Manufacture of Sole from Leather and Rubber Wastes blends

Elsiddig, M. E.; ElAmin, I. H. Mohamed; Gasmelseed, G.A.

dc.contributor.author	Elsiddig, M. E.
dc.contributor.author	ElAmin, I. H. Mohamed
dc.contributor.author	Gasmelseed, G.A.
dc.date.accessioned	2019-08-21T10:39:06Z
dc.date.available	2019-08-21T10:39:06Z
dc.date.issued	2019-06-01
dc.identifier.citation	Elsiddig .M.E. Manufacture of Sole from Leather and Rubber Westes Blends/ M. E. Elsiddig, I. H. Mohamed ElAmin, G.A. Gasmelseed.- vol 20 , no 1.- article	en_US
dc.identifier.issn	1858-6716
dc.identifier.uri	http://repository.sustech.edu/handle/123456789/23164
dc.description.abstract	The aim of this Study was to manufacture sole from buffing leather waste and buffing rubber waste. Through tanning process a large amount of solid waste produced from leather manufacturing. Leather buffing dust is a waste from buffing operations and constitutes an important part of solid wastes. The leather and rubber buffing wastes resulted from buffing machine were blended and mixed with Polyurethane adhesive in different formulations. Mechanical properties of experimental footwear sole, such as tensile strength, elongations and hardness. Density test was determined as a physical test. The leather and rubber buffing wastes were blended successfully and the result showed that, tensile strength was 28.8 (kg/cm2), elongation 50 (%), hardness 81 (shore A) and density 0.91 (gm/cc). It is concluded the optimum different composition of leather and rubber buffing wastes blends (leather\rubber 50:50) provided good mechanical and physical properties of sole.	en_US
dc.description.sponsorship	Sudan university of science and technology	en_US
dc.language.iso	en	en_US
dc.publisher	Sudan University of Science and Technology	en_US
dc.subject	leather waste	en_US
dc.subject	rubber waste	en_US
dc.subject	sol e	en_US
dc.subject	composites	en_US
dc.title	Manufacture of Sole from Leather and Rubber Wastes blends	en_US
dc.type	Article	en_US