Rehabilitation of the Control Unit of the CNC Milling Machine : Model F-V0-A2F

Ibrahim, Nadir Abdalrazig Siddige; Supervisor - Elkhawad Ali Elfaki

dc.contributor.author	Ibrahim, Nadir Abdalrazig Siddige
dc.contributor.author	Supervisor - Elkhawad Ali Elfaki
dc.date.accessioned	2014-11-11T07:20:28Z
dc.date.available	2014-11-11T07:20:28Z
dc.date.issued	2010-04-01
dc.identifier.citation	Ibrahim,Nadir Abdalrazig Siddige.Rehabilitation of the Control Unit of the CNC Milling Machine : Model F-V0-A2F/Nadir Abdalrazig Siddige Ibrahim;Elkhawad Ali Elfaki.-Kartoum:Sudan University of Science and Technology,College of Engineering,2010.-127P. : ill. ; 28Cm.-M.Sc.	en_US
dc.identifier.uri	http://repository.sustech.edu/handle/123456789/7941
dc.description	Thesis	en_US
dc.description.abstract	The control unit of model F-V0-A2F milling machine that belongs to the Mechanical Engineering Department of Sudan University of Science and Technology was rehabilitated. The control unit under study controls the motion of the stepper motors driving the linear axis X, Y, Z, in addition to the spindle motor and the coolant system, via a programmed typed through its key boards. The power supply and the stepper motors driving circuits were replaced by those obtained from a crippled lathe machine. Anew control cabinet was build. MACH3 software was configured and used as an interfacing program. The rehabilitated milling machine was tested and found to perform nicely.	en_US
dc.description.sponsorship	Sudan University of Science and Technology	en_US
dc.language.iso	en	en_US
dc.publisher	Sudan University of Science and Technology	en_US
dc.subject	Mechanical Engineering	en_US
dc.subject	Mechanical Engineering - production	en_US
dc.subject	Milling Machine	en_US
dc.subject	Model F-V0-A2F	en_US
dc.subject	Control Unit	en_US
dc.title	Rehabilitation of the Control Unit of the CNC Milling Machine : Model F-V0-A2F	en_US
dc.title.alternative	إعادة تأهيل وحدة تحكم لماكينة تفريز ذات تحكم رقمي(ماركة F-V0-A2F)	en_US
dc.type	Thesis	en_US