technology, 2017-10-01)
    Overvoltage and undervoltage are quality problems, they happen due to many reasons. The effects of overvoltage and undervoltage can be severe and can cause insulation failure in case of overvoltage and overheating and ...
  • GSM Based CarSecurity Control System 
    Ali, Amjed Abbas Abdelwahab; Mohammed, Issa Mohammed KheirIssa; Altoum, Mohammed Briar Omer; Fadil, Mohammed Hassan Aboalhassan; Supervisor-, GaffarBabiker Osman (Sudan University of Science and Technology, 2017-10-01)
    Hundreds of Car theft are reported each year in Sudan, and the number is still increasing. If not recovered soon, stolen vehicles are generally sold, revamped or even burned if the resale price is considered too low. Once ...
  • DC-Motor Control of Speed Using FUZZY-PID Controller 
    Ahmed, Ahmed Alhussain Ali; Abdullah, Samar Mohammed; Ali, Mohamed Omer Babiker Mohamed; Abdulrahman, Abdulmajeed Abdulmonim Abdullatif; Supervisor-, Galal Abdalrahman Mohammed (Sudan University of Science and Technology, 2017-09-01)
    There are many problems in obtaining very fast speed in some production processes. Many sensitive areas need a very precise and precise speed, for example in the medical fields (pharmaceutical industry, droplets, and ...

Share

Search SUST


Browse

My Account