Masters Dissertations : Engineering Technology Industries: Recent submissions

  • THE EFFECTS OF LINEAR LOW-DENSITY POLYETHYLENE (LLDPE) ON THE MECHANICAL PROPERTIES OF LOW-DENSITY POLYETHYLENE (LDPE) FILM BLENDS 
    Marhom, Mustafa Yousif Bakhet; Supervisor, - Mohamed Deen Hussien (Sudan University of Science and Technology, 2017-09-10)
    Plastic filed has become most usable in all industries plastic products vary depending on the machine used in production process. In film industry there are different type of material can be use , like HDPE, LDPE.LLDPE ...
  • An Analytical Study of the Combined Process Of Bottles Production 
    Ahmed, Osama Hakim Mirghani Hakim; Supervisor, - Mohamed Deen Hussein Mohamed (Sudan University of Science and Technology, 2017-09-10)
    This research study process of combined process of injection of preform and immediately then blowing of these preform on the same machine. Such a process has its advantages compared with the traditional sequence of preform ...
  • Reduction of Plastic Film Waste Using Quality Control Tools 
    Ali, Musab Khalafalla Elfadil; Supervisor, - Ahmed Ibrahim Seedahmed (Sudan University of Science and Technology, 2017-09-10)
    The field of quality undergoes significant changes as reflected by changes in its definition, approaches, techniques, and scope of application. Changes in customer expectation. This also calls for special attention to the ...
  • A Study of Producing High Strength Concrete By using Silica Fume and Super Plasticizer 
    Mohammed, zeinab Mustafa Suliman (Sudan University of Science and Technology, 2017-05-10)
    The aim of this study was to evaluate the performance of high strength Concrete (HSC) containing supplementary cementations materials (Silica Fume) and to find optimum range of silica fume content in the mix. In these ...
  • Viscoelasticity ˗ plastic behavior of fiber˗ reinforced polymer composites 
    ABdalla, Eltoma Sedeeg Eltahir; Supervisor,- Isam Abbeker Ishag (Sudan University of Science and Technology, 2016-08-10)
    Fiber Reinforced Polymer (FRP) composites widely use in different fields such as, aerospace industries; automotive, water tank; marines; and building, etc. The current studies give a brief account of analysis of static ...
  • Study of Pressure Drop and Losses in Poly Propylene Pipes 
    HAMED, MUZAKER SULEMAN; Supervisor,- Arman Mohammed Abdalla (Sudan University of Science and Technology, 2016-02-10)
    While transporting liquid in pipes, energy loss due to friction between pipe wall and liquid molecules all through the pipe and also with the sudden change in flow direction which happen because different fluid tools such ...
  • Determination of the properties ofThermoplastics by Differential Thermal Analysis 
    Adam, Eltayeb Abdurrahman Hamid; Supervisor - Mohamed Deen Hussein Mohamed (Sudan University of Science and Technology, 2014-04-11)
    The purpose of this research is to use Differential Scanning Calorimetry to find numerous thermal properties of a number of polymer samples. The credibility of the Differential Scanning Calorimetry device to be used was ...
  • Detection of Thermoplastic Degradation 
    EL-Radi, Alaa Ibrahim Mohammed; Supervisor - Mohammed Deen Hussein Mohammed (Sudan University of Science and Technology, 2014-05-11)
    The degradation of HDPE was studied by exposing HDPE to weathering. The HDPE were prepared at Adeb Plastic Factory in Omdurman. Four types of HDPE were use in this study:  Virgin HDPE.  50/50 mixture of recycle and ...
  • Comparison Between Wood Plastic Composites(WPCs) And Woods 
    Salim, Wala Salah; Supervisor - IsamAbbakarIshag (Sudan University of Science and Technology, 2014-03-11)
    Composites can be defined as materials that consist of two or more chemically and physically different phases separated by a distinct interface. The different systems are combined judiciously to achieve a system with more ...
  • Stress properties of plastic pipe under constant pressure in the long term 
    Agaballh, Salma Agaballh Ali; Supervisor - Mohamed Deen Hussien (Sudan University of Science and Technology, 2014-05-10)
    Due to its durability, plastics pipes are normally used for water transport. It replaced the metal pipes .the long term hydrostatic pressure test according to ASTMD2837-02 and EN921 -1994 requires very long periods for ...
  • Viscosity Measurement by using Melt flow Index for Thermoplastic polymers 
    Mohamed, Maysaa Elrasheed Rahamtalla; Supervisor - Mohamed Deen Hussein Mohamed (Sudan University of Science and Technology, 2014-04-10)
    In plastics manufacturing, the melt flow index (MFI) is used as a routine indicator of rheological behavior when more expensive and laborious determinations of well-defined material functions are impractical. The MFI is the ...
  • Factors Effecting Bulk Density of Expandable Polystyrene on Pre-expansion Process 
    Ahmed, Gehan Elsayed Yousif; Supervisor - Abdalfatah Belal Abd AlsLam (Sudan University of Science and Technology, 2014-06-10)
    The expandable polystyrene is a light weight material which has been widely used in constructions, packaging and Marines devices. The manufacturing of the expanded polystyrene products is a multi-step process that depends ...

Share

Search SUST


Browse

My Account